Refine Your Search

Search Results

Standard

Brake Effectiveness Marking for Brake Blocks - Truck and Bus

2019-06-06
CURRENT
J1801_201906
This SAE Recommended Practice provides the method to assign numerical values of brake effectiveness, using data from single station inertia dynamometer effectiveness tests, and to identify a uniform procedure to mark these values on the edge of brake blocks in excess of 12.7 mm (0.51 in) in thickness. The edge markings are intended to provide relevant and meaningful data on the normal and hot effectiveness of brake blocks, using the reference full size brake assembly, to aid in the characterization of these brake block frictional properties. This edge marking methodology is intended to permit accurate identification of the effectiveness values over the full wear life of the brake block. This is accomplished by means of permanent markings on one edge of the brake block.
Standard

Inertia Dynamometer Rotor Crack Test Procedure for Air Disc Brakes

2019-05-17
CURRENT
J3080_201905
This Recommended Practice applies to commercial vehicles equipped with air disc brakes and above 4536 kg of Gross Vehicle Weight Rating. Other assessments on the friction material or rotor related to wear, durability, correlation to product life, noise, judder, compliance to specific regulations, etc., are not part of this RP (Recommended Practice).
Standard

Service Brake Structural Integrity Requirements—Truck and Bus

2019-04-24
CURRENT
J1404_201904
This SAE Recommended Practice presents requirements for the structural integrity of the brake system of all new trucks, buses, and combinations of vehicles designed for roadway use and falling into the following classifications: a Truck and Bus—Over 4500 kg (10 000 lb) GVWR b Combination Vehicles—Towing vehicle over 4500 kg (10 000 lb) GVWR The requirements are based on data obtained from SAE J294.
Standard

Brake Drum Static Equivalency

2019-01-25
WIP
J3192
This Recommended Practice is intended for testing the static performance of a friction material and drum combination on an inertia dynamometer.
Standard

Inertia Dynamometer Rotor Crack Test Procedure for Air Disc Brakes

2018-03-23
HISTORICAL
J3080_201803
This Recommended Practice applies to commercial vehicles equipped with air disc brakes and above 4536 kg of Gross Vehicle Weight Rating. Other assessments on the friction material or rotor related to wear, durability, correlation to product life, noise, judder, compliance to specific regulations, etc., are not part of this RP (Recommended practice).
Standard

Brake Drum Qualification Recommended Practice

2017-10-30
CURRENT
J2686_201710
This SAE Recommended Practice is intended for qualification testing for brake drums used on highway commercial vehicles with air brakes using an inertia-dynamometer procedure. This Recommended Practice consists of two distinct tests: Part A - durability and speed maintenance test, and Part B - heat check drag sequence test. Each test can be considered to be an independent evaluation of the brake drum which tests different properties.
Standard

Service Brake Structural Integrity Test Procedure - Vehicles Over 4500 kg (10 000 lb) GVWR

2015-06-12
CURRENT
J294_201506
This SAE Recommended Practice establishes a method of testing the structural integrity of the brake system of all new trucks, buses, and combination vehicles designed for roadway use and falling in the following classifications: a Truck and Bus—Over 4500 kg (10 000 lb) GVWR b Combination vehicle—Towing vehicle over 4500 kg (10 000 lb) GVWR The test consists of two distinct tests: a Structural Endurance Test followed by a Structural Ultimate Strength Test. NOTE—These two tests originated from separate procedures, and were combined in this Recommended Practice. Each test can be considered to be an independent evaluation of the service brake’s structure. Based on time available, cost limitations, and the desired evaluation and historical data available, either of these tests could be considered as a complete evaluation of the brake’s structure.
Standard

Service Brake Structural Integrity Requirements—Truck and Bus

2014-11-15
HISTORICAL
J1404_201411
This SAE Recommended Practice presents requirements for the structural integrity of the brake system of all new trucks, buses, and combinations of vehicles designed for roadway use and falling into the following classifications: a Truck and Bus—Over 4500 kg (10 000 lb) GVWR b Combination Vehicles—Towing vehicle over 4500 kg (10 000 lb) GVWR The requirements are based on data obtained from SAE J294.
Standard

Brake Block Effectiveness Rating

2014-10-27
HISTORICAL
J1802_201410
This SAE Recommended Practice provides the test procedure and methods to calculate the effectiveness of brake blocks, using an inertia dynamometer. To minimize testing variability, and to optimize standardization and correlation, a single, high volume size of brake block is specified (FMSI No. 4515E) and evaluated in a reference S-cam brake assembly of 419 mm x 178 mm (16.5 in x 7.0 in) size, using a specified brake drum.
Standard

Brake Effectiveness Marking for Brake Blocks—Truck and Bus

2014-10-27
HISTORICAL
J1801_201410
This SAE Recommended Practice provides the method to assign numerical values of brake effectiveness, using data from single station inertia dynamometer effectiveness tests, and to identify a uniform procedure to mark these values on the edge of brake blocks in excess of 12.7 mm (0.51 in) in thickness.
Standard

Brake Drum Qualification Recommended Practice

2012-03-15
HISTORICAL
J2686_201203
This SAE Recommended Practice is intended for qualification testing for brake drums used on highway commercial vehicles with air brakes using an inertia-dynamometer procedure. This Recommended Practice consists of two distinct tests: Part A - durability and speed maintenance test, and Part B - heat check drag sequence test. Each test can be considered to be an independent evaluation of the brake drum which tests different properties.
Standard

Service Brake Structural Integrity Test Procedure-Vehicles Over 4500 kg (10 000 lb) GVWR

2011-05-19
HISTORICAL
J294_201105
This SAE Recommended Practice establishes a method of testing the structural integrity of the brake system of all new trucks, buses, and combination vehicles designed for roadway use and falling in the following classifications: a. Trucks and Bus— Over 4500 kg (10 000 lb) GVWR b. Combination of vehicle—Towing vehicle over 4500 kg 10 000 lb) GVWR The test consists of two parts: a Structural EnduranceTest followed by a Structural Ultimate Strength Test.
Standard

Brake Block Chamfer

2011-05-17
CURRENT
J662_201105
The scope of this SAE Standard is to provide a uniform chamfer on brake blocks.
Standard

Brake Power Rating Test Code--Commercial Vehicle Inertia Dynamometer

2008-08-21
CURRENT
J971_200808
The code provides test procedures and methods of calculating a brake rating from the data obtained for brakes used in highway commercial vehicles over 4.5 T (10 000 lbs) GVWR air and hydraulic. Some general correlation may be expected between brake ratings established by this means and those obtained from vehicle tests such as outlined in SAE J880. The brake rating power, kW (hp) calculated by conduct of this code is an arbitrary index of performance of the brake and drum when tested by this procedure and may be appreciably different from the values obtained by other techniques.
X