Search Results

At 70 miles per hour, overcoming aerodynamic drag represents about 65% of the total energy expenditure for a typical heavy truck vehicle. The goal of this US Department of Energy supported consortium is to establish a clear understanding of the drag producing flow phenomena. This is being accomplished through joint experiments and computations, leading to the intelligent design of drag reducing devices. This paper will describe our objective and approach, provide an overview of our efforts and accomplishments related to drag reduction devices, and offer a brief discussion of our future direction.

The results reported are from tests on July 6-8, 1999, on a limited-access 12km section of I -15 in San Diego. The tests involved 2, 3 and 4-car platoons operated and maintained by PATH personnel under the auspices of CALTRANS and utilized Buick LeSabre sedans under fully automatic longitudinal and lateral control. Multiple sensor data was acquired, including the fuel injector pulse width. We demonstrate that the fuel injector pulse width, in combination with engine RPM and forward speed, can be used to determine accurate estimates of instantaneous fuel consumption. The repeatability for total fuel consumed over a 2.4 km portion of the test path is ±1% based upon multiple single car runs over the three day period, with the major portion of the uncertainty arising from changing wind conditions. Fuel savings for individual vehicles vary from 0-10% depending upon number of vehicles, vehicle spacing, and vehicle position within the platoon.

This paper describes research and development for reducing the aerodynamic drag of heavy vehicles by demonstrating new approaches for the numerical simulation and analysis of aerodynamic flow. Experimental validation of new computational fluid dynamics methods are also an important part of this approach. Experiments on a model of an integrated tractor-trailer are underway at NASA Ames Research Center and the University of Southern California (USC). Companion computer simulations are being performed by Sandia National Laboratories (SNL), Lawrence Livermore National Laboratory (LLNL), and California Institute of Technology (Caltech) using state-of-the-art techniques.

This paper describes research and development for reducing the aerodynamic drag of heavy vehicles by demonstrating new approaches for the numerical simulation and analysis of aerodynamic flow. In addition, greater use of newly developed computational tools holds promise for reducing the number of prototype tests, for cutting manufacturing costs, and for reducing overall time to market. Experimental verification and validation of new computational fluid dynamics methods are also an important part of this approach. Experiments on a model of an integrated tractor-trailer are underway at NASA Ames Research Center and the University of Southern California. Companion computer simulations are being performed by Sandia National Laboratories, Lawrence Livermore National Laboratory, and California Institute of Technology using state-of- the-art techniques, with the intention of implementing more complex methods in the future.

The present study aims to document the drag reduction for a two-vehicle platoon by operating two full-scale Ford Windstar vans in tandem on a desert lakebed. Drag forces are measured with the aid of a special tow bar force measuring system designed and manufactured at USC. The testing procedure consists of a smooth acceleration, followed by a smooth deceleration of the platoon. Data collected during acceleration allows the calculation of the drag force on the trail-vehicle, while data collected during deceleration is used to calculate the drag on the lead vehicle. Results from the full-scale tests show that the drag behaviors for the two vans are in general agreement with the earlier conclusions drawn from the wind tunnel testsænamely, both vans experience substantial drag savings at spacings of a fraction of a car length.

Drag measurements are made on each of the members of 2, 3 & 4-vehicle platoons. One-eighth scale vehicle models are used in a wind tunnel equipped with a suction surface ground plane for boundary layer control. Strong interaction between vehicles takes place for spacings less than one vehicle length, leading to drag values substantially lower than for an isolated vehicle. All vehicles in the platoon experience lower drag. The average drag coefficient for a 4-vehicle platoon at a nominal spacing of 0.2 vehicle lengths is just 56 percent of the drag of the vehicle in isolation. It is also concluded that little additional benefit is achieved by forming platoons longer than 6-7 vehicles. Finally, the 2-vehicle platoons are operated in different orientations-front-to-front, back-to-back and reversed-to provide an estimate for drag reduction sensitivity to vehicle shape.