Refine Your Search

Topic

Author

Affiliation

Search Results

Research Report

Unsettled Technology Domains in Aerospace Additive Manufacturing Concerning Safety, Airworthiness, and Certification

2019-12-20
EPR2019008
Additive manufacturing (AM) is currently being used to produce many certified aerospace components. However, significant advantages of AM are not exploited due to unresolved issues associated with process control, feedstock materials, surface finish, inspection, and cost. Components subject to fatigue must undergo surface finish improvements to enable inspection. This adds cost and limits the use of topology optimization. Continued development of process models is also required to enable optimization and understand the potential for defects in thin walled and slender sections. Costs are high for powder-fed processes due to material costs, machine costs, and low deposition rates. Cost for wire-fed processes are high due to the extensive post-process machining required. In addition, these processes are limited to low-complexity features.
Technical Paper

Neural Network Based Hybridized Dynamic Models for Connected Vehicles - A Case Study on Turbocharger Position Prediction

2019-11-21
2019-28-2443
Combustion engine driven vehicles operating in a connected and autonomous vehicle (CAVs) environment, the engine drive cycles are run in a regulated manner. This is due to synchronized movement of vehicles operating in connected environment. Hence, developing intelligent and faster control of airpath variable with smooth transient tracking, helps to achieve a synchronized drive cycle. With regards to this author discuss modeling of turbocharger. This is critical for airpath system variable calculation. Due to the hybridized nature of turbocharger models, predicting accurately the position of VTG without introduction of any sensing devices is key, as sensing device induces delay in action. Authors propose a model which improve the performance and capability of VTG position prediction. A neural network based supervised learning model is developed. This model is coupled with engine models which are in series application for performance evaluation.
Technical Paper

Optimization of Compression Ratio for DI Diesel Engines for Better Fuel Economy

2019-11-21
2019-28-2431
Fuel economy is becoming one of the key parameter as it does not only account for the profitability of commercial vehicle owner but also has impact on environment. Fuel economy gets affected from several parameters of engine such as Peak firing pressure, reduction in parasitic losses, volumetric efficiency and thermal efficiency. Compression ratio is one of key design criteria which affects most of the above mentioned parameters, which not only improve fuel efficiency but also results in improvement of emission levels. This paper evaluates the optimization of Compression ratio and study its effect on Engine performance. The parameters investigated in this paper include combustion bowl volume in Piston and Cylinder head gasket thickness as these are major contributing factors affecting clearance volume and in turn the compression ratio of engine. Based on the calculation results, an optimum Compression Ratio for the engine is selected.
Technical Paper

V2X Standardization in Over-the-Air Solution

2019-11-21
2019-28-2435
Today in-vehicle software is growing significantly resulting into increase in importance of over-the-air software/firmware updates dramatically. Various suppliers are providing the update-over-the-air solution in the automotive sector. Due to limited standardization in solution, each supplier needs more customization for specific customer. This paper is to bring in the required standardization in V2X resulting into ‘vehicle on-board components’ as one solution to multiple customer. “Update over-the-air improved solution through various standardization resulting into ‘vehicle on-board components’ as the product”
Technical Paper

Estimating Drive Cycle for E-Rickshaws Using Real World Operating Scenarios for Overall Powertrain Improvements

2019-11-21
2019-28-2497
E-Rickshaws are popular and convenient mode of transportation for last mile connectivity and are typically used for short distance (<10 Km) commute. As per recent reports there are more than 1.5 million e-rickshaws plying on Indian roads and approx. 10,000 vehicles are adding every month. Owners of these vehicles are inclined towards the overall range these vehicles can give on a single charge. Range can be improved by using efficient powertrain. Range can also be improved by optimized Battery Management systems and Controllers. Though there are certain evaluation criteria (such as curtailed Indian Drive Cycles) which can be used for efficiency estimations, manufacturers are more interested in extending the range in real world scenarios. Hence, the availability of real-world drive cycle is imperative. Through this paper, we have attempted to derive a typical drive cycle by collecting road data of various types of e-Rickshaws under different environment conditions.
Technical Paper

Potential for Emission Reduction and Fuel Economy with Micro & Mild HEV

2019-11-21
2019-28-2504
The development of modern combustion engines (spark ignition as well as compression ignition) for vehicles compliant with future oriented emission legislation (BS6, Euro VI, China 6) has introduced several technologies for improvement of both fuel efficiency as well as low emissions combustion strategies. Some of these technologies as there are high pressure multiple injection systems or sophisticated exhaust gas after treatment system imply substantial increase in test and calibration time as well as equipment cost. With the introduction of 48V systems for hybridization a cost- efficient enhancement and, partially, an even attractive alternative is now available. An overview will be given on current technologies as well as on implemented test procedures. The focus will be on solutions which have potential for the Indian market, i.e. solutions which can be implemented with moderate application effort for currently available compact and medium size cars.
Technical Paper

Design and Development of Constant Speed Diesel Engine up to 20 bar BMEP with Inline FIE

2019-11-21
2019-28-2549
Development trend in diesel engine is to achieve more power from same size of engine. With increase in brake mean effective pressure (BMEP), the peak firing pressure will also increase. The methodology to control the peak firing pressure on higher BMEP is the major challenge. We achieved better SFC with CPCB II emission targets on a constant speed engine. This study involves a systematic approach to optimize combustion parameters with a cost effective and robust Inline Fuel Injection System. This paper deals with the strategies applied and experimental results for achieving the power density of 25kW/lit @ 1500 rpm with Inline FIP by keeping lower Peak firing pressure. Various combustion parameters such as Combustion Bowl Geometry, selection of Turbocharger, Swirl, FIP, Nozzle configuration, EGR flow rate, EGR operation strategy, optimizing injection pressures, start of injection, end of injection, injection duration are optimized.
Technical Paper

Computerized Experimental Investigation on Performance & Exhaust Emission of Twin Cylinder Adiabatic Diesel Engine Coated with YSZ

2019-11-21
2019-28-2548
The fuel consumption and performance of the Internal Combustion (IC) engine is improved by adopting concepts of an adiabatic engine. An experimental investigation for different load conditions is carried out on a water-cooled, constant-speed, twin-cylinder diesel engine. This research is intended to emphasize energy balance and emission characteristic for standard uncoated base engine and adiabatic engine. The inner walls of diesel engine combustion chamber are thermally insulated by a top coat of Metco 204NS yttria-stabilized zirconia (Y2O3ZrO2) powder (YSZ) of a thickness of 350 mm using plasma spray coating technology. The same combustion chamber is also coated with thermal barrier coating (TBC) bond coats of AMDRY 962 Nickle chromium aluminum yttria of thickness of 150 mm. The NiCrAlY powder specially designed to produce coating’s resistance to hot corrosion.
Technical Paper

Characterization and Durability of Mold-In-Color Engineering Plastics

2019-11-21
2019-28-2542
Plastics are prone to photo oxidative and thermal oxidative degradation under usage conditions due to their chemical nature. From sustainability and cost standpoint, there is an increasing focus on Mold-In-Color (MIC) plastic materials. Simultaneously customer’s expectations on the perceived quality of these MIC parts has been increasing with attractive color and glossy appearance. A study was conducted to analyze the product quality and durability aspects over a prolonged exposure to accelerated weathering condition. Material selected for this study were injection molded specimens of ABS and PC-ABS used in automotive passenger vehicles. Comparative analysis was conducted before and after weathering exposure at defined intervals by using Fourier Transform infra-red spectrometer (FTIR), differential scanning colorimetry (DSC), universal testing machine (UTM), Izod impact tester and microscope to understand the impact on their chemical and mechanical properties.
Technical Paper

Heat Shield Insulation for Thermal Challenges in Automotive Exhaust System

2019-11-21
2019-28-2539
While advanced automotive system assemblies contribute greater value to automobile safety, reliability, emission/noise performance and comfort, they are also generating higher temperatures that can reduce the functionality and reliability of the system over time. Thermal management and proper insulation are extremely important and highly demanding for the functioning of BSVI and RDE vehicles. Frugal engineering is mandatory to develop heat shield in the exhaust system with minimum heat loss. Heat shield design parameters such as insulation material type, insulation material composition, insulation thickness, insulation density, air gap thickness and outer layer material are studied for their influences on skin temperature using mathematical calculation, CFD simulation and measurement. Simulation results are comparable to that of the test results within 10% deviation.
Technical Paper

High Durable PU Metallic Monocoat System for Tractor Sheet Metal Application

2019-11-21
2019-28-2541
In sheet metal painting for various applications like tractor and automobiles, most attractive coating is metallic paints. It is widely applied using 3 coat 2 bake or 3 coat 1 bake technology. Both options, results in high energy consumption, higher production through put time and lower productivity in manufacturing process. During various brainstorming and sustainability initiatives, paint application process was identified to reduce burden on environment and save energy. Various other industry benchmarking and field performance requirement studies helped to identify critical quality parameters. There was collaboration with supplier to develop monocoat system without compromising any performance and aesthetic properties. This resulted in achieving better productivity, elimination of two paint layers, substantial reduction in volatile organic content, elimination of one baking cycle and energy saving.
Technical Paper

Next Generation Power Distribution Unit in Wiring Harness

2019-11-21
2019-28-2571
With the exponential advancement in technological features of automobile’s EE architecture, designing of power distribution unit becomes complex and challenging. Due to the increase in the number of features, the overall weight of power distribution unit increases and thereby affecting the overall system cost and fuel economy. The scope of this document is to scale down the weight and space of the power distribution unit without compromising with the current performance. The concept of next generation power distribution unit in automobiles is achieved using miniaturization of its sub-components which involves replacing the mini fuses and JCASE fuses with LP mini and LP JCASE fuses respectively. The transition doesn’t involve any tooling modification and hence saves the tooling cost. Furthermore, to address stringent weight and space targets, LP mini fuses and LP JCASE fuses were further replaced with micro-2 fuse and M-case fuse respectively.
Technical Paper

Mitigation for Edge Corrosion Protection for Automotive Bodies

2019-11-21
2019-28-2561
A major challenge to automotive industry is to protect the vehicle from corrosion in varying environments with respect to different service conditions. One of the main types of corrosion that affects aesthetic look is edge corrosion on sheet metal. Mostly edge is acting as starting point of corrosion due to unprotected metal exposed to environment. Special attention needs to be given to exposed edges to protect from rust formation. Samples were prepared as per design of experiments with respect to manufacturing process condition, material usage, and design. These samples were tested for corrosion test and painting process compatibility. In this study effect and limitation of burr and optimum solution with respect to corrosion was evaluated and results will be discussed.
Technical Paper

Combustion Optimization and In-Cylinder NOx and PM Reduction by Using EGR and Split Injection Techniques

2019-11-21
2019-28-2560
Nowadays, the major most challenge in the diesel engine is the oxides of nitrogen (NOx) and particulate matter (PM) trade-off, with minimal reduction in Power and BSFC. Modern day engines also rely on expensive after-treatment devices, which may decrease the performance and increase the BSFC. In this paper, combustion optimization and in-cylinder emission control by introducing the Split injection technique along with EGR is carried out by 1-D (GT- POWER) simulation. Experiments were conducted on a 3.5 kW Single-cylinder naturally aspirated CRDI engine at the different load conditions. The Simulation model incorporates detailed pressure (Burn rate) analysis for different cases and various aspects of ignition delay, premixed and mixing controlled combustion rate, the injection rate affecting oxides of nitrogen and particulate matter.
Technical Paper

Simulation of Softening and Rupture in Multilayered Fuel Tank Material

2019-11-21
2019-28-2557
Multi-layered, high-density polyethylene (HDPE) fuel tanks are increasingly being used in automobiles due to advantages such as shape flexibility, low weight and corrosion resistance. Though, HDPE fuel tanks are perceived to be safer as compared to metallic tanks, the material properties are influenced by service temperature. At higher temperatures (more than 80oC), plastic fuel tanks can soften, sag and eventually spill out the fuel, while the extreme cold (less than -20°C) can lead to potential cracking problems. Damage may also occur due to accidental drop while handling or due to an impact from a flying shrapnel. This can be catastrophic due to flammability of the fuel. The objective of this work is to characterize and develop a failure model for the plastic fuel tank material to simulate damage and enhance predictive capability of CAE for chassis and safety load cases.
Technical Paper

High Rigidity and Light Weight Bumper Material Development in India

2019-11-21
2019-28-2553
Vehicle weight reduction becomes important at the view point of fuel efficiency improvement and CO2 reduction in India also as well as developed countries. With this background, High tensile and Super high tensile steel application has become increasing. Similarly, weight reduction of big plastic parts like bumper face is one of the most important items, so Honda has developed Thin-wall and light weight bumper face. In the development of light weight bumper, rigidity, impact strength and flowability which are main requirement are contradictory property. It is necessary to develop new material to achieve this technical concern. Moreover, we verified part shape and thickness optimization to achieve part requirement. Established high property material and part manufacturing technology were applied for current CITY firstly, and it has been expanded to other models sequentially to contribute weight reduction for Honda vehicles.
Technical Paper

Determine Thermal Fatigue Requirements for PEPS Antenna Copper Wire over Vehicle Lifetime with Defined Reliability Requirements

2019-11-21
2019-28-2582
Reliability states the degree to which the result of a measurement, calculation, or specification can be depended on to be accurate. And, tests according to GM specifications represents a minimum of 15 years of vehicle life time with defined Reliability and Confidence level. In this work, actual number of thermal cycles for Thermal Fatigue tests (Thermal Shock and Power Temperature Cycle) are calculated for Copper Wire whose Coffin Manson exponent is 5. Overstressing the PEPS Antenna under thermal fatigue requirement (defined number of thermal cycles based on Reliability and Confidence requirements) will lead to broken Copper wire which will result in component’s functional failure and thus impossible to continue reliability testing. The objective of this paper is to determine thermal fatigue requirements for Antenna’s Copper wire whose Coffin Manson exponent is 5.
Technical Paper

Development of Low Cost Closed Crankcase Ventilation With Oil Mist Separation System on Light Duty Diesel Engine

2019-11-21
2019-28-2578
Currently automotive industry is facing bi-fold challenge of reduction in greenhouse gases emissions as well as low operating cost. On one hand Emission regulations are getting more and more stringent on other hand there is major focus on customer value proposition. In engine emission the blow by gases are one of the source of greenhouse gases from engine. Blow-by gases not only consist of unburnt hydrocarbons but also carry large amount of oil. If oil is not separated from these gases, it will led to major oil consumption and hence increase total operating cost of Vehicle. Considering the above challenges, effort taken to develop a low-cost closed crankcase ventilation with oil mist separation system on diesel engine. For cost-effective solution, two different design and configuration of oil mist separation system developed.
Technical Paper

End-of-Life Vehicles in India-Regulatory Perspectives

2019-11-21
2019-28-2580
This paper discusses the areas affected during and beyond the recycling of the End-of-Life Vehicle (ELV). While the scrap of the vehicle shall be crushed and re-utilised from scrap metal (ferrous and non-ferrous), this paper also discusses potential usage of the components for remanufacturing by the respective OEMs. It further discusses how non-metallic parts such as plastics may be recycled. A complete framework committed to such a comprehensive approach shall not only reduce the impact on the environment but will also provide a more affordable and responsible alternative to the industry. While doing that, the economic and environmental impact on the industry and the un-organised sector has to be considered whilst also ensuring that a model with shared responsibility is established to dispose/ recycle any such ELV responsibly.
Technical Paper

A New Appraisal of the Thermomechanical Behaviour of a Hybrid Composite Brake Disc in a Formula Vehicle

2019-11-21
2019-28-2572
The present work promotes a hybrid composite brake disc for thermal and structural analysis of a formula vehicle. In order to reduce the un-sprung weight without compromising the strength, hybrid composite materials were incorporated in the disc plates of the braking system. In the disk brake system, the disc is a major part of a device used for slowing or stopping the rotation of a wheel. Repetitive braking of the vehicle leads to heat generation during each braking condition. Based on the practical understanding the brake disc was remodeled with unique slotting patterns and grooves, using the selected aluminium alloy of (AA8081) with reinforcement particle of 15wt% Silicon carbide (SiC) and 3wt% Graphite (Gr) as a hybrid composite material for this proposed work. By varying slotting pattern and groove angles the transient thermal and structural analysis using ANSYS workbench on the hybrid composite disc plate of disk brake is done.
X