Search Results

Standard

Brake Insulator Damping Measurement Procedure

2024-04-02

WIP

J3001

This procedure is applicable to modes from 500 and 13,000 Hz. The parameters measured with this procedure are defined as the damping factor, ξ for first nine vibration modes of the beam. The measurement will be done in free-free conditions and with temperature.

Standard

Nickel Wire and Ribbon 99Ni

2024-04-01

CURRENT

AMS5555G

This specification covers a nickel in the form of round wire and rectangular ribbon.

Standard

Powder, Plasma Spray 50 (88WC - 12Co) + 35 (70Ni - 16.5Cr - 4Fe - 4Si - 3.8B) + 15 (80Ni - 20Al) Three-Component Mixture

2024-04-01

CURRENT

AMS5792C

This specification covers a blend of tungsten carbide-cobalt aggregate, a nickel alloy, and a nickel aluminum aggregate in the form of powder.

Standard

Pins, Cotter, Steel, Corrosion Resistant UNS S30200 Procurement Specification for

2024-04-01

CURRENT

AS7210B

This procurement specification covers split cotter pins with optional ends (see Figure 1), made from a corrosion resistant steel of the type identified under the Unified Numbering System as UNS S30200.

Standard

Steel Bars, Forgings, and Mechanical Tubing and Forging Stock, Carburizing, Aircraft Quality, 0.50Cr - 1.8Ni - 0.25Mo - (0.17 - 0.23C), (SAE 4320H)

2024-04-01

CURRENT

AMS6299H

This specification covers an aircraft-quality, low-alloy steel in the form of bars, forgings, mechanical tubing, and forging stock.

Standard

Spring Pins, Tubular, Carbon Steel, Procurement Specification for

2024-04-01

CURRENT

AS7205A

This specification covers tubular-shaped pins, fabricated from carbon steel, having a full-length longitudinal slot to permit flexure when inserted into a hole.

Standard

Steel, Corrosion- and Heat-Resistant, Bars, Wire, Forgings, Mechanical Tubing, Rings, and Stock for Forgings and Flash-Welded Rings 17Cr (430), Annealed

2024-04-01

CURRENT

AMS5627J

This specification covers a corrosion- and heat-resistant steel in the form of bars, wire, forgings, mechanical tubing, flash-welded rings, and stock for forging or flash-welded rings.

Standard

Spring Pins, Tubular, Coiled Corrosion Resistant Nickel Base Alloy Procurement Specification For

2024-03-22

CURRENT

AS4983A

This procurement specification covers tubular-shaped, coiled spring pins made of a corrosion resistant nickel base alloy of the type identified under the Unified Numbering System as UNS N07718.

Standard

Engine and Transmission Identification Numbers

2024-03-18

CURRENT

J129_202403

This SAE Recommended Practice has been established to provide direction for the design and installation of an identification number (IN) as assigned to vehicle engines, transmissions, and transaxles. The IN is used for tracking or traceability of these components. In adhering to these recommended practices, facility of application in factory production and appearance quality are matters for manufacturer control. Reference SAE J853.

Standard

BEARING, ROLLER, NEEDLE, SINGLE ROW, HEAVY DUTY, TYPE I, ANTIFRICTION, INCH

2024-03-18

CURRENT

AS24461E

Standard

Identification of Standard Utility Parts – Bolts and Nuts

2024-03-04

CURRENT

AIR3260A

This information report presents recommendations on part number marking which provides for the maximum identification on bolts and nuts while ensuring adequate readability.

Standard

Standard Sheet Steel Thickness and Tolerances

2024-03-04

CURRENT

J1058_202403

This SAE Recommended Practice provides an orderly series for designating the thickness of unocated and coated hot-rolled and cold-rolled sheet and strip. This document also provides methods for specifying thickness tolerances.

Standard

Identification and Packaging Elastomeric Products

2024-03-04

CURRENT

AMS2810J

This specification provides requirements for the identification and packaging of sheet, strip, extrusions, and molded parts made of natural rubber, synthetic rubber, reclaimed rubber, and combinations of the above with other materials such as asbestos, cork, and fabrics. AMS2817 covers preferred requirements for identification and packaging of preformed packings.

Standard

INSERT, SCREW THREAD, HELICAL COIL, METRIC SERIES, SCREW LOCKING, CRES, UNCOATED

2024-02-27

CURRENT

MA3329E

Standard

Brake Insulator Design Guidelines

2024-02-26

WIP

J3317

This document applies to shims only and will outline insulator design guidelines for improved manufacturability, cost and optimized product performance (Durability, bondability…)

Standard

Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Irradiance Xenon-Arc Apparatus

2024-02-23

CURRENT

J2412_202402

This test method specifies the operating procedures for a controlled-irradiance, xenon-arc apparatus used for the accelerated exposure of various automotive interior trim components. Test duration, as well as any exceptions to the specimen preparation and performance evaluation procedures contained in this document, are covered in material specifications of the different automotive manufacturers. Any deviation to this test method, such as the use of optical filter combinations, is to be agreed upon by contractual parties.

Standard

Insert, Screw Thread, Self-Locking, UNS S66286, Key Locked, Plastic Self Locking Device, Solid Film Lubricant Procurement Specification For

2024-02-12

CURRENT

AS4723A

This procurement specification covers inserts made from A286 alloy of the type identified under the Unified Numbering System as UNS S66286, solid film lubricated with a piastic self locking device, integrated locking keys to positively secure the insert against rotation when properly installed in threaded holes.

Standard

Corrosion Removing Compound for Aircraft Surfaces

2024-02-12

CURRENT

AMS1640D

This specification establishes requirements for a corrosion-removing compound in the form of a liquid concentrate.

Standard

Nut, Self-Locking, 0.7500 thru 1.5000 Thread Sizes, UNS S66286, 160,000 psi, 800 °F, UNJ Thread – Procurement Specification

2024-02-06

CURRENT

AS5377A

This specification establishes the requirements for self-locking wrenchable nuts with thread sizes 0.7500 thru 1.5000 inches. The nuts are made of corrosion and heat resistant precipitation hardenable iron base alloy of the type identified under the Unified Numbering System as UNS S66286 and of 160,000 psi axial tensile strength at room temperature, with maximum conditioning temperature of parts at 800 °F.

Best Practice

RM13004 - Defect Prevention Quality Tools to Support APQP & PPAP

2024-01-26

CURRENT

AESQRM004202401

AS13100 AESQ Quality Management System Requirements for Aero Engine Design and Production Organizations Standard was created to replace customer specific quality requirements – leading to simplification and harmonization between engine manufacturer supply chains. AS13100 is supported by a series of 13 AESQ Reference Manuals (RM) that provide additional detail on certain subjects to describe the intent of the standard and to provide guidance on deployment. The Reference Manuals are designed to enable the supply chain to deploy the AS13100 requirements efficiently and effectively. The AESQ RMs provide case studies, guidance material, forms and checklists specific to each section of the standard to aid the user with implementation.