Refine Your Search

Search Results

Training / Education

Applications of GD&T 2-Day

2021-10-12
This course teaches the thought processes involved in assigning GD&T to components and will change the way many engineers think about part tolerancing. Utilizing the expertise of world-renowned GD&T expert Alex Krulikowski, the course focuses on what constitutes good and poor drawing practices, common dimensioning methods used in industry, using GD&T to communicate system functions on component dimensions, and the logic of how to apply GD&T to components.
Training / Education

Advanced Concepts of GD&T (2009) 2-day

2021-04-20
This course teaches the advanced concepts of GD&T as prescribed in the ASME Y14.5-2009 Standard and offers an in-depth explanation of advanced GD&T topics not covered in our Fundamentals training. Complex topics include expanded use of composite position and profile tolerances, customized datum reference frames, the translation modifier, and applying GD&T to non-rigid parts. Learning is enforced interactive engagement between the instructor and the students, followed with numerous exercises at the end of each chapter.
Training / Education

Fundamentals of GD&T 2018 3-day

2021-02-09
This course teaches the terms, rules, symbols, and concepts of GD&T as prescribed in the ASME Y14.5-2018 Standard. This course offers an in-depth explanation of geometric tolerancing symbols, their tolerance zones, applicable modifiers, common applications, and verification principles. The class includes a comparison of GD&T to the directly toleranced dimensioning method; Rules #1 and #2; form and orientation controls; tolerance of position; runout and profile controls. Newly acquired learning is reinforced throughout the class with more than 150 practice problems.
Training / Education

Engineering Project Management

2020-12-01
Project Management and Advanced Product Quality Planning (APQP) are two critical techniques used in product development in the mobility industry today. This seminar will bring these techniques together in an easy to understand format that goes beyond the typical concept of constructing timelines and project planning, by exploring not only the Automotive APQP process, but also key aspects of PM processes. Students will gain a solid foundation in the principles and application of Project Management and APQP.
Training / Education

Fundamentals of GD&T 2009 3-day

2020-10-28
This course teaches the terms, rules, symbols, and concepts of GD&T as prescribed in the ASME Y14.5-2009 Standard. Utilizing the expertise of world-renowned GD&T expert Alex Krulikowski, this course offers an in-depth explanation of geometric tolerancing symbols, their tolerance zones, applicable modifiers, common applications, and limitations. The class includes a comparison of GD&T to coordinate tolerancing; Rules #1 and #2; form and orientation controls; tolerance of position; runout and profile controls. It is up to date with the new 2009 standard and explains all the new rules and symbols.
Training / Education

Critical Concepts of Tolerance Stacks 2009 3-day

2020-10-20
This course, based on the ASME Y14.5-2009 standard, provides an in-depth explanation of how to use tolerance stacks to analyze product designs and how to use geometric tolerances in stacks. You will learn the essential methods and concepts used for creating 1D part and assembly tolerance stacks.
Training / Education

Model-Based Systems Engineering (MBSE)

2020-10-16
As the complexity of products increases, traditional text-based systems engineering can no longer meet the needs. To solve the problem, Model-based Systems Engineering offers a unified communication platform among relevant staff by carrying out diagram-based unambiguous description, analysis and design for the demand, structure and behavior of complex systems in the form of a model. It, however, still remains a challenge to implement MBSE modeling and model-driven technology and application as well as its integration with the industry.
Training / Education

Quality Function Deployment Transforming Voice of the Customer into Engineering Specifications

2020-10-15
Currently in the industry, especially within China, product requirement development is more of an experienced-based process rather than a scientific methodology. This course addresses this issue and provides a more process-driven method for better requirement development through the Quality Function Deployment (PFD) methodology. Real industrial examples are used to demonstrate how to systematically convert voice of the customer data to engineering specifications using QFD.
Training / Education

Metallurgy All-Access Bundle

2020-04-08
Anytime
For products made of metal, many problems occur because people overlook metallurgy when making design, manufacturing, and supplier decisions and when working on quality problems. Created for design, quality, and manufacturing engineers, the 11 metallurgy courses in this bundle teach practical metallurgy concepts and how to apply them to real-world problems and decisions. Online Courses Principles of Metallurgy Learn the metallurgical fundamentals of how alloying, heat treatment, and cold working are used to modify metal strength.
Training / Education

FEA Beyond Basics: Nonlinear Analysis Web Seminar RePlay

Anytime
Finite Element Analysis (FEA) has been an indispensable tool for design simulation for several decades but this wide spread use has been limited to simple types of analyses. Relatively recently, more advanced analyses have given easy-to-use interfaces enabling design engineers to simulate problems formerly reserved for analysts. FEA Beyond Basics targets the FEA users who wish to explore those advanced analysis capabilities. It will demonstrate how to move past the ubiquitous linear structural analysis and solve structural nonlinear problems characterized by nonlinear material, large displacements, buckling or nonlinear connectors.
Training / Education

Fundamentals of Fatigue Analysis

Fatigue is a structural failure mode that must be recognized and understood to develop products that meet life cycle durability requirements. In the age of lightweighting, fatigue strength is an important vehicle design requirement as engineers struggle to meet stringent weight constraints without adversely impacting durability. This technical concept course introduces the fatigue failure mode and analysis methods. It explains the physics of material fatigue, including damage accumulation that may progress to product failure over time, and it provides the needed foundation to develop effective fatigue prediction capabilities.
Training / Education

ISO 14001:2015 Lead Auditor Training

Anytime
ISO 14001:2015 is an environmental management standard (EMS) developed by the International Organization for Standardization (ISO). It’s a generic standard that can be used for any organization that provides physical products or services. ISO 14001 is the most widely used EMS because it’s both business and management oriented. However, the requirements must be carefully interpreted to make sense within a particular organization. For example, the environmental impact of developing automotive products is not the same as producing food products or offering consulting services, yet this standard can be applied to any of these activities.
Training / Education

Introduction to the Secure Microkernel, seL4

Security continues to be an ever-growing concern in more and more design spaces. There are daily articles about security breaches and there is a need for much higher security through the entire system stack. Thorough testing of systems can lead to stronger security in systems, but testing can only expose so many vulnerabilities. Formal methods is another solution that ensures specific behaviors will not occur. seL4 is the first formally proven microkernel and it is open-source. This makes it a great solution for systems that need strong security.
Training / Education

Global 8D

Anytime
Global 8D (G8D) is a disciplined process developed by Ford Motor Company to help product development and manufacturing engineers identify and solve problems. Solving problems results in efficient, as well as effective, resolution to "root causes" of customer satisfaction issues, and helps reduce warranty costs. With this two-hour online course, you will learn the methods and tools used to complete each step in the Ford Global 8D find-and-fix problem-solving process, including steps to define the problem, verify the root cause and escape point, and prevent occurrence.
Training / Education

ISO Geometrical Tolerancing 3-day

This course builds on basic engineering drawing concepts and teaches use of International Standards Organization (ISO) standards. Utilizing the expertise of world-renowned GD&T expert Alex Krulikowski, this course will teach you to recognize what is required on a standard-compliant drawing and recognize geometrical tolerances based on the ISO standards. The course combines information from dozens of ISO standards into a logical understandable topic. Newly acquired learning is reinforced throughout the class with more than 150 practice problems.
Training / Education

Critical Concepts of Tolerance Stacks 1994 3-day

This course, based on the ASME Y14.5M-1994 standard, provides an in-depth explanation of how to use tolerance stacks to analyze product designs and how to use geometric tolerances in stacks. You will learn the essential methods and concepts used for creating 1D part and assembly tolerance stacks.
Training / Education

Advanced Concepts of GD&T 1994 3-day

This course teaches the advanced concepts of GD&T as prescribed in the ASME Y14.5M-1994 Standard. Utilizing the expertise of world-renowned GD&T expert Alex Krulikowski, this course offers an in-depth explanation of advanced GD&T topics like composite tolerancing, tolerance analysis, datum selection, non-rigid part dimensioning, and many more key dimensioning topics, including the system approach for part dimensioning. Newly acquired learning is reinforced throughout the class with more than 250 practice problems.
Training / Education

The Art of Leadership Presence

Anytime
Stuff happens. Maybe your team responds to an idea in a way you never expected. Maybe the people who were supposed to show up didn’t. Maybe a colleague expresses concern with your leadership style. Maybe someone finds a serious error in the report. We all experience surprises. What if you could meet these surprises with ease and confidence? And what if you could create, through your own personal presence, space for more positive, collaborative engagements between people? You can when you adopt the mindset of an improv actor!
Training / Education

Fundamentals of GD&T 1994 3-Day

This course teaches the terms, rules, symbols, and concepts of GD&T as prescribed in the ASME Y14.5M-1994 Standard. Utilizing the expertise of world-renowned GD&T expert Alex Krulikowski, the course offers an in-depth explanation of geometric symbols, including each symbol's requirements, tolerance zones, and limitations. It also includes a comparison of GD&T to coordinate tolerancing; an explanation of tolerance zones; Rules #1 and #2; form and orientation controls; tolerance of position; runout and profile controls. Newly acquired learning is reinforced throughout the class with more than 300 practice problems.
Training / Education

Introduction to Statistical Tolerance Stacks 1-day

This course is an introduction to statistical tolerance stacks, a crucial skill in today's competitive workplace. Utilizing the expertise of world-renowned GD&T expert Alex Krulikowski, the course includes a brief overview of several terms used in statistical stacks. It explains four methods for applying statistics to tolerance stacks and covers precautions about when and how to use statistics in stacks. Newly acquired learning is reinforced throughout the class with stacks that allow the student to practice applying statistical methods.
X