Search Results

Significantly, more fatalities and serious injuries occur due to ejection in roll over accidents. The present study was conducted to determine the occupant retention and head-neck injury potential aspects of laminated glass in roll over accidents. The head injury and neck parameters were obtained from Hybrid III 50% male dummy test device impacting on various types of side windows with laminated glass. Results indicated that the glass contained the dummy assembly and the head neck biomechanical parameters were below the critical value injury tolerance limits in simulated rollover accidents.

Phase I, Phase II, Caterpillar, Allis-Chalmers, Clark, Hyster, Toyota, and Entwistle fork lift upset studies have been conducted with Hybrid II dummies, Side Impact Dummies, and stunt men. The investigations concluded that the dummy lacks the ability to brace itself, hold on, and does not have adequate biofidelity to represent the human in a fork lift upset. Crushing injuries and death typically occur when the operator is thrown or jumps from the overturning forklift and is pinned by the overhead guard or canopy. The dummy studies demonstrated a wide range of Head Injury Criteria (HIC) values that were not reproducible. Furthermore, other injury producing variables such as angular acceleration, angular velocity or induced brain stress were not investigated. The injury level of 1000 for the HIC for the mid-sized male, small female, and 6 year-old has been recommended by the National Highway Transportation Safety Administration (NHTSA).

Determination of human tolerance to injury is difficult because of the physical differences between humans and animals, dummies and cadaver tissue. Certain human volunteer testing has been done but at subinjurious levels [STAP 86] [EWIN 72] Considerable biomechanical engineering injury studies exist for the adult human cadaver however little is available for the pediatric population [SANC 99] [KLEI 98b]. Studies have been made of pediatric skull bone modulus, fetal tendon and early pediatric studies of the newborn during delivery, however, a paucity of information still exists in these areas. A number of dummies have recently been made available principally for airbag testing to bridge the gap between the 50 percentile Hybrid III male dummy and the 95 percentile male dummy.

The objective of the study was to investigate the biomechanical response of the intact cranium. Unembalmed human cadavers were used in the study. The specimens were transected at the base of the skull leaving the intracranial contents intact; x-ray and computed tomography (CT) scans were obtained. They were fixed in a specially designed frame at the auditory meatus level and placed on the platform of an electrohydraulic testing device via a six-axis load cell. Following radiography, quasistatic loading to failure was applied to one of the following sites: frontal, vertex, parietal, temporal, or occipital. Retroreflective targets were placed in two mutually orthogonal planes to record the localized temporal kinematics. Applied load and piston displacement, and the output generalized force (and moment) histories were recorded using a modular digital data acquisition system. After the test, x-ray and CT images were obtained, and defleshing was done.

In the present investigation a tractor wheel runover accident was simulated to obtain biomechanical information relating to mechanism of injury. Twelve cadaver porcine specimens were runover with the right front wheel of a tractor. Specimens were placed on a six-axis force plate and thorax contours were recorded temporally. Results indicated up to 68% compression of the chest occurred during the runover event. The shear force in the direction of travel was a significant factor in the type of fractures that occurred to the rib cage. Pathology determined from x-ray revealed multiple fractures per rib in the area directly below the path of the tire. Autopsy evaluation revealed soft tissue contusion on the left side in the area of wheel path. There was often extra blood in the pericardial space and examination of the brain showed petechial hemorrhaging subdurally.

The objective of the present study was to determine the biomechanics of the human thorax in a simulated frontal impact. Fourteen unembalmed human cadavers were subjected to deceleration sled tests at velocities of nine or 13 m/s. Air bag - knee bolster, air bag - lap belt, and air bag - three-point belt restraint systems were used with the specimen positioned in the driver's seat. Two chest bands were used to derive the deformation patterns at the upper and lower thoracic levels. Lap and shoulder belt forces were recorded with seatbelt transducers. After the test, specimens were evaluated using palpation, radiography, and a detailed autopsy. Thoracic trauma was graded according to the Abbreviated Injury Scale based on autopsy findings. Peak thoracic deformations were normalized with respect to the initial chest depth to facilitate comparison between the specimens.

The objective of the study was to document the thoracic deformation contours in a simulated frontal impact. Unembalmed human cadavers and the Hybrid III anthropomorphic manikins were tested. Data from the newly developed External Peripheral Instrument for Deformation Measurement (EPIDM) was used to derive deformation patterns at upper and lower thoracic levels. Deceleration sled tests were conducted on three-point belt restrained surrogates positioned in the driver's seat (no steering assembly) using a horizontal impact test sled at velocities of approximately 14.0 m/s. Lap and shoulder belt forces were recorded with seat belt transducers. The experimental protocol included a Hybrid III manikin experiment followed by the human cadaver test. Both surrogates were studied under similar input and instrumentation conditions, and identical data acquisition and analysis procedures were used. All six testedcadavers demonstrated multiple bilateral rib fractures.

Engineering efforts directed at better occupant safety require a thorough understanding of available epidemiologic data. Epidemiologic studies using clinical as well as accident information facilitates the prioritization of biomechanics research so that controlled laboratory experimentation and/or analytical models can be advanced. This information has also value in dictating levels and types of injury that are critical to the development of anthropomorphic test devices used in crash environments. In this paper, motor vehicle accident related (excluding pedestrians, bicyclists, and motorcyclists) epidemiologic data were obtained from clinical and computerized accident (National Accident Sampling System-NASS) files. Clinical data were gathered from patients admitted to the Medical College of Wisconsin Affiliated Hospitals, and fatalities occurring in Milwaukee County, State of Wisconsin. NASS database with specific focus on spinal injuries of motor vehicle occupants was also used.