Search Results

Standard

Rivets, Solid, UNS N04400, Corrosion Resistant 67Ni - 31Cu Procurement Specification for

2024-04-23

CURRENT

AS7233A

This procurement specification covers aircraft-quality solid rivets made from a corrosion resistant nickel-copper alloy of the type identified under the Unified Numbering System as UNS N04400 and of 46 ksi minimum shear strength.

Standard

Nickel Wire and Ribbon 99Ni

2024-04-01

CURRENT

AMS5555G

This specification covers a nickel in the form of round wire and rectangular ribbon.

Standard

Steel Bars, Forgings, and Mechanical Tubing and Forging Stock, Carburizing, Aircraft Quality, 0.50Cr - 1.8Ni - 0.25Mo - (0.17 - 0.23C), (SAE 4320H)

2024-04-01

CURRENT

AMS6299H

This specification covers an aircraft-quality, low-alloy steel in the form of bars, forgings, mechanical tubing, and forging stock.

Standard

Steel, Corrosion- and Heat-Resistant, Bars, Wire, Forgings, Mechanical Tubing, Rings, and Stock for Forgings and Flash-Welded Rings 17Cr (430), Annealed

2024-04-01

CURRENT

AMS5627J

This specification covers a corrosion- and heat-resistant steel in the form of bars, wire, forgings, mechanical tubing, flash-welded rings, and stock for forging or flash-welded rings.

Standard

Aluminum Alloy Extrusions, 7.7Zn - 2.4Mg - 1.6Cu - 0.16Cr (7049-T73511), Solution Heat Treated, Stress Relieved, and Overaged

2024-03-22

CURRENT

AMS4157F

This specification covers an aluminum alloy in the form of extruded bars, rods, wire, shapes, and tubing 5.000 inches (127.00 mm) and under in nominal diameter or least thickness (wall thickness of tubing) (see 8.5).

Standard

Nickel Alloy, Corrosion- and Heat-Resistant, Sheet, Strip, and Plate 47.5Ni - 22Cr - 1.5Co - 9.0Mo - 0.60W - 18.5Fe (Alloy X or HX) Solution Heat Treated

2024-03-22

CURRENT

AMS5536R

This specification covers a corrosion- and heat-resistant nickel alloy in the form of sheet, strip, and plate.

Standard

Aluminum Alloy, Die and Hand Forgings, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7175-T74), Solution and Precipitation Heat Treated

2024-03-18

WIP

AMS4149G

This specification covers an aluminum alloy in the form of die and hand forgings 6.000 inches (152.00 mm) and under in nominal thickness at time of heat treatment (see 8.6).

Standard

Aluminum Alloy, Alclad Sheet 3.8Cu - 1.0Mg - 0.30Mn - 0.60Zn (Alclad 2056-T3) Solution Heat Treated and Cold Worked

2024-03-12

CURRENT

AMS4298B

This specification covers an aluminum alloy in the form of sheet 0.063 to 0.236 inch (1.60 to 6.00 mm), incl, in thickness, clad on both sides (see 8.4).

Standard

Motor Vehicle Brake Fluid

2024-03-12

CURRENT

J1703_202403

This SAE Standard covers motor vehicle brake fluids of the nonpetroleum type, based upon glycols, glycol ethers, and appropriate inhibitors, for use in the braking system of any motor vehicle such as a passenger car, truck, bus, or trailer. These fluids are not intended for use under arctic conditions. These fluids are designed for use in braking systems fitted with rubber cups and seals made from styrene-butadiene rubber (SBR), or a terpolymer of ethylene, propylene, and a diene (EPDM).

Standard

Motor Vehicle Brake Fluid Based Upon Glycols, Glycol Ethers, and the Corresponding Borates

2024-03-12

CURRENT

J1704_202403

This SAE Standard covers motor vehicle brake fluids of the nonpetroleum type, based upon glycols, glycol ethers, and borates of glycol ethers, and appropriate inhibitors for use in the braking system of any motor vehicle, such as a passenger car, truck, bus, or trailer. These fluids are not intended for use under arctic conditions. These fluids are designed for use in braking systems fitted with rubber cups and seals made from styrene-butadiene rubber (SBR) or a terpolymer of ethylene, propylene, and a diene (EPDM).

Standard

Aluminum Sheet, Laminated, Surface Bonded

2024-03-11

WIP

AMS4013J

This specification covers aluminum and aluminum alloy foil in the form of laminated sheet.

Standard

Aluminum Alloy, Die and Hand Forgings, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T74), Solution Heat Treated and Aged

2024-03-11

WIP

AMS4131F

This specification covers an aluminum alloy in the form of die forgings and hand forgings up to 6.000 inches (152.40 mm) in nominal thickness at the time of heat treatment (see 8.4).

Standard

Aluminum Alloy, Hand Forgings and Rolled Rings, 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T852/T851), Solution Heat Treated, Mechanically Stress Relieved, and Precipitation Heat Treated

2024-03-11

WIP

AMS4144H

This specification covers an aluminum alloy in the form of hand forgings 17 inches (432 mm) and under in nominal thickness, and rolled rings up to 6 inches, incl (152 mm, incl) in nominal thickness at the time of heat treatment (see 8.5).

Standard

Aluminum Alloy, Hand Forgings 8.0Zn - 1.0Cu - 1.6Mg - 0.12Zr (7037-T7452) Solution Heat Treated, Compression Stress Relieved, and Overaged (Composition similar to UNS A97037)

2024-03-11

WIP

AMS4456B

This specification covers an aluminum alloy in the form of hand forgings 11.000 inches (280 mm) and under in nominal thickness and of forging stock of any size (see 8.6).

Standard

Aluminum Alloy, Extrusions, 4.4Cu - 1.5Mg - 0.60Mn (2024-T3510), Solution Heat Treated, Cold Worked, Stress-Relieved by Stretching, Unstraightened

2024-03-08

WIP

AMS4164K

This specification covers an aluminum alloy in the form of extruded bars, rods, wire, profiles, and tubing produced with cross sectional area of 32 in2 (206 cm2) maximum.

Standard

Aluminum Alloy, Plate, 6.2Zn - 1.8Cu - 2.4Mg - 0.13Zr (7010-T7651), Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated

2024-03-08

WIP

AMS4204E

This specification covers an aluminum alloy in the form of plate 0.250 to 5.500 inch (6.35 to 139.70 mm), inclusive in nominal thickness (see 8.5).

Standard

Aluminum Alloy Bars, Rods, and Wire, Rolled or Cold Finished, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-F), As Fabricated, or When Specified, Annealed (7075-O)

2024-03-08

WIP

AMS4186F

This specification covers an aluminum alloy in the form of bars, rods, and wire, in the sizes shown in 3.3.3, in the “as fabricated (F) temper” (see 8.5). When specified, product shall be supplied in the annealed (O) condition.

Standard

Aluminum Alloy, Die and Hand Forgings and Rolled Rings, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6), Solution and Precipitation Heat Treated

2024-03-08

WIP

AMS4126E

This specification covers an aluminum alloy in the form of die forgings 4 inches (102 mm) and under in nominal thickness at time of heat treatment, hand forgings up to 6 inches (152 mm) incl, in as forged thickness, rolled rings with wall thickness up to 3.5 inches (89 mm) incl, and stock of any size for forging or rolled rings (see 8.6).

Standard

Aluminum Alloy Forgings and Rolled or Forged Rings, 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T6), Solution and Precipitation Heat Treated

2024-03-08

WIP

AMS4143G

This specification covers an aluminum alloy in the form of die and hand forgings 4 inches (102 mm) and under in thickness, rolled or forged rings 2.50 inches (63.5 mm) and under in radial thickness, and stock of any size for forging or rings (see 8.5).

Standard

Castings, Aluminum Alloy Sand, 5.0Si - 1.2Cu - 0.50Mg (355.0-T71), Solution Heat Treated and Overaged

2024-03-08

WIP

AMS4214L

This specification covers an aluminum alloy in the form of sand castings.