Search Results

Previous studies have shown that dosing AdBlue into the exhaust system of diesel engines to reduce nitrogen oxides can lead to an increase in the number of particles (PN). In addition to the influencing factors of exhaust gas temperature, exhaust gas mass flow and dosing quantity, the dosed medium itself (AdBlue) is not considered as a possible influence due to its regulation in ISO standard 22241. However, as the standard specifies limit value ranges for the individual regulated properties and components for newly sold AdBlue, in reality there is still some margin in the composition. This paper investigates the particle number increase due to AdBlue dosing using several CPCs. The increase in PN is determined by measuring the number of particles after DPF and thus directly before dosing as well as tailpipe. Several AdBlue products from different sources and countries are measured and their composition is also analyzed with regard to the limit values regulated in the standard.

While conventional methods like classical Transfer Path Analysis (TPA), Multiple Coherence Analysis (MCA), Operational Deflection Shape (ODS), and Modal Analysis have been widely used for road noise reduction, component-TPA from Model Based System Engineering (MBSE) is gaining attention for its ability to efficiently develop complex mobility systems. In this research, we propose a method to achieve road noise targets in the early stage of vehicle development using component-level TPA based on the blocked force method. An important point is to ensure convergence of measured test results (e.g. sound pressure at driver ear) and simulation results from component TPA. To conduct component-TPA, it is essential to have an independent tire model consisting of tire blocked force and tire Frequency Response Function (FRF), as well as full vehicle FRF and vehicle hub FRF.

By analyzing the dynamic distortion in all body closure openings in a complete vehicle, a better understanding of the body characteristics can be achieved compared to traditional static load cases such as static torsional body stiffness. This is particularly relevant for non-traditional vehicle layouts and electric vehicle architectures. The body response is measured with the so-called Multi Stethoscope (MSS) when driving a vehicle on a rough pavé road (cobble stone). The MSS is measuring the distortion in each opening in two diagonals. During the virtual development, the distortion is described by the relative displacement in diagonal direction in time domain using a modal transient analysis. The results are shown as Opening Distortion Fingerprint ODF and used as assessment criteria within Solidity and Perceived Quality. By applying the Principal Component Analysis (PCA) on the time history of the distortion, a Dominant Distortion Pattern (DDP) can be identified.

In this paper, an intelligent tire system is designed to estimate tire force by detecting the tire carcass deformation. The intelligent tire system includes a set of marker points on the inner liner of the tire to locate the position of tire carcass and a camera mounted on the rim to capture the position of these points under different driving conditions. An image recognition program is used to identify the coordinates of the marker points in order to determine the deformation of the tire carcass. According to the tire carcass stiffness test and the general tire carcass deformation theory, an approximate linear relationship between tire force and carcass deformation in all directions was obtained. The vertical force of the tire is determined by the distance between adjacent marker points. The longitudinal force and lateral force of the tire are estimated by measuring the longitudinal and lateral displacements of the marker points.

The present study introduces a novel approach for achieving path tracking of an unmanned bicycle in its local body-fixed coordinate frame. A bicycle is generally recognized as a multibody system consisting of four distinct rigid bodies, namely the front wheel, the front fork, the body frame, and the rear wheel. In contrast to most previous studies, the relationship between a tire and the road is now considered in terms of tire forces rather than nonholonomic constraints. The body frame has six degrees of freedom, while the rear wheel and front fork each have one degree of freedom relative to the body frame. The front wheel exhibits a single degree of freedom relative to the front fork. A bicycle has a total of nine degrees of freedom.

The steer-by-wire (SBW) system, an integral component of the drive-by-wire chassis responsible for controlling the lateral motion of a vehicle, plays a pivotal role in enhancing vehicle safety. However, it poses a unique challenge concerning steering wheel return control, primarily due to its fundamental characteristic of severing the mechanical connection between the steering wheel and the turning wheel. This disconnect results in the inability to directly transmit the self-aligning torque to the steering wheel, giving rise to complications in ensuring a seamless return process. In order to realize precise control of steering wheel return, solving the problem of insufficient low-speed return and high-speed return overshoot of the steering wheel of the SBW system, this paper proposes a steering wheel active return control strategy for SBW system based on the backstepping control method.

Simulators are essential part of the development process of vehicles and their advanced functionalities. The combination of virtual simulator and Hardware-in-the-loop technology accelerates the integration and functional validation of ECUs and mechanical components. The aim of this research is to investigate the benefits that can arise from the coupling of a steering Hardware-in-the-loop simulator and an advanced multi-contact tire model, as opposed to the conventional single-contact tire model. On-track tests were executed to collect data necessary for tire modelling using an experimental vehicle equipped with wheel force transducer, to measure force and moments acting on tire contact patch. The steering wheel was instrumented with a torque sensor, while tie-rod axial forces were quantified using loadcells. The same test set has been replicated using the Hardware-in-the-loop simulator using both the single-contact and multi-contact tire model.

This work aims to present the application of mode coupling to a Formula Student racing vehicle and propose a solution. The major modes of a vehicle are heave, pitch, roll, and warp. All these modes are highly coupled – which means changing suspension rates or geometry will affect all of them – while alleviating some and making others worse characteristics. Decoupling these modes, or at least some of them, would provide more control over suspension setup and more refined race car dynamics for a given layout of the racetrack. This could improve mechanical grip and yield significant performance improvements in closed-circuit racing. If exploited well, this approach could also assist in the operation of the vehicle at an optimal kinematic state of the suspension systems, to gain the best wheel orientations and maximize grip from the tires under the high lateral accelerations and varied excitations seen on a typical road course.

In today's automotive industry, the preference for suspension systems in high-end passenger vehicles is shifting away from conventional MacPherson or double wishbone setups and toward advanced double wishbones with split-type control arms or multi-link suspensions. This shift not only enhances the ride and handling experience but also introduces greater design complexities. This paper explains the design limitations of the conventional double wishbone front suspension (with 2 ball joints) and the opportunities presented by advanced double wishbone suspension designs, including split-type lower control arms (with 3 ball joints) and double split-type control arms (with 4 ball joints). Replacing either of the rigid links (upper/lower) of the conventional double wishbone suspension with a four-bar mechanism in the case of split-type control arm wishbone suspension significantly alters the behavior of the kingpin axis, leading to consequential effects on steering and suspension parameters.

In this study, a novel selective matching logic for a wheel/tire is proposed, to decrease the vehicle driving vibration caused by wheel/tire non-uniformity. The new logic was validated through matching simulation/in-line matching evaluation. A theoretical radial force variation model was established by considering the theoretical model of the existing references and the wheel/tire assembly mechanism. The model was validated with ZF’s high-speed uniformity equipment, which is standard in the tire industry. The validity of the new matching logic was verified through matching simulation and mass production in-line evaluation. In conclusion, the novel logic presented herein was demonstrated to effectively decrease the radial force variation caused by the wheel/tire.

The experimental control findings of increasing the handling performance so that the yaw motion of the vehicle is nimble and stable utilizing the upgraded rear wheel steering system equipped with dual-link actuators are shown in this work. In most automobiles, the steering axis is well defined in front suspension. However, unless the vehicle's rear suspension is a sort of double wishbone, the steering axis is not clearly defined in regular multi-link rear suspensions. As a result, most current automobiles have a suspension geometry feature in which the camber and toe angles change at the same time when the assist link is changed to steer the back wheels. To create lateral force from the rear tire while preserving maximum tire grip, the dual-link actuators control for modifying the strokes of suspension links must keep the camber angle constant and adjust only the toe angle.

Strength, creep, and fatigue of the chassis components are greatly influenced by the material used and its manufacturing process. Alloy wheel is one of the critical chassis components manufactured using the casting process. Secondary Dendrite Arm Spacing (SDAS) is one of the important microstructural parameters generated during the solidification stage of the casting process. SDAS has a significant role in altering the mechanical properties and the behavior of the component. Variation in solidification time and alloy composition will have a major impact in SDAS. The combined effect of SDAS with microstructural variations and the strength behavior has not been studied in earlier literature for an alloy wheel. The scope of this study is to perform casting simulation for an alloy wheel, predict the SDAS and capture the variation of mechanical properties (yield strength, ultimate tensile strength & elongation).

As data science technologies are being widely applied on various industries, the importance of data itself increased. A typical manufacturer company has a vast data set of products as 2D&3D drawing formats, but a common problem was that building a database from the 2D&3D drawings costs much, and it is hard to update the database after it once built. Also, it is high-cost job when the new factor researched and necessary to investigate the new factors on previously fixed or uploaded drawings. As new products are developed with time, these problems are getting more difficult. In this paper, an automated database building method using CATIA introduced and future probabilities are suggested. An aluminum wheel part was used as an example. An automated logic used CATIA V5’s VBA functions and was handled by python programming language.

Wheel drag is generally known to be proportional to the wheel opening area. However, predicting wheel drag through opening area is still very difficult and inaccurate because there are many other factors that affect wheel drag. To more accurately and effectively predict wheel drag in the early styling design stage, we introduced the wheel average depth (WAD) parameter and developed S/W to calculate WAD. As a result of analyzing the correlation between WAD and wheel drag for HKMC's mass-produced wheels, the R2 value was greatly improved compared to the correlation between the existing wheel opening area and wheel drag, and the prediction accuracy was doubled.

Correct simulations of rotating wheels are essential for accurate aerodynamic investigations of passenger vehicles. Therefore, modern automotive wind tunnels are equipped with five-belt moving ground systems with wheel drive units (WDUs) connected to the underfloor balance. The pressure distribution on the exposed areas of the WDU belts results in undesired lift forces being measured which must be considered to obtain accurate lift values for the vehicle. This work investigates the parasitic WDU lift for various configurations of a crossover SUV using numerical simulations that have been correlated to wind tunnel data. Several parameters were considered in the investigation, such as WDU size, WDU placement, tyre variants and vehicle configurations. The results show that the parasitic lift is more sensitive to the width than the length of the WDU. However, the belt length is also important to consider, especially if the wheel cannot be placed centred.

As the world population and industry increase, the demand for sustainable and efficient energy accelerates each day. One of the most energy-consuming sectors is transportation, which accounted for 27% of the total energy consumption in the US in 2022. This context provides the need to research and innovate on efficient vehicles and academic programs such as SAE supermileage or Shell Eco-Marathon which inspire students to build ultra-efficient vehicles. In vehicle efficiency, aerodynamics has high importance, and designing a low-drag vehicle is a key step. The purpose of this study is to analyze the vehicle aerodynamics of an ultra-efficient vehicle prototype built by Unisabana Herons Electric Vehicles for Shell Eco-Marathon 2022, regarding the influence on drag by having different configurations on spoked wheels, such as open spoked wheels, covered spokes, covered wheels, and a whole different body that follows a streamlined shape.

This research addresses the pressing need for reducing vehicle aerodynamic resistance, with a specific focus on mitigating wheel and tire resistance, which constitutes approximately 25% of the overall vehicle drag. While the prevailing method for reducing resistance in mass production development involves wheel opening reduction, it inadvertently increases wheel weight and has adverse effects on brake cooling performance. To overcome these challenges, novel complementary resistance reduction methods that can be employed in conjunction with an appropriate degree of wheel opening reduction are imperative. In this study, we introduce symmetrical wheels with a fan-like shape as a solution. The fan configuration influences the surrounding flow by either drawing it in or pushing it out, depending on the direction of rotation. Application of these fan-type wheels to a vehicle's wheels results in the redirection of flow inwards or outwards during high-speed driving due to wheel rotation.

The Baja Electrical All-Terrain Vehicle eATV is a versatile off-road vehicle designed to tackle challenging terrains and endure extreme conditions. Suspension system in a car connects the chassis to its wheels and it comprises of a system of springs, dampers and linkages. Independent suspension systems typically offer better handling and ride quality. This paper focuses on the optimization of the eATV’s suspension and steering systems to enhance its performance, stability, and maneuverability. For explanation purpose the design methodology that has been chosen for the suspension system of an all-terrain vehicle. A double wishbone independent suspension is designed for the front half, and an H-arm independent suspension is designed for the rear half. The steering system uses a Rack & Pinion gearbox along with this Ackerman geometry being used for the steering assembly. Theoretical values were validated with the help of ‘Lotus Shark’ software.

Increased popularity on SUV category in the market has led to high focus on performance attributes of SUVs. Considering high weight & CoG achieving target handling performance is always a challenge. Static Wheel Alignment parameters, especially Camber have shown significant contribution in Handling attributes of vehicle. This paper presents an experimental study on change in wheel camber under the influence of different vehicle loading conditions. In SUVs, generally wheel is subjected to large deflection from its high static loads which makes it quite difficult to maintain an ideal camber angle. Hence, it is important to analyze the camber angle variations under actual loading conditions. An in-house fixture is developed to emulate the actual vehicle loading conditions at rear wheel end. The multi-link rigid axle suspension with watt’s link assembly is mounted on the chassis-frame which is rigidly fixed to ground, and loads are achieved through hydraulic actuators at Wheels.

The standard usage of Combined Braking System (CBS) in lower cc/power 2-wheeler vehicles serves to reduce stopping distance and improve braking stability. The CBS system achieves this by engaging both the front and rear wheel brakes, taking advantage of the high load transfer characteristic during 2-wheeler braking. However, the current design of the CBS system relies on linear system analysis, based on vehicle geometry, load distribution, and tire-road friction. This approach overlooks the non-linearities inherent in braking dynamics, such as tire behavior and dynamic Center of Gravity (CoG) location. Consequently, the current CBS design methodology exhibits limitations, particularly in extreme scenarios where wheel lock-up may occur, such as on low friction surfaces or during panic braking. This paper proposes the incorporation of tire non-linearities into the design of CBS systems using Pacejka’s tire model.