Refine Your Search

Topic

Search Results

Standard

Identification of Self-Propelled Sweepers and Cleaning Equipment Part 1 - Machines with a Gross Vehicle Mass Greater than 5000 kg

2021-07-20
CURRENT
J2130/1_202107
This SAE Standard applies to all self-propelled machines with a gross vehicle mass greater than 5000 kg that are utilized to clean material from highways, parking lots, airfield runways, outside paved areas that are principally exposed to vehicular traffic. These machines can also be involved with road construction or repaving work. Primary methods for material removal and cleaning can be by mechanical, pneumatic, washing and flushing systems, or in a combination of any system.
Standard

Identification of Self-Propelled Sweepers and Cleaning Equipment Part 2 - Machines with a Gross Vehicle Mass up to 5000 kg

2021-06-02
CURRENT
J2130/2_202106
This SAE Standard applies to all self-propelled machines with a gross vehicle mass up to 5000 kg that are utilized to clean material from outside paved areas, parkland, floors in non-residential buildings and areas principally exposed to pedestrian traffic. Primary methods for material removal can be by mechanical, pneumatic, washing and flushing systems, or in a combination of any system.
Standard

Technical Publications for Off-Road Self-Propelled Work Machines

2021-04-14
WIP
J920
This Recommended Practice applies to technical publications which present instructions for the proper unloading, set-up, installations, pre-delivery inspection, operation, and servicing of off-road self-propelled work machines as categorized in SAE J1116. Advertising/marketing and other pre-purchase publications are not included.
Standard

Off-Road Rim Maintenance Procedures and Service Precautions Diameter Code 20 and Larger

2019-02-21
CURRENT
J1337_201902
This SAE Recommended Practice covers the important fundamental maintenance and service precautions for all off-road single-piece and multi-piece rims. Detailed information on specific procedures concerning mounting, demounting, maintenance, and service of a particular type, style, or design of off-road rim assembly can be obtained by consulting rim or tire manufacturers or distributors. These procedures and service precautions should be considered in preparation of the machine service manual, the operator's manual, and workplace procedures.
Standard

Headlamps for Industrial Equipment

2017-10-10
CURRENT
J95_201710
This SAE Standard provides performance and general design requirements and related test procedures for headlamps for use on industrial wheeled equipment that may be operated on public roads.
Standard

Cast Shot and Grit Size Specifications for Peening and Cleaning

2017-10-10
CURRENT
J444_201710
This SAE Recommended Practice pertains to blast cleaning and shot peening and provides for standard cast shot and grit size numbers. For shot, this number corresponds with the opening of the nominal test sieve, in ten thousandths of inches1, preceded by an S. For grit, this number corresponds with the sieve designation of the nominal test sieve with the prefix G added. These sieves are in accordance with ASTM E 11. The accompanying shot and grit classifications and size designations were formulated by representatives of shot and grit suppliers, equipment manufacturers, and automotive users.
Standard

Identification of Self-Propelled Sweepers and Cleaning Equipment Part 2 - Machines with a Gross Vehicle Mass Up to 5000 kg

2015-03-27
HISTORICAL
J2130/2_201503
This SAE Standard applies to all self-propelled machines with a gross vehicle mass up to 5000 kg that are utilized to clean material from outside paved areas, parkland, floors in non-residential buildings and areas principally exposed to pedestrian traffic. Primary methods for material removal can be by mechanical, pneumatic, washing and flushing systems, or in a combination of any system.
Standard

Identification of Self-Propelled Sweepers and Cleaning Equipment Part 1 - Machines with a Gross Vehicle Mass Greater than 5000 kg

2015-03-27
HISTORICAL
J2130/1_201503
This SAE Standard applies to all self-propelled machines with a gross vehicle mass greater than 5000 kg that are utilized to clean material from highways, parking lots, airfield runways, outside paved areas that are principally exposed to vehicular traffic. These machines can also be involved with road construction or repaving work. Primary methods for material removal and cleaning can be by mechanical, pneumatic, washing and flushing systems, or in a combination of any system.
Standard

Safety Requirements for Procurement, Maintenance and Use of Hand-held Powered Tools

2014-09-12
CURRENT
AS6228
This SAE Aerospace Standard (AS) covers the requirements and technical guidance for evaluation of life-cycle cost, productivity, and safety/health factors related to power hand tool selection. It applies approaches to selection of quieter and lower vibration hand-held powered tools, with optimal ergonomic features, for the prevention of Hand-Arm Vibration Syndrome (HAVS), hearing loss and repetitive motion injuries. It suggests use of noise and vibration data provided by vendors to be verified and supplemented by information available through the National Institute for Occupational Safety and Health (NIOSH) and European Union databases. Inclusion/exclusion of data in this document is not intended to imply that all of the products described herein are the only production models that meet this standard. Consumers are requested to consult with manufacturers concerning lists of stock production models that meet this standard.
Standard

Technical Publications for Off-Road Self-Propelled Work Machines

2013-10-29
CURRENT
J920_201310
This Recommended Practice applies to technical publications which present instructions for the proper unloading, set-up, installations, pre-delivery inspection, operation, and servicing of off-road self-propelled work machines as categorized in SAE J1116. Advertising/marketing and other pre-purchase publications are not included.
Standard

Operator Controls on Industrial Equipment

2013-07-09
CURRENT
J297_201307
This SAE Standard is intended to improve operator efficiency and convenience by providing guidelines for the uniformity of location and direction of motion of operator controls used on industrial wheeled equipment. The controls covered are those centrally located at the operator's normal position.
X