Refine Your Search

Topic

Author

Affiliation

Search Results

Research Report

Unsettled Topics Concerning Automated Driving Systems and the Transportation Ecosystem

2019-11-25
EPR2019005
Over the last 100 years, the automobile has become integrated in a fundamental way into the broader economy. A broad and deep ecosystem has emerged, and critical components of this ecosystem include insurance, after-market services, automobile retail sales, automobile lending, energy suppliers (e.g., gas stations), medical services, advertising, lawyers, banking, public planners, and law enforcement. These components – which together represent almost $2 trillion of the United State economy – are in equilibrium based on the current capabilities of automotive technology. However, the advent of autonomous vehicles (AVs) and technologies like electrification have the potential to significantly disrupt the automotive ecosystem. The critical cog governing the rate and pace of this shift is the management of the test and verification of AVs.
Technical Paper

Optimization of vehicle side panel to improve crashworthiness.

2019-11-21
2019-28-2573
The front of a car, though susceptible to the biggest impacts in terms of magnitude, has space and additional reinforcement to incorporate various safety measures. The rear has considerable amount of space to contain a proper crash box. The side of the car, though, doesn’t have this flexibility in design, the main limiting parameter being space. Any intrusion into the passenger cabin can result in serious injury or even death. The objective of this work is to improve the crashworthiness of a vehicle’s side so as to reduce intrusion into the passenger cabin. The work is focused on optimizing the door and B pillar. The optimized side panel is compared with the baseline model as per standard. ANSYS solver is used for the simulation. The optimized design applied to the door and B pillar will significantly improve crashworthiness of the vehicle side panel as a whole.
Technical Paper

Autonomous Car in India

2019-11-21
2019-28-2522
Automation is expanding in every possible direction and it was only time before it reached the Automobile sector. There has been tremendous traction towards autonomous cars since last 2-3 yrs as a probable solution to reduce accidents and promote safe and comfortable commute. Many companies have expressed their interest in developing some part(s) of it and when would all of this culminate resulting in a fully autonomous car. But as every coin has two aspects so same does automation. This paper covers the future of autonomous cars from Indian perspective, covering possible challenges, complex use cases, advantages, technology enablers, economy outlook etc. India has the dubious honor of ranking first in road deaths in the world at present & accounts for 10 percent of global road accidents with more than 1.46 lakh fatalities annually.
Technical Paper

Snowmobii 2.0 (Snow mobility Unmanned Vehicle)

2019-11-21
2019-28-2516
In this paper we propose the snow mobility vehicle in order increase the mobility and decrease the risk of accidents for carry food and medicines on snow bounded areas using unmanned tracked vehicle called as snowmobii 2.0. Our unmanned tracked vehicle can transport Food/medicines as well as Defence in snow bounded areas. This unmanned robot can run in loose as well as hard snow due to it have specific featured technology in base wheel(track wheel system) such as hub with outer seals that improve its durability. The proposed snow mobility vehicle is consist of many sophisticated-designed systems such as navigation system, obstacle detection system, communication system, temperature sensing system. Snowmobii 2.0 is easy to get command and enable significant reduction in losses of many solder’s precious lives due to unavailability of food and medicines at that place.
Technical Paper

Photo oxidation analysis method for automotive coating weathering performance evaluation

2019-11-21
2019-28-2555
RESEARCH OBJECTIVE Accelerated artificial weathering performance has been always observed as critical and most important factor for durability prediction of colour and resin for a coating system. Photo oxidation of resin is the phenomenon behind coating’s ageing. Though accelerated weathering tests protocols are widely used in industry, they are very costly and still very time consuming. One automotive grade accelerated testing can go as long as 8 months duration. METHODOLOGY (maximum 150 words) Photo oxidation value (POV) is proportionate to the degradation of the resin material used in coating. During the accelerated weathering POV is measured for the coating at stipulated interval during initial phase and trend is plotted for deterioration verses weathering test duration. POV can be analysed with the help of FTIR analysis to observe bond absorption energy and bond separation energy in the resin system. This trend can be extrapolated to predict the weathering performance of coating.
Technical Paper

Employing natural plant based fiber in interior automotive parts for cost & weight benefit

2019-11-21
2019-28-2559
The Automotive industry is in ever more need for a lesser weight car due to progressively stringent emission norms and the demand of customer to have better mileage. It can be a gargantuan challenge for automotive manufacturers to search for lesser weight material to meet both customers as well as regulatory norms. But in some cases such lower weight material can increase the cost and adding a expensive material which increases overall cost to a price sensitive market like India is not favorable. One such solution is using the indigenous plant fiber (Jute) in combination with propylene (PP) to make Interior plastics components. Jute a vegetable fiber also referred to as "the golden fiber" has high tensile strength, low extensibility and is well established in fabric, packing, agriculture, construction industries. The biodegradable Jute lesser weight & abundance (India is the leading manufacturer of the Jute) can be utilized in making automobile trim parts in India.
Technical Paper

Analysis of occupant dynamics and optimization of Driver airbag performance against all FMVSS208 frontal impact cases using validated Finite element Methodology

2019-11-21
2019-28-2545
Several people die every year due to vehicle accidents. Federal Motor Vehicle Safety Standards (FMVSS) are U.S. federal regulations stating design, structure, performance, and durability necessities for vehicles. The objective of a crash test for FMVSS No. 208 is to measure how well a passenger vehicle would protect its occupants in the event of a frontal crash. FMVSS 208 consists of series of tests including different impact surface type as well as occupant sizes. It also covers the belted and unbelted occupant behavior at the time of front impact. Each test scenario has different ways to injure the occupant. Airbags are the part of passive safety equipment family in any automobile and play an imperative role to reduce the occupant head and chest injuries at the time of crash or accidents. This study covers the evaluation of airbag performance in all FMVSS 208 load cases using validated Finite Element Methodology (FEM).
Technical Paper

Passenger "Sleeper Bus" Structure, an Optimization Study using Finite Element Analysis

2019-11-21
2019-28-2537
Sleeper buses are increasingly used as connectivity between cities and remote areas with sleeping comfort for passengers. During the normal operation, the bus body is subjected to several loads, external loads from the road (i.e. crossing over a speed bump, breaking & cornering). Moreover, there is a substantial possibility that these loads may lead to a structural failure. Hence, it is necessary to determine stresses occurred in the bus body to ensure its integrity under these driving scenarios. During the accident, rollover/front/rear/side impact, energy absorbing capacity of bus body structure is crucial for safety of passengers. The objective of this study is to reduce weight of bus structure while maintaining cost & safety as constraint. 3D Model prepared in NX and finite element model created in hypermesh ,LS-dyna/optistruct used as solver and post processing done in hyperview. In this study, fully loaded bus with passengers as well as maximum language mass, considered.
Technical Paper

Miniaturized and sleek protective device

2019-11-21
2019-28-2535
A miniaturized and sleek protective device M. Priyanka, Mahindra&Mahindra, India D. Boobala Krishnan*, Mahindra&Mahindra, India T.Vijayan, Mahindra& Mahindra, India Keywords-Fuse, Lightweight. Research and/or Engineering Questions/Objective: Now-a-days there is lot of advancement coming in automobiles. Earlier the electronics were used in engine and engine compartment areas. Now all hydraulics and transmission have been operated by electronics. The role of electronics like sensors, actuators increasing day by day for lifting and moving operations. With increase in electronics circuit, there is complex in wiring harness and packaging space for fuse box is premium Limitations: Limitations of placing other devices. Occupy more space and weight in the vehicle. Packing constraint due to vibration and thermal management issues. Methodology: Two different fuse of same rating can be given in one fuse and we can reduce the wire size.
Technical Paper

C123 Methodology for concept design of the Chassis Frame

2019-11-21
2019-28-2534
Objective This paper explores the usage of Altair simulation driven concept process, C123 for developing the chassis frame of the SUV along with Multidisciplinary optimisation tool. C123 process is useful for strategic & systematic usage of optimisation to generate design alternatives, trade-off information, best balanced designs, design sensitivities, to actively support the concept development process on daily basis. Methodology C123 is used for developing initial concept design of the chassis frame of the SUV. C123 process is independent of vehicle architectures, manufacture process (e.g. extrusions, sheet metal) & material selection (e.g. metals, composites, mixed etc.) and platform sharing strategy. C1 process is used for identification of optimum Structural Layout, C2 is for rapid optimum Sizing of idealized Sections, C3 is used for detailed optimum Sizing of Manufacturable Sections. Automatic process is used for handling pre and post processing process very efficiently.
Technical Paper

Study on effect of HVAC Air Flow Distribution on Windows Fogging

2019-11-21
2019-28-2414
Windshield & Windows fogging up in cars has long been a topic of interest & concern. Lot of research has already been put into Front/Rear windshield fogging up issue and, Defrosters, Heated Windshields have been designed to remove the fog effectively. However, Windows Fogging up is still one of the major concerns faced while driving, as it obscures the drivers' field of vision and raises safety concerns. Windows fogging up is a phenomenon in which Moisture is condensed on the glass of the window. It is classified into two categories - Inside Fogging and Outside Fogging. When Ambient temperature is lower than the cabin temperature, the moisture is condensed on the inside surface of the glass. In this case the moisture is added inside the cabin by the occupants when they exhale air. Similarly when the Cabin temperature is lower than the ambient temperature, the moisture from atmosphere is condensed on the outer surface of the glass.
Technical Paper

Determine Thermal Fatigue Requirements for PEPS Antenna Copper Wire over Vehicle Lifetime with defined Reliability Requirements.

2019-11-21
2019-28-2582
Reliability states the degree to which the result of a measurement, calculation, or specification can be depended on to be accurate. And, tests according to GMW specifications represents a minimum of 15 years of vehicle life time with defined Reliability and Confidence level. In this work, actual number of thermal cycles for Thermal Fatigue tests (Thermal Shock and Power Temperature Cycle) are calculated for Copper Wire whose Coffin Manson exponent is 5. Overstressing the PEPS Antenna under thermal fatigue requirement (defined number of thermal cycles based on Reliability and Confidence requirements) will lead to broken Copper wire which will result in component’s functional failure and thus impossible to continue reliability testing. The objective of this paper is to determine thermal fatigue requirements for Antenna’s Copper wire whose Coffin Manson exponent is 5.
Technical Paper

SEAT BELT DYNAMIC TEST PERFORMANCE SENSITIVITY ON SEAT BELT ANCHORAGE LOCATION

2019-11-21
2019-28-2398
Seat Belt Assemblies used in a vehicle are tested and certified as per IS 14140 for its performance during dynamic test. During validation test, seat belt anchorages are set-up as per design condition. The tolerance provided in the regulation for each anchorage is 50mm. Also there is difference in actual anchorage location in a vehicle and design location. This tolerance and variation can affect the performance of seat belt during the test or actual car accident. This study shows the variation of seat belt performance when different combination of anchorage locations is used within 50 mm.
Technical Paper

End-of-Life Vehicles in India – Regulatory Perspectives

2019-11-21
2019-28-2580
The unprecedented increment in vehicle sales in the last decade brought several challenges with it. Older vehicles, conforming to lenient emission norms continue to ply on road, continuously producing higher emissions. This not only burdens the environment with air pollution caused due to emissions, but also with land pollution caused due to landfills and the overall impact of utilising more resources excavated through nature to fulfil manufacturing requirements. Due to absence of regulations, older vehicles also compromise on active, passive and pedestrian safety measures. A need was felt to withdraw such vehicles from the roads but due to the lack of incentives for the last vehicle owner, unavailability of infrastructure or policy, though a guideline standard (AIS-129) was published, the idea, in its entirety never came to fruition. This paper discusses the areas affected during and beyond the recycling of the End-of-Life Vehicle (ELV).
Technical Paper

Location based emergency call enabler

2019-11-21
2019-28-2457
M. Priyanka, Mahindra & Mahindra, India Sai Himaja Nadimpalli , Mahindra & Mahindra, India Keywords-Safety, Connectivity, GPS Research and/or Engineering Questions/Objective: There are many times the driver or co-passenger can experience emergency conditions whenever the vehicle is running or it is in static. These kind of situations are tough to handle even if one is victimized . The victim can be rescued on time if proper information about the situation would reach his friends or family . Limitations: In existing system, if the accidental crash happens then signal from airbag unit will wake up the mobile, Once this wake up call happens,it will activate the gsm module. The emergency contacts stored in the mobile will be dialed up and the victim can convey his emergency situation through that. The driver will be rescued only if crash happens. There is no system to rescue the driver if heart attack happens when he is driving.
Technical Paper

Design of Additive Manufactured Thermoplastic Component as FMVSS 201U Countermeasure

2019-11-21
2019-28-2547
Research and/or Engineering Questing/Objectives: Safety of the occupant in passenger cars is one of the regulatory requirements in many developed countries. This includes upper interior head impact load case of the unbelted occupant during crash (FMVSS 201U) as one of them. During a crash event the occupant head can collide with the interior parts of the vehicle, such as a headliner, pillar trim and other subsequent components in the loading direction. Injury on the head is quantified in terms of the Head Injury Criterion of a crash test dummy (HIC(d)) value which should be less than 1000 per standard. Several ways can be adopted to reduce the HIC(d) value. These include a change in the design of ribs in the safety plastic components, headliner profile change, use of countermeasure foam between headliner and the exterior sheet metal parts, or a combination of any of these to absorb the energy of impact.
Technical Paper

SIMULATION OF SOFTENING AND RUPTURE IN MULTILAYERED FUEL TANK MATERIAL

2019-11-21
2019-28-2557
Research and/or Engineering Questions/Objective Plastic automotive fuel tanks made up of blow molded, multi-layered, high-density polyethylene (HDPE) material can take complex shapes with varying thickness. Accidental drop of fuel tank from a height during handling can lead to development of cracks. Damage can also occur due to an impact during a crash. This can be catastrophic due to flammability of the fuel. The objective of this work is to characterize and develop a failure model for the fuel tank material to simulate damage and enhance predictive capability of CAE for chassis and safety load cases. Methodology Different aspects were considered to develop a characterization and modelling strategy for the HDPE fuel tank. Material properties can be influenced by factors such as, service temperature, rate of deformation, state of stress etc.
Technical Paper

Proposed Model to Implement a Blockchain for Secure Vehicle to Vehicle Communication

2019-11-21
2019-28-2433
This paper proposes a model to implement a blockchain network that can host a system of autonomous vehicles which communicate through generic V2V protocols like DSRC and CV2X. The blockchain will be designed to function like a global database for V2V communication. The purpose behind the proposal of this model was to ensure a transparent and secure network between all autonomous vehicles which indirectly leads to reduced traffic congestion and takes us a step closer to zero crashes. This is made possible by the blockchain ledger’s enhanced encryption systems.
Technical Paper

Characterization and Durability of Mold-In-Color Engineering Plastics

2019-11-21
2019-28-2542
Plastics are prone to photo oxidative and thermal oxidative degradation under usage conditions due to their chemical nature. From sustainability and cost standpoint, there is an increasing focus on Mold-In-Color (MIC) plastic materials. Simultaneously customer’s expectations on the perceived quality of these MIC parts has been increasing with attractive color and glossy appearance. A study was conducted to analyze the product quality and durability aspects over a prolonged exposure to accelerated weathering condition. Material selected for this study were injection molded specimens of ABS and PC/ABS used in automotive passenger vehicles.
Technical Paper

Inspection and Maintenance of In-Use Motor Vehicles – Mitigating Environmental impact

2019-11-21
2019-28-2427
The existing rule no. 62 of CMVR, 1989 applies to various commercial vehicles and yet is unable to provide a promising template to have a concise format which will cover all the motor vehicles and their different components with more precise equipment plus virtual testing along with proper management of time during the bulk inspection of all the vehicles. This paper will include all the technicalities and the different course of actions which must be taken into account for the proper implementation of the desired regulations on the designated concern. The idea behind this paper is to have a compact procedural document for the periodical inspection and maintenance of all the motor vehicles running on the Indian Roads that adhere to the basic safety concerns of other on-road vehicles, the pedestrians and the surroundings.
X