Refine Your Search

Date

Date

Tests and Testing Automotive Starter Battery Standards Committee

Search Results

Viewing 1 to 20 of 21
12Next >Last >>
Sort by published
Standard

Storage Batteries
2023-09-28
CURRENT
J537_202309
This SAE Standard serves as a guide for testing procedures of automotive 12 V storage batteries. The information contained herein was originally developed based on traditional ICE operation but can be more broadly applicable to other vehicle architectures. Although the test procedures contained herein are written from the standpoint of a 12 V nominal battery, they can be scaled for batteries with different nominal voltages.
Standard

Test Procedure for Battery Flame Retardant Venting Systems
2018-11-12
CURRENT
J1495_201811
This SAE Standard details procedures for testing lead-acid SLI (starting, lighting, and ignition), heavy-duty, EV (electric vehicle), and RV (recreational vehicle) batteries, to determine the effectiveness of the battery venting system to retard the propagation of an externally ignited flame of battery gas into the interior of the battery under sustained overcharge conditions. NOTE: At this time, 2018, there is no known comparable ISO Standard.
Standard

Comprehensive Life Test for 12 V Automotive Storage Batteries
2018-05-07
CURRENT
J2801_201805
This SAE Standard applies to 12 V, flooded and absorptive glass mat lead acid automotive storage batteries of 200 minutes or less reserve capacity and cold crank capacity greater than 200 amperes. This life test is considered to be comprehensive in terms of battery manufacturing technology; applicable to lead-acid batteries containing wrought or cast positive grid manufacturing technology and providing a reasonable correlation for hot climate applications. This document is intended as a guide toward standard practice, but may be subject to change to keep pace with experience and technical advances.
Standard

Storage Batteries
2016-04-05
HISTORICAL
J537_201604
This SAE Standard serves as a guide for testing procedures of automotive 12 V storage batteries.
Standard

Comprehensive Life Test for 12 V Automotive Storage Batteries
2013-08-14
HISTORICAL
J2801_201308
This SAE Standard applies to 12 V, flooded and absorptive glass mat lead acid automotive storage batteries of 200 minutes or less reserve capacity and cold crank capacity greater than 200 amperes. This life test is considered to be comprehensive in terms of battery manufacturing technology; applicable to lead-acid batteries containing wrought or cast positive grid manufacturing technology and providing a reasonable correlation for hot climate applications. This document is intended as a guide toward standard practice, but may be subject to change to keep pace with experience and technical advances.
Standard

Test Procedure for Battery Flame Retardant Venting Systems
2013-02-11
HISTORICAL
J1495_201302
This SAE Standard details procedures for testing lead-acid SLI (starting, lighting, and ignition), Heavy-Duty, EV (electric vehicle) and RV (recreational vehicle) batteries to determine the effectiveness of the battery venting system to retard the propagation of an externally ignited flame of battery gas into the interior of the battery where an explosive mixture can be present. NOTE: At this time 2011, there is no known comparable ISO Standard.
Standard

Life Test for Automotive Storage Batteries
2012-12-03
CURRENT
J240_201212
This SAE Standard applies to 12 V, flooded lead acid automotive storage batteries of 180 minutes or less reserve capacity using cast positive grid technology only. This life test simulates automotive service when the battery operates in a voltage regulated charging system. It subjects the battery to charge and discharge cycles comparable to those encountered in automotive service. Other performance and dimensional information is contained in the latest issue of SAE J537. This document is intended as a guide toward standard practice, but may be subject to change to keep pace with experience and technical advances.
Standard

Test Procedure for Battery Flame Retardant Venting Systems
2012-08-06
HISTORICAL
J1495_201208
This SAE Standard details procedures for testing lead-acid SLI (starting, lighting, and ignition), Heavy-Duty, EV (electric vehicle) and RV (recreational vehicle) batteries to determine the effectiveness of the battery venting system to retard the propagation of an externally ignited flame of battery gas into the interior of the battery where an explosive mixture can be present.
Standard

Life Test for Heavy-Duty Storage Batteries (Lead Acid Type only)
2012-02-21
HISTORICAL
J2185_201202
This SAE Standard applies to lead-acid 12 V heavy-duty storage batteries as described in SAE J537 and SAE J930 for uses in starting, lighting and ignition (SLI) applications on motor vehicles and/or off-road machines. These applications have some of the following characteristics: a High levels of power are required to start the vehicle’s internal combustion engine. The need to supply this power limits the maximum depth of discharge to a fraction of the total capacity of the battery.
Standard

Storage Batteries
2011-05-23
HISTORICAL
J537_201105
This SAE Standard serves as a guide for testing procedures of automotive 12 V storage batteries and as a publication providing information on container holddown configuration and terminal geometry.
Standard

Life Test for Automotive Storage Batteries
2007-04-24
HISTORICAL
J240_200704
This SAE Standard applies to 12 V, flooded lead acid automotive storage batteries of 180 minutes or less reserve capacity using cast positive grid technology only. This life test simulates automotive service when the battery operates in a voltage regulated charging system. It subjects the battery to charge and discharge cycles comparable to those encountered in automotive service. Other performance and dimensional information is contained in the latest issue of SAE J537. This document is intended as a guide toward standard practice, but may be subject to change to keep pace with experience and technical advances.
Standard

Comprehensive Life Test for 12 V Automotive Storage Batteries
2007-04-16
HISTORICAL
J2801_200704
This SAE Standard applies to 12 V, flooded and absorptive glass mat lead acid automotive storage batteries of 180 minutes or less reserve capacity and cold crank capacity greater than 200 amperes. This life test is considered to be comprehensive in terms of battery manufacturing technology; applicable to lead-acid batteries containing wrought or cast positive grid manufacturing technology and providing a reasonable correlation for hot climate applications. This document is intended as a guide toward standard practice, but may be subject to change to keep pace with experience and technical advances.
Standard

Test Procedure for Battery Flame Retardant Venting Systems
2005-06-30
HISTORICAL
J1495_200506
This SAE Standard details procedures for testing lead-acid SLI (starting, lighting, and ignition), Heavy-Duty, EV (electric vehicle) and RV (recreational vehicle) batteries to determine the effectiveness of the battery venting system to retard the propagation of an externally ignited flame of battery gas into the interior of the battery where an explosive mixture is usually present.
Standard

STORAGE BATTERIES
1992-06-01
HISTORICAL
J537_199206
This SAE Standard serves as a guide for testing procedures and as a publication providing a record of current production batteries, their ratings, and container description. Any battery with planned significant usage may be submitted for inclusion in the Tables of use. (Reference Section 5 and Chart A1 of the Appendix.)
12Next >Last >>
X