Search Results

This standard is primarily intended to apply to new parts and products intended to be produced in an on-going production phase, but can also be applied to parts currently in production (e.g., manufacturing, maintenance). The standard is applicable to all production processes that influence the variation of KCs, as well as maintenance and service processes in which KCs are identified. It applies to organizations for assemblies and all levels of parts within an assembly, down to the basic materials including castings and forgings, and to organizations that are responsible for producing the design characteristics of the product. The variation control process begins with product definition, typically stated in the design documentation (e.g., digital model, engineering drawing, specification) which identifies KCs, and leads to a variation management process for those KCs. This process may also be used for producer-identified KCs (e.g., process KCs, additional/substitute product KCs).

This standard defines uniform quality and technical requirements relative to metallic parts marking performed using "data matrix symbology" within the aviation, space, and defense industry. ISO/IEC 16022 specifies general requirements (e.g., data character encodation, error correction rules, decoding algorithm). In addition to ISO/IEC 16022 specification, part identification with such symbology is subject to the requirements in this standard to ensure electronic reading of the symbol. The marking processes covered by this standard are as follows: Dot Peening Laser Electro-Chemical Etching Further marking processes will be included, if required. Unless specified otherwise in the contractual business relationship, the company responsible for the design of the part shall determine the location of the data matrix marking. Symbol position should allow optimum illumination from all sides for readability. This standard does not specify information to be encoded.

This standard includes selected quality system requirements from ISO 9001:2008[1] and AS9100:2009 applicable to noncomplex products and associated manufacturing processes. ISO 9001 text incorporated into this standard appears in standard font; while aviation, space, and defense industry additional requirements, definitions, and notes are presented in bold, italic text. The requirements of this standard are intended to be applied in whole, without any exclusions. Compliance with all corresponding AS9100 requirements is considered to meet/exceed compliance with the requirements of this standard. The requirements specified in this standard are complementary (not alternative) to contractual and applicable statutory and regulatory requirements. Should there be a conflict between the requirements of this standard and applicable statutory or regulatory requirements, the latter shall take precedence. The process approach described in ISO 9001 and AS9100 applies to this standard.

This document is limited to the aerospace industry, where an approved manufacturer requests a supplier to ship an article against the approved manufacturer’s quality system directly to a customer. The direct ship process is not required or applicable to standard parts or military parts. In this process, the approved manufacturer is responsible for assurance that the article conforms to type design information.

This standard defines the common nonconformity data definition and documentation that shall be exchanged between an internal/external supplier or sub-tier supplier, and the customer when informing about a nonconformity requiring formal decision. The requirements are applicable, partly or totally, when reporting a product nonconformity to the owner or operator, as user of the end item (e.g., engine, aircraft, spacecraft, helicopter), if specified by contract. Reporting of nonconformity data, either electronically or conventionally on paper, is subject to the terms and conditions of the contract. This also includes, where applicable, data access under export control regulations.

Limited to the commercial aerospace industry where a request is made for a PO to have Direct Delivery Authorization (DDA), which includes an Appropriate Arrangement (AA) between the PO and the Design Organization (DO). In this process the DO is responsible for ensuring the continuous updating of design and airworthiness data to the PO, whilst the PO is responsible for assurance that the manufactured article conforms to approved design and airworthiness data. The PO is responsible to provide airworthiness release documentation.

This SAE Aerospace Recommended Practice (ARP) specifies for quality requirements that are additive to a procurement document or contract, where an organization: a needs to provide additional guidance for suppliers and other organizations in the delivery of products, goods and services in accordance with stated quality demands, and b needs to provide information in addition or in absence of existing quality system requirements to provide the assurance of conformity to customer and applicable regulatory requirements. NOTE: In this ARP, the term ‘product’ applies only to the product intended for, or required by, a customer.

This document is intended to prescribe consistent requirements for CSI management for organizations and suppliers who perform work for prime contractors receiving direct contracts from U.S. government agencies (i.e., first-tier or prime suppliers).

This standard establishes requirements for performing and documenting APQP and PPAP. APQP begins with conceptual product needs and extends through product definition, production planning, product and process validation (i.e., PPAP), product use, and post-delivery service. This standard integrates and collaborates with the requirements of the 9100, 9102, 9103, and 9110 standards. The requirements specified in this standard are complementary (not alternative) to contractual and applicable statutory and regulatory requirements. Should there be a conflict between the requirements of this standard and applicable statutory or regulatory requirements, the latter shall take precedence.

This standard defines a system for the qualification of standard products for aviation, space, and defense applications. It defines the principles that shall be adhered to when carrying out product qualification; applied in conjunction with the rules and procedures of the CA. The system enables the CA to confirm compliance is achieved and maintained, in accordance with the requirements of its product definition and associated controlling technical specifications by an Original Component Manufacturer (OCM) of standard products. This standard requires an OCM that has been granted product qualification approval to ensure applicable approvals are maintained and renewed in accordance with the CA’s quality system for that qualified product. OCMs and OCM designated Value Added Distributors (VADs) requesting product qualification to this standard, shall as a prerequisite, maintain 9100 standard quality management system certification approval.

This standard establishes the baseline requirements for performing and documenting FAI. Should there be a conflict between the requirements of this standard and applicable statutory or regulatory requirements, the applicable statutory or regulatory requirements shall take precedence.

Limited to the aerospace industry, where an approved manufacturer requests a supplier to ship an article against the approved manufacturer’s quality system directly to a customer. The direct ship process is not required or applicable to standard parts or military parts. In this process the approved manufacturer is responsible for assurance that the article conforms to type design information.

This standard defines the common nonconformance data definition and documentation that shall be exchanged between an internal/external supplier or sub-tier supplier, and the customer when informing about a nonconformity requiring formal decision. The requirements are applicable, partly or totally, when reporting a product nonconformity to the owner or operator, as user of the end item (e.g., engine, aircraft, spacecraft, helicopter), if specified by contract. The process of exchanging, coordinating, and approving nonconformance data varies with the multiple relationships and agreements among all parties concerned. The information provided by this standard forms guidelines for submitting and managing of data through accurate communication. The main objective is to provide the definition of a data set that can be integrated into any form of communication (e.g., electronic data interchange, submission of conventional paper forms).

This standard includes selected quality system requirements from ISO 9001:2008[1] and AS9100:2009 applicable to noncomplex products and associated manufacturing processes. ISO 9001 text incorporated into this standard appears in standard font; while aviation, space, and defense industry additional requirements, definitions, and notes are presented in bold, italic text. The requirements of this standard are intended to be applied in whole, without any exclusions. Compliance with all corresponding AS9100 requirements is considered to meet/exceed compliance with the requirements of this standard. The requirements specified in this standard are complementary (not alternative) to contractual and applicable statutory and regulatory requirements. Should there be a conflict between the requirements of this standard and applicable statutory or regulatory requirements, the latter shall take precedence. The process approach described in ISO 9001 and AS9100 applies to this standard.

This standard defines the common nonconformance data definition and documentation that an internal or external supplier or sub-tier supplier must submit when informing a customer of a nonconformity. The requirements shall be are applicable for reporting a nonconforming product to the owner/operator (i.e., end item user), if specified by contract. Reporting of nonconformance data, either electronically or conventionally on paper, is subject to the terms and conditions of the contract. This also includes, where applicable, data access under export control regulations.

This standard defines the common nonconformance data definition and documentation that an internal or external supplier or sub-tier supplier must submit when informing a customer of a nonconformity. The requirements shall be are applicable for reporting a nonconforming product to the owner/operator (i.e., end item user), if specified by contract. Reporting of nonconformance data, either electronically or conventionally on paper, is subject to the terms and conditions of the contract. This also includes, where applicable, data access under export control regulations.

This SAE Aerospace Recommended Practice (ARP) specifies for quality requirements that are additive to a procurement document or contract, where an organization: a needs to provide additional guidance for suppliers and other organizations in the delivery of products, goods and services in accordance with stated quality demands, and b needs to provide information in addition or in absence of existing quality system requirements to provide the assurance of conformity to customer and applicable regulatory requirements. NOTE: In this ARP, the term ‘product’ applies only to the product intended for, or required by, a customer.

The purpose of ARP9013/2 is to ensure conformance for each product characteristic being verified in each lot in the series. ARP9013/2 document specifies a product acceptance system using either attribute or variable lot acceptance methods documented in ANSI/ASQC Z1.4, ANSI/ASQC Z1.9, and “Zero Acceptance Number Sampling Plans” by Nicholas L. Squeglia.

The purpose of ARP9013/4 is to ensure conformance for each product characteristic being verified under these methods. ARP9013/4 provides the requirements for continuous sampling, skip-lot sampling, and for statistical methods for product acceptance that do not derive from industry standard tables.

This SAE Aerospace Recommended Practice (ARP) establishes the general requirements when implementing any of the statistical product acceptance methods as defined in ARP9013/1, ARP9013/2, ARP9013/3, and ARP9013/4. This recommended practice also establishes the minimum content required to be covered in an organization’s documented procedures that govern their application of statistical product acceptance methods. These general requirements and documented procedures apply the requirements of AS9100 plus requirements for retrievability, safety/critical characteristics, quality parameters, and that these parameters protect the customer. This recommended practice is to be used in conjunction with the variety of sampling strategies, statistical techniques, and process control methods of the ARP9013/1 through ARP9013/4 recommended practices as chosen by the organization.