Refine Your Search

Topic

Author

Affiliation

Search Results

Technical Paper

Modeling and simulation analysis of electric vehicle thermal management system based on distributed parameter method

2022-03-29
2022-01-0211
In this paper, the distributed parameter method is used to establish the dynamic simulation model of the electric vehicle thermal management system and various parts, and the finite difference method is used to solve the calculation. A thermal management system model for electric vehicles is established by AMESIM to verify the accuracy of the model established in this paper. The model established in this paper is compared with the change trend of refrigerant temperature, pressure and flow rate at the outlet of each component of the system calculated based on the model established by AMESIM, which verifies the correctness of the model established in this paper. Using the established model, the influence of the refrigerant flow on the cooling performance of the battery pack and the influence on the heating comfort of the passenger compartment were studied, and a control strategy for the rapid cooling of the battery pack was proposed.
Technical Paper

1D-3D Coupled Analysis for Motor Thermal Management in an Electric Vehicle

2022-03-29
2022-01-0214
Motor thermal management of electric vehicles (EVs) is becoming more significant due to its close relations to vehicle aerodynamic performance and energy consumption, while computer aided engineering (CAE) plays an important role in its development. A 1D-3D coupled model is established to characterize transient thermal performance of the motor in an electric vehicle on a high performance computer (HPC) platform. The 1D motor thermal management model is integrated with the 1D powertrain model, and a 3D thermal model is established for the motor, while online data exchange is realized between the 1D and 3D models. The 1D model gives boundaries such as inlet coolant temperature, mass flowrate and motor heat generation to the 3D model, while 3D gives back boundaries such as heat transfer to coolant simultaneously. Transient simulations are performed for the 140kph(20℃) driving cycle, and the model is calibrated with experimental data.
Technical Paper

Development of Vehicle Thermal Management Model for Improving the Energy Efficiency of Electric Vehicle

2022-03-29
2022-01-0201
Recently, automobile manufacturers are interested in the development of battery electric vehicle (BEV) having a longer mileage to satisfy customer needs. The BEV with high efficiency depends on the temperature of the electric components. Hence it is important to study the effect of the cooling system in electric vehicle in order to optimize efficiency and performance. In this study, we present a 1-D vehicle thermal management (VTM) simulation model. The individual vehicle subsystems were modeled including cooling, power electric (PE), mechanical, and control components. Each component was integrated into a single VTM model and it would be used to calculate energy transfer among electrical, thermal, and mechanical energy. As a result, this simulation model predicts a plenty of information including the state of each component such as temperature, energy consumption, and operating point about electric vehicle depending on driving cycles and environmental conditions.
Technical Paper

A Novel Tensile Testing Method to Characterize the Weld Metal Properties for Laser Welded Blank (LWB) with AHSS

2022-03-29
2022-01-0243
The automotive industry applies Laser Welded Blanks (LWB) to increase the material utilization and light-weighting of the vehicle structure. This paper introduces a novel tensile testing method to characterize the hardening behavior of the weld material with a digital image correlation (DIC) and apply it as a constitutive hardening model in forming simulations with the LWBs of GEN3 steel. Formability tests under biaxial conditions were performed with LWB of GEN3 steel. Experimental results were correlated with finite element analysis (FEA) predictions that were conducted with and without the weld material model. The results show the weld material model for the LWB improves the accuracy of FEA predictions of both necking failures on the base metal as well as cracking on the weld.
Technical Paper

Comparing stress gradient and other concepts for fatigue analysis of notched components

2022-03-29
2022-01-0252
Nowadays simulation of the fatigue life is an essential part of the development of components in the automotive and machinery industry. Weak points can be identified fast and reliable with respect to stiffness, strength and lightweight. A pure virtual optimization of the design can be performed without the need of prototypes. Only for the production release a final test is necessary. A lot of parameters influence the fatigue life as the local stress, material, surface roughness, size of the component, temperature etc. Notches have the strongest impact on fatigue life, depending on radius and shape. Stresses at the notch base are increased because the load flow is forced through a reduced cross section, or changes its direction around an inwardly curved edge. But notches cause not only an increase of the local stress. Also, the local fatigue strength is increased because of a support effect from the neighboring areas, where the stress is already reduced.
Technical Paper

Research on Vehicle State Segmentation and Failure Prediction Based on Big Data

2022-03-29
2022-01-0223
Vehicle failure prediction technology is an important part of PHM(Prognostic and Health Management) technology, which is of great significance to the safety of vehicles and to improve driving safety. Based on the vehicle operating data collected by the on-board terminal (T-box) of the telematics system, the research on the state of vehicle failure is conducted. First, this paper conducts statistical analysis on vehicle historical fault data. Preprocessing procedures such as cleaning, integration, and protocol are performed to group the data set. Then, three indexes including recency(R) frequency(F), and days(D) are selected to construct a vehicle security status subdivision system, and K -Means algorithm is utilized to divide different vehicle categories from the perspective of vehicle value. Labeled information of vehicles in different security status are further established.
Technical Paper

A Perspective on Materials Selection for Body Structure Lightweighting in Battery Electric Vehicles

2022-03-29
2022-01-0233
The secular trend of automotive body structure light-weighting for internal combustion engine (ICE) vehicles is constrained by simultaneous and increasingly challenging vehicle cost, fuel economy and passenger safety standards. Mass optimization via materials selection in ICE vehicles, therefore, is ultimately dependent on the normalized cost of mass reduction solutions and the associated implications on passenger safety and vehicle performance metrics. These constraints have resulted in development and implementation of increasingly high specific-strength solutions for metallic components in the body structure and chassis. In contrast, mass optimization in battery electric vehicles is subject to alternative performance metrics to fuel efficiency, although considerations for vehicle safety and cost naturally remain directionally similar.
Technical Paper

Analysis on Irreversible Demagnetization Condition of Linear Oscillatory Actuator with Moving Magnets

2022-03-29
2022-01-0281
In this paper, a linear oscillatory actuator with moving magnets used in active engine mount is modeled and theoretically analyzed considering its performance decline at high temperature. Firstly, a finite element model of the linear oscillatory actuator with moving magnets is established. The actuator force is decomposed to ampere force and cogging force through formation mechanism analysis. By using the finite element model, ampere force and cogging force of the linear oscillatory actuator with moving magnets under different current loads and different mover positions are calculated. The finite element model and calculation method are validated by bench level test. The voice coil constant and cogging coefficient at room temperature are identified, which indicates the actuator force is a linear model related to the current and the mover position.
Technical Paper

The investigation of a contact and element-based approach for Cohesive zone modelling in the simulation of Delamination propagation

2022-03-29
2022-01-0259
The CAE industry always moves towards new ways to improve the productivity, efficiency and to reduce the solution times. Conventional method of Cohesive Zone Modelling has drawback of higher computation and modelling time. Due to this problem, sometimes Engineers need to avoid simulations and rely only on some sort of approximation of crack from previous designs. This approximation can lead to either product failure or overdesign of the product. A new approach is discussed in this paper to simulate crack initiation and propagation with Cohesive Zone Modelling. Conventional method uses Cohesive zone modelling with Hex or Penta elements by assigning material with cohesive properties, which increases computation and modelling time. The new approach models Cohesive zone as contact between two bodies, thus eliminating the need to use cohesive elements which will essentially reduce the computation time as well as modelling time.
Technical Paper

Fatigue life prediction method for natural rubber material based on Extreme Learning Machine

2022-03-29
2022-01-0258
Uniaxial fatigue tests of rubber dumbbell specimens under different mean and amplitude of strain are carried out. An Extreme Learning Machine (ELM) model optimized by Dragonfly Algorithm (DA) is proposed to predict the fatigue life of rubber based on measured rubber fatigue life data. Mean and amplitude of strain and measured rubber fatigue life are taken as input variables and output variables respectively in DA-ELM model. For comparison, genetic algorithm (GA) and particle swarm optimization (PSO) are used to optimize ELM parameters, and GA-ELM and PSO-ELM models are established. The comparison results show that DA-ELM model performs better in predicting the fatigue life of rubber with least dispersion. The coefficients of determination for the training set and test set are 99.47% and 99.12%, respectively. In addition, a life prediction model equivalent strain amplitude as damage parameter is introduced to further highlight the superiority of DA-ELM model.
Technical Paper

Technical Keynote: Durability Validation for Variable Vehicle Usage

2022-03-29
2022-01-0255
Durability engineering for vehicles is about relating real operational loading to the actual strength of the product and its components. In the first part of this presentation, we show how to calculate failure probabilities and safety factors based on the load and strength distributions. We discuss the uncertainty within the estimations, which is considerably large in case of extremely small failure probabilities as required for safety critical components. In the second part, we focus on modelling and simulating the loads based on real vehicle usage, such that the resulting statistics allows to understand and quantify the usage variability. The idea is, to simulate thousands of vehicle life spans of, say, 300.000 km or 15.000 h of operation each. The input data for such simulations typically consists of a combination of geographic data (like road network, topography, road conditions, traffic data, and points of interest) and properly segmented rich data from measurement campaigns.
Technical Paper

A fatigue life prediction method of rubber material for Automobile vibration isolator under road load spectrum

2022-03-29
2022-01-0253
Automobile rubber isolator was subjected to random load cycle for a long time in the service process, and its main rubber material for vibration isolation was prone to fatigue failure. Since the traditional Miner damage theory overlooked the load randomness, it had a prediction error problem. In order to improve the prediction accuracy of rubber fatigue life, the traditional Miner damage theory was modified by random uncertainty theory to predict the rubber fatigue life under random load. Firstly, the rubber dumbbell-shaped test column, which was vulcanized from rubber materials commonly used in vibration isolators, was taken as the research object. The uniaxial fatigue test of rubber under different strain amplitudes and strain mean values was carried out. Then the fatigue characteristic curve of rubber with equivalent strain amplitude as the damage parameter was established.
Technical Paper

Structure Optimization and Improvement of Commercial Vehicle Control Arm Based on Topology Optimization Method

2022-03-29
2022-01-0266
Automobile control arm is the guide and force transmission component of automobile suspension system, which makes the lightweight design of automobile according to a certain trajectory beneficial to energy saving and emission reduction. In this paper, the structure of the lower control arm of the front McPherson suspension is modeled and cleaned by UG software to simplify the model. The hexahedral shell element is used to establish the finite element model in HyperMesh. Considering the force and constraint conditions of the control arm under three different load conditions, the strength analysis is carried out by using the finite element software. It is found that the control arm is over-designed and has great potential for lightweight. The load and boundary conditions under different working conditions are set in HyperMesh, and the variable density method in topology optimization method is used to optimize the structure of automobile control arm under different working conditions.
Technical Paper

Simulating HVAC Noise in Vehicle Cabin with Material Absorption Modelling

2022-03-29
2022-01-0302
Design of HVAC system plays an important role in acoustic comfort for passengers. With automotive world moving towards electrical vehicles where powertrain noise is low, designing low noise HVAC system is becoming more important. For an automobile manufacturer, ability to predict the production vehicle cabin noise at the early design stage is important as it allows more freedom for design changes, which can be incorporated in the vehicle at lower cost. Although HVAC prototype and system level testing at early design stage is possible for noise estimation but flow field is not visible in test that makes difficult to improve design. CFD simulation can provide detailed information on flow field, noise source strength and location. But in such a simulation, accurate prediction has been a challenge due to the inability of CFD tools to model acoustic absorptive characteristics of interior walls of cabin.
Technical Paper

Numerical Investigation on the Internal Flow Field of Electronic Expansion Valve as the Throttle Element

2022-03-29
2022-01-0318
As one of the key components of the heat pump system, the electronic expansion valve mainly plays the role of throttling and reducing pressure in the heat pump system. The refrigerant flowing through the orifice will produce complex phase change. It is of great significance to study the internal flow field by means of CFD calculations. Firstly, a three-dimensional fluid model is established and the mesh is divided. Secondly, the phase change model is selected, the material is defined and the boundary conditions are determined. According to the principle of the fluid passing through thin-walled small holes, the flow characteristics of electronic expansion valve are theoretically analyzed. Then the flow characteristics of expansion valve are numerically calculated, and a bench for testing mass flow rate of the expansion valve is built. Then the theoretical value, CFD value and experimental value are compared to verify the correctness of the established three-dimensional fluid model.
Technical Paper

Development of FE modeling Procedures for Laser Welded Aluminum Structures in An Electric Vehicle Battery Module and Validation by Test Data

2022-03-29
2022-01-0317
High strength and thin materials are widely adopted in modern electric vehicles for lightweight design to achieve high energy efficiency. For battery modules, 5000 and 6000 aluminum are typically utilized as a structural material with a thickness range between 1 to 5 mm. Laser welding is one of the most optimum welding tools for joining such a thin material due to its unique advantages, e.g., high welding speed, high accuracy, high energy yet the smallest possible heat affect zone, etc. This paper aims to develop a simplified yet effective FE modeling procedure to simulate the laser welding effects on the aluminum structures used in electric vehicle battery modules. A sequentially-coupled thermo-mechanical analysis procedure is developed to determine the softened zone size for aluminum weldments. Then a tie-rupture weld model incorporates the softened zone to predict the weld failure strength.
Technical Paper

Parameter Analysis and Optimization of Road Noise Active Control System

2022-03-29
2022-01-0313
The parameter setting has a great influence on the noise reduction performance of the road noise active control (RNC) system. This paper analyzes and optimizes the parameters of the RNC system. Firstly, the model of the RNC system is established based on the FxLMS algorithm. Based on this model, taking the maximum noise reduction as the evaluation index, the sensitivity analysis of convergence coefficient, filter order, and reference signal gain was carried out using the Sobol method with the data measured by a real vehicle on asphalt pavement at 40km/h. The results show that there is no significant interaction between the three parameters. Then, using the idea of orthogonal experiment, the simulation results of the control model are analyzed by taking the maximum noise reduction as the evaluation index. It is found that the convergence coefficient has the greatest effect on the maximum noise reduction, followed by the filter order, and the reference signal gain has the least effect.
Technical Paper

Design and Optimization of an Electric Car Chassis and Body using Structural Analysis and CFD

2022-03-29
2022-01-0292
The transition from traditional gasoline-powered automobiles to electric vehicles (EVs) has taken time, two major challenges of engine- powered vehicles are greenhouse gas emissions and fuel economy. Electric cars require less maintenance. A lot of money can be saved while also helping the environment. In today's world, working with lightweight materials have emerged as a key area for improvement in the automotive industry. The most efficient method for increasing power output is to reduce the weight of vehicle components. Composite materials have benefited greatly from research and development because they are stronger, more recyclable, and easier to integrate into vehicles. The primary goal of this research is to design the body and chassis frame of a two-seater electric car.
Technical Paper

Hierarchical Vehicle Stability Control Strategy Based on Unscented Kalman Filter Estimation

2022-03-29
2022-01-0294
High-speed vehicle is prone to instability under bad road conditions, causing many safety accidents such as tail-flicking and overturning. Stability control could assist vehicle to drive safely and stably by adjusting the additional yaw moment. However, most of the existing stability control strategies directly invoke the information of the sideslip angle of the centroid that is difficult to obtain on the vehicle, and carry out complex controller design, which deviates from the actual application. In order to achieve a complete set of stability control architecture oriented to practical applications, this paper designs a hierarchical vehicle stability control strategy based on differential braking and state estimation technology.
Technical Paper

Numerical Assessment of Tribological Performance of Different Llow Viscosity Engine Oils in a 4-Stroke CI Light-Duty ICE

2022-03-29
2022-01-0321
Decreasing fuel consumption in Internal Combustion Engines (ICE) is a key target for engine developers in order to achieve the CO2 emissions limits during a standard cycle. In this context, reduction of engine friction can help meet those targets. The use of Low Viscosity Engine Oils (LVEOs), which is currently one of the avenues to achieve such reductions, is studied in this manuscript through a validated numerical simulation model that predicts the friction of the engine’s piston-cylinder unit, journal bearings and camshaft. These frictional power losses are obtained for four different lubricant formulations which differ in their viscosity grades and design. Results show a maximum friction savings of up to 6% depending on the engine operating condition, where the major reductions come from hydrodynamic-dominated components such as journal bearings, despite an increase in friction in boundary-dominated components such as the piston-ring assembly.
X