Refine Your Search

Date

Date

Topic

Topic

Aerodynamics Education and training Tensile strength Textile and Flexible Plastics Committee Vehicles, Equipment, and Performance

Search Results

Viewing 1 to 20 of 39
12Next >Last >>
Sort by published
Standard

Test Method for Determining Blocking Resistance and Associated Characteristics of Automotive Trim Materials
2023-02-20
CURRENT
J912_202302
This test method is designed to indicate the degree of surface tackiness, color transfer, loss of embossment, and surface marring when two trim materials are placed face to face under specific conditions of time, temperature, and pressure. These specific conditions are not dictated in this test procedure but will be found in the material standards which govern each type of trim material to be tested.
Standard

Felts - Wool and Part Wool
2022-09-08
CURRENT
J314_202209
This SAE Standard identifies chemical/mechanical properties, thickness, width, mass, and other requirements recommended for felts (refer to Tables 1 and 2). It was developed with the cooperation of the Standardization Committee of the Felt Association, Inc., and in accordance with the ASTM tests indicated in the document. The commercial trade designations of the more commonly used grades of automotive felts are given along with complete specifications and tolerances for thickness, mass, wool content, chemical and physical requirements, color, and width. General information, recommended uses, etc., are published in Appendix A as a guide in the selection of felts for particular uses, but the requirements for each application should be taken into consideration in making final selections.
Standard

Standard Specification for Allowable Defects in Rolled Goods for Interior Trim
2022-01-28
CURRENT
J3064_202201
This specification is written for rolled goods used for trim sets for automotive seats. Face materials are fabric-woven or knitted textiles, and plastic goods like polyvinyl chloride (PVC), thermoplastic polyolefin (TPO), or thermoplastic polyurethane (TPU). This specification covers material rolled goods with and without foam or backing adhered to the face material.
Standard

Glossary of Fiberboard Terminology
2014-01-23
HISTORICAL
J947_201401
This information report presents the terminology and definitions as used in the fiberboard industry.
Standard

Test Method for Determining Blocking Resistance and Associated Characteristics of Automotive Trim Materials
2012-10-15
HISTORICAL
J912_201210
This test method is designed to indicate the degree of surface tackiness, color transfer, loss of embossment, and surface marring when two trim materials are placed face to face under specific conditions of time, temperature, and pressure. These specific conditions are not dictated in this test procedure but will be found in the material standards which govern each type of trim material to be tested.
Standard

Felts - Wool and Part Wool
2012-08-24
HISTORICAL
J314_201208
This SAE Standard identifies chemical/mechanical properties, thickness, width, mass, and other requirements recommended for felts (refer to Tables 1 and 2). It was developed with the cooperation of the Standardization Committee of the Felt Association, Inc., and in accordance with the ASTM tests indicated in the document. The commercial trade designations of the more commonly used grades of automotive felts are given along with complete specifications and tolerances for thickness, mass, wool content, chemical and physical requirements, color, and width. General information, recommended uses, etc., are published in Appendix A as a guide in the selection of felts for particular uses, but the requirements for each application should be taken into consideration in making final selections.
Standard

Glossary of Fiberboard Terminology
2009-04-20
HISTORICAL
J947_200904
This information report presents the terminology and definitions as used in the fiberboard industry.
Standard

Test Method for Determining Blocking Resistance and Associated Characteristics of Automotive Trim Materials
2007-11-02
HISTORICAL
J912_200711
This test method is designed to indicate the degree of surface tackiness, color transfer, loss of embossment, and surface marring when two trim materials are placed face to face under specific conditions of time, temperature, and pressure. These specific conditions are not dictated in this test procedure but will be found in the material standards which govern each type of trim material to be tested.
Standard

Felts—Wool and Part Wool
2007-09-10
HISTORICAL
J314_200709
This SAE Standard identifies chemical/mechanical properties, thickness, width, mass, and other requirements recommended for felts (refer to Tables 1 and 2). It was developed with the cooperation of the Standardization Committee of the Felt Association, Inc., and in accordance with the ASTM tests indicated in the document. The commercial trade designations of the more commonly used grades of automotive felts are given along with complete specifications and tolerances for thickness, mass, wool content, chemical and physical requirements, color, and width. General information, recommended uses, etc., are published in Appendix A as a guide in the selection of felts for particular uses, but the requirements for each application should be taken into consideration in making final selections.
Standard

Design Guidelines for Fiberboard Materials
2004-08-04
HISTORICAL
J1774_200408
This document provides information on the various fiberboard products, which are available for automotive application. It is intended to give engineers and designers a better understanding of product usage, characteristics, properties and industry terminology. The following sections cover these topics: 2. General Product Information 3. Design Characteristics 4. Physical/Mechanical Properties 5. Fiberboard Definitions In sections 2, 3 and 4 the fiberboard products are categorized. These sections give an overview of product types, with general information about characteristics and properties. In cases where product categories encompass more than one material or material grade, ranges were established to cover all of the products in that category. The individual companies that supply fiberboard products should be consulted for specific information about a particular product or application.
12Next >Last >>
X