Search Results

This SAE Recommended Practice establishes the test procedure, environment, and instrumentation for determining the maximum exterior sound level of highway motor trucks and truck tractors over 4540 kg gross vehicle weight rating (GVWR) with governed engines under stationary vehicle conditions. The basic procedure involves a full throttle engine acceleration and a closed throttle deceleration with the engine inertia as the load.

This SAE Standard is equivalent to ISO 362-1:2015 and specifies an engineering method for measuring the noise emitted by road vehicles of categories M and N under typical urban traffic conditions. It excludes vehicles of category L1, L2, L3, L4, and L5. The specifications are intended to reproduce the level of noise generated by the principal noise sources during normal driving in urban traffic. The method is designed to meet the requirements of simplicity as far as they are consistent with reproducibility of results under the operating conditions of the vehicle. The test method requires an acoustical environment that is obtained only in an extensive open space. Such conditions are usually provided for during: Measurements of vehicles for regulatory certification and/or type approval. Measurements at the manufacturing stage. Measurements at official testing stations.

This SAE Recommended Practice establishes the test procedure, environment, instrumentation, and data analyses for comparing interior sound level of passenger cars, multipurpose vehicles, and light trucks having gross vehicle weight rating (GVWR) of 4540 kg (10 000 lb) or less. The test procedure is characterized by having fixed initial conditions (specified initial vehicle speed and gear selection at the starting point on the test site) to obtain vehicle interior sound measurement during road load operation over various road surfaces at specified constant speeds. The measurement data so derived is useful for vehicle engineering development and analysis.

This SAE Standard is equivalent to ISO 362-1:2015 and specifies an engineering method for measuring the noise emitted by road vehicles of categories M and N under typical urban traffic conditions. It excludes vehicles of category L1, L2, L3, L4, and L5. The specifications are intended to reproduce the level of noise generated by the principal noise sources during normal driving in urban traffic. The method is designed to meet the requirements of simplicity as far as they are consistent with reproducibility of results under the operating conditions of the vehicle. The test method requires an acoustical environment that is obtained only in an extensive open space.

This procedure provides for the measurement of the sound generated by a test tire, mounted on a single-axle trailer, operated at multiple speeds.

This SAE Standard establishes the test procedure, environment, and instrumentation for determining the exterior sound level for passenger cars, multipurpose vehicles, and light trucks having a gross vehicle mass rating of 4540 kg or less. The test procedure is characterized by having fixed initial conditions, i.e., an as-specified initial vehicle speed and gear selection at a fixed start point on the test site. Full-throttle acceleration and closed-throttle deceleration of the vehicle are included in this procedure. Sound levels determined in accordance with this document are dependent on the performance capability of the test vehicle, as influenced by power-to-mass ratio and overall powertrain gear ratio.

This SAE Recommended Practice establishes the test procedure, environment, and instrumentation to be used for measuring the exterior exhaust sound level for passenger cars, multipurpose vehicles, and light trucks under stationary conditions providing a continuous measure of exhaust system sound level over a range of engine speeds. This document applies only to road vehicles equipped with an internal combustion engine. The method is designed to meet the requirements of simplicity as far as they are consistent with reproducibility of results under the operating conditions of the vehicle.

This SAE Standard is equivalent to ISO 362-1:2007 and specifies an engineering method for measuring the noise emitted by road vehicles under typical urban traffic conditions. The specifications are intended to reproduce the level of noise which is generated by the principal noise sources during normal driving in urban traffic. The method is designed to meet the requirements of simplicity as far as they are consistent with reproducibility of results under the operating conditions of the vehicle. The test method requires an acoustical environment which is only obtained in an extensive open space. Such conditions are usually provided for during: measurements of vehicles for regulatory certification measurements at the manufacturing stage measurements at official testing stations The results obtained by this method give an objective measure of the noise emitted under the specified conditions of test.

This SAE Recommended Practice establishes the test procedure, environment, instrumentation, and data analyses for comparing interior sound level of passenger cars, multipurpose vehicles, and light trucks having gross vehicle weight rating (GVWR) of 4540 kg (10 000 lb) or less. The test procedure is characterized by having fixed initial conditions (specified initial vehicle speed and gear selection at the starting point on the test site) to obtain vehicle interior sound measurement during road load operation over various road surfaces at specified constant speeds. The measurement data so derived is useful for vehicle engineering development and analysis.

This procedure provides for the measurement of the sound generated by a test tire, mounted on a single-axle trailer, operated at multiple speeds.

This SAE Recommended Practice establishes the test procedure, environment, and instrumentation for determining the maximum exterior sound level of highway motor trucks and truck tractors over 4540 kg gross vehicle weight rating (GVWR) with governed engines under stationary vehicle conditions. The basic procedure involves a full throttle engine acceleration and a closed throttle deceleration with the engine inertia as the load.

This SAE Recommended Practice establishes the test procedure, environment, and instrumentation to be used for measuring the exterior exhaust sound level for passenger cars, multipurpose vehicles, and light trucks under stationary conditions providing a continuous measure of exhaust system sound level over a range of engine speeds. This sound level measurement procedure has been developed for use in engineering evaluation of the sound level performance of passenger car and light truck exhaust systems. It provides the means for detecting exhaust system resonances with the potential to affect both exterior and interior sound quality. This document incorporates certain provisions of ISO 5130-1982-02-15, for measuring the sound level of exhaust systems. (See Appendix A.)

This SAE Standard establishes the test procedure, environment, and instrumentation to be used for measuring the exhaust sound level for passenger cars, multipurpose vehicles, and light trucks under stationary conditions. Measurements are taken under steady-state conditions. In this respect, this procedure differs from ISO 5130 which includes measurements under the dynamic conditions of an engine deceleration. This sound level measurement procedure has been developed as a guide for governmental agencies establishing vehicle in-service sound level regulations and enforcement measurement procedures. It is directed at the assessment of vehicle exhaust noise and is not intended to determine maximum vehicle sound levels. (See Appendix A.)

This SAE Standard establishes the test procedure, environment, and instrumentation for determining the exterior sound level for passenger cars, multipurpose vehicles, and light trucks having a gross vehicle mass rating of 4540 kg or less. The test procedure is characterized by having fixed initial conditions, i.e., an as-specified initial vehicle speed and gear selection at a fixed start point on the test site. Full-throttle acceleration and closed-throttle deceleration of the vehicle are included in this procedure. Sound levels determined in accordance with this document are dependent on the performance capability of the test vehicle, as influenced by power-to-mass ratio and overall powertrain gear ratio.

This SAE Recommended Practice establishes the test procedure, environment, and instrumentation to be used for measuring the exterior exhaust sound level for passenger cars, multipurpose vehicles, and light trucks under stationary conditions providing a continuous measure of exhaust system sound level over a range of engine speeds. This sound level measurement procedure has been developed for use in engineering evaluation of the sound level performance of passenger car and light truck exhaust systems. It provides the means for detecting exhaust system resonances with the potential to affect both exterior and interior sound quality. This document incorporates certain provisions of ISO 5130-1982-02-15, for measuring the sound level of exhaust systems. (See Appendix A.)

This SAE Standard establishes the test procedure, environment, and instrumentation to be used for measuring the exhaust sound level for passenger cars, multipurpose vehicles, and light trucks under stationary conditions. Measurements are taken under steady-state conditions. In this respect, this procedure differs from ISO 5130 which includes measurements under the dynamic conditions of an engine deceleration. This sound level measurement procedure has been developed as a guide for governmental agencies establishing vehicle in-service sound level regulations and enforcement measurement procedures. It is directed at the assessment of vehicle exhaust noise and is not intended to determine maximum vehicle sound levels. (See Appendix A.)

This SAE Standard establishes the test procedure, environment, and instrumentation for determining the exterior sound level for passenger cars, multipurpose vehicles, and light trucks having a gross vehicle mass (weight) rating of 4540 kg (10 000 lb) or less. The test procedure of this standard is characterized by having fixed initial conditions (specified initial vehicle speed and gear selection at a fixed start point on the test site) in contrast to the procedure of SAE J1030 FEB87, Maximum Sound Level for Passenger Cars and Light Trucks, which has fixed terminal conditions (attainment of rated engine speed at a fixed end point on the test site). Full-throttle acceleration and closed-throttle deceleration of the vehicle are included in both procedures. Sound levels determined in accordance with this standard are dependent on the performance capability of the test vehicle, as influenced by power-to-mass ratio and overall power train gear ratio.

This SAE Standard establishes the test procedure, environment, and instrumentation to be used for measuring the exhaust sound level of passenger cars, multipurpose vehicles, and light trucks under stationary conditions. This sound level measurement procedure has been developed as a guide for governmental agencies establishing in-service sound level limitations and enforcement measurement procedures. It is directed at the assessment of vehicle exhaust noise and is not intended to determine maximum vehicle sound levels.

This SAE Recommended Practice establishes the test procedure, environment, and instrumentation for determining the maximum exterior sound level of passenger cars, multipurpose vehicles, and light trucks having a gross vehicle mass (weight) rating of 4540 kg (10 000 lb) or less. This Recommended Practice is intended for use when the maximum sound generating capability of any applicable vehicle is to be measured. The test procedure is characterized by having fixed terminal conditions (attainment of rated engine speed at a fixed end point on the test site) in contrast to the procedure of SAE Standard J986 NOV81, Sound Level for Passenger Cars and Light Trucks, which has fixed initial conditions (specified initial vehicle speed at a fixed acceleration point on the test site). Full-throttle acceleration and closed-throttle deceleration of the vehicle are included in both procedures.