Refine Your Search

Search Results

Standard

Overhead Protection for Agricultural Tractors - Test Procedures and Performance Requirements

2020-02-20
CURRENT
J167_202002
This SAE Standard applies to an overhead cover installed on a protective frame or enclosure conforming to SAE J2194 or alternately SAE J1194 and the following additional requirement of a drop test to verify the effectiveness of the overhead cover in protecting the operator from falling objects. The test procedures and performance requirements outlined in this document are based on currently available engineering data.
Standard

Minimum Performance Criteria for Falling Object Guards for Excavators

2018-04-19
WIP
J1356
This SAE Recommended Practice applies only to excavators, as defined in SAE J/ISO 6165, working above ground, near an excavated or free standing bank or mine face which is higher than the top of the cab, or in demolition applications of free standing buildings or objects higher than the top of the cab. The evaluations are for resistance to penetration of guards to the point of infringement of the Deflection Limiting Volume (DLV, see SAE J397). The performance requirements of a representative specimen (that is, within the manufacturer's specifications), are based on the performance of proven structures under laboratory evaluation procedures. The areas protected include the top of the operator station (Top Guard), for protection from falling objects, and the front of the operator station (Front Guard), for protection from objects which approach the front of the cab.
Standard

Overhead Protection for Agricultural Tractors - Test Procedures and Performance Requirements

2017-01-06
HISTORICAL
J167_201701
This SAE Standard applies to an overhead cover installed on a protective frame or enclosure conforming to SAE J2194 or alternately SAE J1194 and the following additional requirement of a drop test to verify the effectiveness of the overhead cover in protecting the operator from falling objects. The test procedures and performance requirements outlined in this document are based on currently available engineering data.
Standard

Roll-Over Protective Structures (ROPS) for Wheeled Agricultural Tractors

2016-11-28
CURRENT
J2194_201611
Any ROPS meeting the performance requirement of ISO 5700 (Static ROPS Test Standard) or ISO 3463 (Dynamic ROPS Test Standard) meets the performance requirements of this SAE Standard if the ROPS temperature/material and seat belt requirements of this document are also met.
Standard

Steel Products for Rollover Protective Structures (ROPS) and Falling Object Protective Structures (FOPS)

2013-07-09
CURRENT
J1119_201307
The purpose of this SAE Information Report is to provide concepts for rational selection and application of materials for Rollover Protective Structures (ROPS) and Falling Object Protective Structures (FOPS) and to provide information about the properties that should be considered in selecting and utilizing material in protective structures. While other materials could conceivably be used successfully, this report is limited to a consideration of steel with discussion on its mechanical properties and processing characteristics. Emphasis is placed on the toughness aspect (ability to resist brittle fracture) as this property is of paramount importance to structure integrity. It is emphasized that specific values for material properties have relevance to performance only in conjunction with specific design considerations such as structure size or weld joint detail and location.
Standard

Minimum Performance Criteria for Falling Object Guards for Excavators

2013-03-28
CURRENT
J1356_201303
This SAE Recommended Practice applies only to excavators, as defined in SAE J/ISO 6165, working above ground, near an excavated or free standing bank or mine face which is higher than the top of the cab, or in demolition applications of free standing buildings or objects higher than the top of the cab.
Standard

Overhead Protection for Agricultural Tractors - Test Procedures and Performance Requirements

2011-04-01
HISTORICAL
J167_201104
This SAE Standard applies to an overhead cover installed on a protective frame or enclosure conforming to SAE J2194 or alternately SAE J1194 and the following additional requirement of a drop test to verify the effectiveness of the overhead cover in protecting the operator from falling objects. The test procedures and performance requirements outlined in this document are based on currently available engineering data.
Standard

Roll-Over Protective Structures (ROPS) for Wheeled Agricultural Tractors

2009-04-02
HISTORICAL
J2194_200904
Any ROPS meeting the performance requirement of ISO 5700 (Static ROPS Test Standard) or ISO 3463 (Dynamic ROPS Test Standard) meets the performance requirements of this SAE Standard if the ROPS temperature/material and seat belt requirements of this document are also met.
Standard

Steel Products for Rollover Protective Structures (ROPS) and Falling Object Protective Structures (FOPS)

2008-04-14
HISTORICAL
J1119_200804
The purpose of this SAE Information Report is to provide concepts for rational selection and application of materials for Rollover Protective Structures (ROPS) and Falling Object Protective Structures (FOPS) and to provide information about the properties that should be considered in selecting and utilizing material in protective structures. While other materials could conceivably be used successfully, this report is limited to a consideration of steel with discussion on its mechanical properties and processing characteristics. Emphasis is placed on the toughness aspect (ability to resist brittle fracture) as this property is of paramount importance to structure integrity. It is emphasized that specific values for material properties have relevance to performance only in conjunction with specific design considerations such as structure size or weld joint detail and location.
Standard

Performance Criteria for Rollover Protective Structures (ROPS) for Construction, Earthmoving, Forestry, and Mining Machines

2003-05-13
CURRENT
J1040_200305
This SAE Standard applies to the following off-road work machines of mass greater than 700 kg that are commonly used in earthmoving, construction, logging, and mining applications as identified in SAE J1116 JUN86 and designed for an-board, seated operator: a Crawler tractors and loaders (see SAE J1057 SEP88 Sections 3.1 and 7.1 and SAE J727 JAN86 for description and nomenclature). b Graders (see SAE J1057 SEP88 Section 6 and SAE J870 JUL84 for description and nomenclature). c Wheel loaders, wheel tractors, and their modifications used for rolling or compacting, dozer equipped wheel tractors, wheel log skidders, skid steer loaders, and backhoe loaders (see SAE J1057 SEP88 Sections 3.2, 7.2, and 9 for description and nomenclature). d Wheel industrial tractors (see SAE J1092 JUN86 for description and nomenclature). e Tractor portion of semi-mounted scrapers, water wagons, articulated steer dumpers, bottom dump wagons, side dump wagons, rear dump wagons, and towed fifth wheel attachments (see SAE J1057 SEP88 Sections 4.1.1.4, 4.1.2, 4.2.1.1, 4.3.1.2, 4.3.1.3, 4.3.2, and 5 and SAE J869 JUL90 and SAE J728 JUL90 for description and nomenclature). f Rollers and compactors (see SAE J1017 JAN86 for description and nomenclature). g Rigid frame dumpers with full mounted bodies (see SAE J1057 SEP88 Sections 4.1.1.1, 4.1.1.2, 4.1.1.3, 4.1.1.5, and 4.3.1.1 and SAE J1016 JUL90 for description and nomenclature).
Standard

Steel Products for Rollover Protective Structures (ROPS) and Falling Object Protective Structures (FOPS)

2002-09-20
HISTORICAL
J1119_200209
The purpose of this SAE Information Report is to provide concepts for rational selection and application of materials for Rollover Protective Structures (ROPS) and Falling Object Protective Structures (FOPS) and to provide information about the properties that should be considered in selecting and utilizing material in protective structures. While other materials could conceivably be used successfully, this report is limited to a consideration of steel with discussion on its mechanical properties and processing characteristics. Emphasis is placed on the toughness aspect (ability to resist brittle fracture) as this property is of paramount importance to structure integrity. It is emphasized that specific values for material properties have relevance to performance only in conjunction with specific design considerations such as structure size or weld joint detail and location.
Standard

Labeling of ROPS and FOPS and OPS

2000-02-08
CURRENT
J1164_200002
This SAE Standard establishes the specifications and content for labeling of ROPS, FOPS, and OPS, which may commonly be a part of construction, forestry, mining, and industrial machines. The label content herein shall be applied to a ROPS and/or FOPS and/or OPS on any of these machines.
Standard

Minimum Performance Criteria for Falling Object Protective Structure (Fops)

1999-03-01
CURRENT
J231_199903
This Recommended Practice applies only to machines covered by SAE J1040c (ROPS). The evaluations are for resistance to localized penetration. The performance requirements, of a representative specimen within the manufacturer's specifications, are based on the performance of experience proven structures under the laboratory evaluation procedure. It is intended that all portions of this Recommended Practice shall be reviewed and revised as additional knowledge of FOPS performance becomes available. This SAE Recommended Practice establishes a consistently repeatable laboratory evaluation procedure and performance requirements in that evaluation for structures intended to provide operators with reasonable protection from such falling objects as trees and rocks.
Standard

Performance Criteria for Falling Object Protective Structure (FOPS) for Industrial Machines

1999-03-01
CURRENT
J1043_199903
This standard applies to General Purpose Industrial Machines, as described in SAE J1116, which are equipped with Rollover Protective Structures (ROPS). This SAE Standard establishes performance criteria for Falling Object Protective Structures (FOPS) intended to provide operators of general purpose industrial machines with overhead protection from objects such as bricks, concrete blocks, and small hand tools that may fall from heights of not more than 9 m (30 ft) above the ground, encountered in operations such as highway maintenance, landscaping, and other services on construction sites where the falling object develops an energy not to exceed 1360 J (1000 ft-lbf).
Standard

Performance Criteria for Rollover Protective Structures (Rops) for Construction, Earthmoving, Forestry, and Mining Machines

1994-05-01
HISTORICAL
J1040_199405
This SAE Standard applies to the following off-road work machines of mass greater than 700 kg that are commonly used in earthmoving, construction, logging, and mining applications as identified in SAE J1116 JUN86 and designed for an-board, seated operator: a. Crawler tractors and loaders (see SAE J1057 SEP88 Sections 3.1 and 7.1 and SAE J727 JAN86 for description and nomenclature). b. Graders (see SAE J1057 SEP88 Section 6 and SAE J870 JUL84 for description and nomenclature). c. Wheel loaders, wheel tractors, and their modifications used for rolling or compacting, dozer equipped wheel tractors, wheel log skidders, skid steer loaders, and backhoe loaders (see SAE J1057 SEP88 Sections 3.2, 7.2, and 9 for description and nomenclature). d. Wheel industrial tractors (see SAE J1092 JUN86 for description and nomenclature). e.
Standard

Labeling of Rops and Fops and Ops

1991-01-01
HISTORICAL
J1164_199101
This SAE Standard establishes the specifications and content for labeling of ROPS, FOPS, and OPS, which may commonly be a part of construction, forestry, mining, and industrial machines. The label content herein shall be applied to a ROPS and/or FOPS and/or OPS on any of these machines.
X