Refine Your Search

Search Results

Training / Education

Corrosion Engineering and Prevention

2020-05-18
The transportation industry, including motor vehicles, aircraft, rail, marine, commercial, off-road and defense vehicles, as well as infrastructures, energy sectors, raw materials, manufacturing, health and food industries all experience significant issues with corrosion which results in billions of dollars of loss each year. Corrosion education and prevention is essential to improve and increase the service life of parts and components which may have a significant impact on the economy of various industries and nations.
Training / Education

Understanding the FAA Parts Manufacturer Approval Process

2020-04-28
The requirements for producing an FAA approved replacement part can be daunting. Understanding the steps required in the FAA Parts Manufacturer Approval (PMA) process can greatly streamline the approval life-cycle and reduce unnecessary costs and delays, thereby shortening the time and cost to market. This course is designed for those organizations and individuals interested in designing and manufacturing replacement parts for civil aviation aircraft. This two-day course covers the crucial subjects and steps of the FAA-PMA approval process.
Training / Education

Applying DO-254 for Avionics Hardware Development and Certification

2020-02-13
The avionics hardware industry world-wide is now commonly required to follow DO-254 Design Assurance Guidance for Airborne Electronic Hardware for literally all phases of development: Safety, Requirements, Design, Logic Implementation, V&V, Quality Assurance, etc. The DO-254 standard is a companion to the software DO-178B standard; however, there are many differences between hardware and software which must be understood. This basic course introduces the intent of the DO-254 standard for commercial avionics hardware development.
Training / Education

Fundamentals of Threaded Fasteners

2019-12-18
Fastener experts believe that upwards of 95% of all fastener failures are the result of either the wrong fastener for the job or improper installation. Whether this shocking figure is accurate or not, it is irrefutable that threaded fasteners are poorly misunderstood by many in both the fastener and user communities. In October 1990 the USS Iwo Jima suffered a catastrophic steam valve accident minutes after leaving port following repairs to its steam plant. In one of the single most deadly events of Operation Desert Storm, ten of the eleven crewmen present in the engine compartment would lose their lives.
Training / Education

FAA Part 21 Certification Procedures for Products and Parts

2019-11-11
Part 21 is the FAA regulation that provides the regulatory framework to conduct certification of products and parts. This includes the engineering, airworthiness, production and quality systems. The aerospace industry is hinged around compliance with Part 21; however, comprehension of Part 21 and its role in civil certification is challenging. This course is designed to provide participants with an understanding of the processes that encompass aircraft certification, including compliance with FARs, certification procedures and post certification responsibilities.
Training / Education

Common Training for DPRV Personnel

2019-10-21
**Delivery Language is English unless noted otherwise with the date and location** In the aerospace industry, delegated product release is a process whereby a supplier has been provided the authority to act on behalf of a delegating organization to verify and release products without additional oversight from that delegating organization. Currently, each of these delegating organizations manages and conducts a unique training program for individuals responsible for their product release overcheck process. For suppliers producing products for multiple delegating organizations, each must then manage the multiple training requirements.
Training / Education

Materials Degradation in Mechanical Design: Wear, Corrosion, Fatigue and their Interactions Web Seminar RePlay

Anytime
Materials degradation from environmental conditions is a common factor that will often occur in mechanical equipment used in every type of environment. These processes can frequently materialize in unpredicted and harmful ways, especially when they interact and lead to early component damage or failure. Captured from five, two-hour sessions, this course summarizes the mechanisms that cause materials and mechanical components to degrade in service through exposure to deleterious mechanical and environmental conditions.
Training / Education

Fluids for Aerospace Hydraulic Systems

This four-hour short course provides an introduction to fluids for aerospace hydraulic systems. Topics covered include an introduction to basics fluid properties, rheology, tribology, and fluid product development. In addition, the history and performance of different classes of fluids are discussed in detail, and specific failure modes such as erosion and sludge formation will be described. Along with an introduction to fluid degradation, information on used oil analysis test methods and interpretation will be provided.
Training / Education

Metals Bundle

Anytime
Almost 75% of all elements are metals. Metals can be classified as either ferrous or non-ferrous and generally conduct electricity and heat well. Most metals are malleable and ductile and are, in general, heavier than other elemental substances.The following six on-demand courses are included in the Materials bundle.  Each course is approximately one-hour in duration. See Topics/Outline for additional details.
Training / Education

High Temperature Materials Bundle

Anytime
Metals and alloys all have different melting ranges depending on their chemistry. High temperature metals are much harder at room temperature, have exceptionally high melting points (usually above 2000 degree Celsius), and are resistant to wear, corrosion and deformation. The following five on-demand courses are included in the High Temperature Materials bundle.  Each course is approximately one-hour in duration. See Topics/Outline for additional details.
Training / Education

Polymers Bundle

Anytime
Polymers are thermoplastic, meaning that once the polymer is formed, it can be heated and reformed repeatedly. Both synthetic and natural polymers play an essential role because of their broad range of properties. Polymers are relatively low-cost and allow for a wide range of characteristics and colors. Polymers can be both thermal and electrical insulators and very resistant to chemicals. The following five on-demand courses are included in the Polymers bundle.  Each course is approximately one-hour in duration. See Topics/Outline for additional details.
Training / Education

Nonferrous Metals Bundle

Anytime
Nonferrous materials are malleable, are non-magnetic, and have no iron content which gives them higher resistance to rust and corrosion. The following five on-demand courses are included in the Nonferrous Metals bundle.  Each course is approximately one-hour in duration. See Topics/Outline for additional details. Introduction to Physical Properties  This course provides an an overview of manufacturing materials and their physical properties, including thermal, electrical, and magnetic properties and introduces volumetric characteristics, such as mass, weight, and density.
Training / Education

Ferrous Metals Bundle: Steel and Cast Iron

Anytime
Ferrous metals contain iron and are prized for their tensile strength and durability.  Most are magnetic and contain a high carbon content which generally makes them, with the exception of wrought iron and stainless steel, vulnerable to rust. The following seven on-demand courses are included in the Ferrous Materials Bundle: Steel and Cast Iron.  Each course is approximately one-hour in duration. See Topics/Outline for additional details.
Training / Education

Introduction to Materials Bundle

Anytime
The following six on-demand courses are included in the Introduction to Materials bundle.  Each course is approximately one-hour in duration. See Topics/Outline for additional details. Introduction to Physical Properties  This course provides an an overview of manufacturing materials and their physical properties, including thermal, electrical, and magnetic properties and introduces volumetric characteristics, such as mass, weight, and density.
Training / Education

Basics of Silicone Rubber Science and Technology

Silicone rubber is comprised of inorganic-organic polymers. These materials consist of an inorganic backbone with organic side groups attached to silicon atoms. This family of polymers possesses unmatched versatility giving the formulator and user multiple forms and methods to cross link the polymers into rubber materials having the widest service temperature range of any rubber material. This course is designed to provide the participant with a thorough understanding of silicone’s engineering characteristics.
Training / Education

Introduction to Rubber Science and Technology

Rubber – a loosely cross-linked network of polymer chains that when strained to high levels will forcibly return to at or near it original dimensions. This course is designed to provide the participant with a thorough understanding of rubber’s engineering characteristics. This class will introduce the various sources of rubber, both natural and synthetic. The class will contrast the differences between rubber and plastics; including thermoplastic rubber. Detailed discussions on how to select the correct rubber polymer for the application, highlighting the pros and cons of each major rubber type.
Training / Education

Adhesives Bundle

Anytime
Manufacturers increasingly rely on adhesives to assemble a variety of products, such as cars, computers, furniture, and toys. An adhesive is a substance used to join two or more materials. Adhesive bonding is the process of placing an adhesive between two surfaces, or substrates, and allowing it to harden, or cure. Structural adhesives are most commonly used in adhesive bonding, since they can easily withstand heavy loads. Epoxies, anaerobics, acrylics, silicones, urethanes, and cyanoacrylates are commonly used structural adhesives. These courses explain the fundamental concepts of adhesive bonding as they apply to product assembly.
Training / Education

Performance and Use of Polymer Plain Bearings in Transmission Design Web Seminar RePlay

Anytime
As part of a broad transmission design philosophy, the understanding and application of tribological systems is critical. The number of interacting surfaces within a modern automotive transmission continues to increase, while the demands on the system continue to press the limits of traditional technologies. The understanding of each surface interaction within the greater system becomes increasingly important as each component is asked to do more to benefit the overall system. This short course will present the tribological performance of polymeric plain bearings as related to transmission applications.
Training / Education

Understanding AS9120B2016 Standard Quality Management Systems & Requirements

The requirements of the AS9120, Rev. B, EN9120B and JIAQ9120B Standards have significantly changed and are based on the NEW ISO9001:2015 Standard. This two-day training program is designed to provide individuals with the knowledge necessary to understand and comprehend the NEW requirements described in AS9120 Rev. B, Quality Management Systems - Requirements for Aviation, Space, and Defense Distributors. The course includes classroom instruction combined with class exercises to further reinforce concepts and definitions now required by the standard.
Training / Education

AS91002016 Rev D Understanding the Requirements

Individuals responsible for quality management system, implementation, and auditing to the AS9100:2016 series of standards for Aviation, Space, and Defense will require an understanding of the requirements for the preparation and execution of the audit process as defined in these revised standards. Management and implementers of AS9100:2016 Rev. D within these organizations must also be aware of what these requirements mean for their company.
X