Search Results

Particle emissions have been generally associated to diesel engines. However, spark-ignition direct injection (SI-DI) engines have been observed to produce notable amounts of particulate matter as well. The upcoming Euro 6 legislation for passenger cars (effective in 2014, stricter limit in 2017) will further limit the particulate emissions from SI engines by introducing a particle number emission (PN) limit, and it is not probable that the SI-DI engines are able to meet this limit without resorting to additional aftertreatment systems. In this study, the solid particle emissions of a SI-DI passenger car with and without an installed Particle Oxidation Catalyst (POC®) were studied over the New European Driving Cycle (NEDC) on a chassis dynamometer and over real transient acceleration situations on road. It was observed that a considerable portion of particle number emissions occurred during the transient acceleration phases of the cycle.

The emission regulations for mobile applications become stricter in Euro-IV to Euro-VI levels. Carbon monoxide and hydrocarbon can be removed by efficient Diesel Oxidation Catalysts (DOC) but Particulate Matter (PM) and NOx are more demanding requiring the use of active methods (urea-SCR and DPF) which will be world-wide implemented in the 2010's. Durable, coated V-SCR catalysts are based on stabilized raw materials and tailored preparation methods. Coated V2O5/TiO2-WO3 catalysts (ceramic 300/400 cpsi and metallic 500/600 cpsi) were evaluated by laboratory and engine bench experiments. Traditional V-SCR catalysts are durable up to about 600°C and have a high efficiency at 300°C-500°C. SCR activities were tailored to be higher also at 200°C-300°C or 500°C-600°C. The use of thermal stabilizers or the vanadium loading variation enabled the changes in operation window and stability.

This presentation will introduce the overall goals of the EcoCAR competition in brief, and will go into the third and final year of the competition in detail. The final year of competition saw teams refining and testing their student-built advanced technology vehicles including hybrids, plug-in hybrids, hydrogen fuel cell PHEVs and one battery electric. Important events, such as the Spring Workshop chassis dynamometer testing event at the U.S. Environmental Protection agency, as well as significant competition results, such as vehicle performance, consumer acceptability and efficiency will be presented. Presenter Patrick Walsh

The aim of this paper is to analyze the quantitative impact of fuel sulfur content on particulate oxidation catalyst (POC) functionality, focusing on soot emission reduction and the ability to regenerate. Studies were conducted on fuels containing three different levels of sulfur, covering the range of 6 to 340 parts per million, for a light-duty application. The data presented in this paper provide further insights into the specific issues associated with usage of a POC with fuels of higher sulfur content. A 48-hour loading phase was performed for each fuel, during which filter smoke number, temperature and back-pressure were all observed to vary depending on the fuel sulfur level. The Fuel Sulfur Content (FSC) affected also soot particle size distributions (particle number and size) so that with FSC 6 ppm the soot particle concentration was lower than with FSC 65 and 340, both upstream and downstream of the POC.

Legislations worldwide have started imposing stringent emission standards for particulate matter (PM) emitted by diesel engines. The main reason for these actions is the adverse effects on human health caused by particle emissions. Conventional ceramic Diesel Particulate Filters (DPF) have proven exceptionally effective in reducing particulate emissions with efficiencies of 90% or more. However, these filters require regular active regenerations as well as periodical ash removal in order to avoid a blockage of the exhaust line. These procedures are both costly and complex and as a result alternative aftertreatment solutions have been developed. One of these solutions is the Particle Oxidation Catalyst, POC-X. The main aim of the POC-X is not to equal the high efficiencies of the DPF, but to achieve the best possible particle reduction without creating the risk of blocking or the need for complex filter regeneration procedures.

Under on-road driving conditions, the engine load and speed and the cooling effect of ambient air may affect the functioning of exhaust aftertreatment devices. In this paper, we studied the effects of these parameters on the functioning of the combination of a Diesel Oxidation Catalyst and a Particle Oxidation Catalyst (DOC+POC). In the engine tests, the engine load and speed were observed to affect the nonvolatile particle reduction efficiency curve of the DOC+POC; while the nonvolatile core particle (Dp ≺ 15 nm) reduction was high (97-99%) in all the engine test modes, the reduction of soot varied from 57% at low load to 70% at high load. Because the change in engine load and speed affected both the exhaust temperature and flow velocity, the effects of these parameters were measured separately in an aerosol laboratory.

The use of biofuels in internal combustion engines changes the composition of the engine exhaust gas. When burning a biofuel blend, significant amounts of oxygenated hydrocarbons such as alcohols, ethers and aldehydes are present in the exhaust gas. It is known, that these compounds influence catalytic processes in exhaust gas converters. In this work we propose a global kinetic model for ethanol and acetaldehyde oxidation on commonly used Pt, PtPd and Pd-based catalytic oxidation converters of automobile exhaust gases. The mechanism is based on two steps: (i) partial oxidation of ethanol to acetaldehyde, and (ii) complete oxidation of acetaldehyde to CO₂ and H₂O. Kinetic parameters of ethanol and acetaldehyde reactions are evaluated on the basis of laboratory light-off experiments with several catalytic monolith samples (noble metal loading 9-140 g/cft; Pt, Pd, and PtPd; at space velocity 30 000-240 000 h-₁).