Search Results

Standard

Cast Shot and Grit Size Specifications for Cleaning and Peening

2023-06-27

CURRENT

J444_202306

This SAE Recommended Practice pertains to blast cleaning and shot peening and provides for standard cast shot and grit size numbers. For shot, this number corresponds with the opening of the nominal test sieve, in ten thousandths of inches1, preceded by an S. For grit, this number corresponds with the sieve designation of the nominal test sieve with the prefix G added. These sieves are in accordance with ASTM E11. The accompanying shot and grit classifications and size designations were formulated by representatives of shot and grit suppliers, equipment manufacturers, and automotive users.

Standard

Cut Wire Shot

2022-06-27

CURRENT

J441_202206

This SAE Recommended Practice is considered to be tentative and is subject to modification to meet new developments or requirements. It is offered as a guide in the selection and use of cut wire shot.

Standard

Metallic Shot and Grit Mechanical Testing

2022-05-04

CURRENT

J445_202205

This SAE Information Report is intended to provide users and producers of metallic shot and grit2 with general information on methods of mechanically testing metal shot in the laboratory.

Standard

Test Strip, Holder, and Gage for Shot Peening

2022-05-04

CURRENT

J442_202205

This SAE Recommended Practice defines requirements for equipment and supplies to be used in measuring shot peening arc height and other surface enhancement processes. It is intended as a guide toward standard practice and is subject to change to keep pace with experience and technical advances. Guidelines for use of these items can be found in SAE J443 and SAE J2597.

Standard

Specifications for Low Carbon Cast Steel Shot

2021-07-07

CURRENT

J2175_202107

This SAE Recommended Practice describes chemical analysis, hardness, microstructure, and physical characteristic requirements for low carbon cast steel shot to be used for shot peening or blast cleaning operations.

Standard

Test Strip, Holder, and Gage for Shot Peening

2020-02-27

HISTORICAL

J442_202002

This SAE Recommended Practice defines requirements for equipment and supplies to be used in measuring shot peening arc height and other surface enhancement processes. Guidelines for use of these items can be found in SAE J443 and SAE J2597.

Standard

High-Carbon Cast-Steel Shot

2019-10-31

CURRENT

J827_201910

This SAE Recommended Practice describes chemical composition and physical characteristic requirements for high-carbon cast-steel shot to be used for shot peening or blast cleaning operations.

Standard

Test Strip, Holder, and Gage for Shot Peening

2019-06-06

HISTORICAL

J442_201906

This SAE standard defines requirements for equipment and supplies to be used in measuring shot peening arc height and other surface enhancement processes. Guidelines for use of these items can be found in SAE J443 and SAE J2597.

Standard

Ø SIZE CLASSIFICATION AND CHARACTERISTICS OF GLASS BEADS FOR PEENING

2019-05-03

CURRENT

J1173_201905

This specification covers the characteristics of glass beads used for peening, and provides for standard glass bead size numbers.

Standard

High-Carbon Cast-Steel Grit

2019-02-21

CURRENT

J1993_201902

This SAE Recommended Practice describes the chemical composition, and physical characteristic requirements for high-carbon cast-steel grit, to be used for blast cleaning and etching operations.

Standard

Test Strip, Holder, and Gage for Shot Peening

2017-08-09

HISTORICAL

J442_201708

This SAE standard defines requirements for equipment and supplies to be used in measuring shot peening arc height and other surface enhancement processes. Guidelines for use of these items can be found in SAE J443 and SAE J2597.

Standard

Specifications for Low Carbon Cast Steel Shot

2015-06-18

HISTORICAL

J2175_201506

This SAE Recommended Practice describes chemical analysis, hardness, microstructure, and physical characteristic requirements for low carbon cast steel shot to be used for shot peening or blast cleaning operations.

Standard

High-Carbon Cast-Steel Shot

2013-10-16

HISTORICAL

J827_201310

This SAE Recommended Practice describes chemical composition and physical characteristic requirements for high-carbon cast-steel shot to be used for shot peening or blast cleaning operations.

Standard

High-Carbon Cast-Steel Grit

2013-10-16

HISTORICAL

J1993_201310

This SAE Recommended Practice describes the chemical composition, and physical characteristic requirements for high-carbon cast-steel grit, to be used for blast cleaning and etching operations.

Standard

Cut Wire Shot

2013-10-16

HISTORICAL

J441_201310

This SAE Recommended Practice is considered to be tentative and is subject to modification to meet new developments or requirements. It is offered as a guide in the selection and use of cut wire shot.

Standard

Test Strip, Holder, and Gage for Shot Peening

2013-02-18

HISTORICAL

J442_201302

This SAE standard defines requirements for equipment and supplies to be used in measuring shot peening arc height and other surface enhancement processes. Guidelines for use of these items can be found in SAE J443 and SAE J2597.

Standard

Surface Texture Control

2011-08-04

CURRENT

J449_201108

SAE J448, Surface Texture, has been set up for precision reference specimens using a controlled surface profile to obtain reproducible roughness values. These specimens are for instrument calibration. Appropriate symbols for roughness, waviness, and lay have also been standardized (ASA B46.1-1962 and SAE J448). For production control, especially from one geographical location to another, means are required to facilitate the inspection of surface characteristics called for by specifications which include not only roughness but profile waviness and lay. In order to integrate the requirements of the designer with the actual production of surfaces, a second grade of control standards must be adopted which will be functional in nature for the specific product being manufactured. These control standards may be Calibrated Pilot Specimens (actual parts with satisfactory texture) or Roughness Comparison Specimens (ASA B46.1-1962).

Standard

Cast Shot and Grit Size Specifications for Peening and Cleaning

2010-06-16

HISTORICAL

J444_201006

This SAE Recommended Practice pertains to blast cleaning and shot peening and provides for standard cast shot and grit size numbers. For shot, this number corresponds with the opening of the nominal test sieve, in ten thousandths of inches1, preceded by an S. For grit, this number corresponds with the sieve designation of the nominal test sieve with the prefix G added. These sieves are in accordance with ASTM E 11. The accompanying shot and grit classifications and size designations were formulated by representatives of shot and grit suppliers, equipment manufacturers, and automotive users.

Standard

Cut Wire Shot

2009-11-09

HISTORICAL

J441_200911

This SAE Recommended Practice is considered to be tentative and is subject to modification to meet new developments or requirements. It is offered as a guide in the selection and use of cut wire shot.

Standard

Test Strip, Holder, and Gage for Shot Peening

2008-11-24

HISTORICAL

J442_200811

This SAE Standard defines requirements for equipment/supplies to be used in measuring shot peening intensity. Guidelines for the use of these articles (test strip, holding fixture, and gage) are also included.