This study experimentally investigates the combustion stability in RCCI engines along with the gaseous (regulated and unregulated) and particle emissions. Multifractal analysis is used to characterize the cyclic combustion variations in the combustion parameters (such as IMEP, CA50, Pmax) of the RCCI engine. The investigation is carried out on a modified single-cylinder diesel engine to operate in RCCI combustion mode. The RCCI combustion mode is tested for different fuel premixing ratio (r_p) and diesel injection timing (SOI) at fixed engine speed (1500rpm) and load (1.5 bar BMEP). The particle number characteristics and gaseous emissions are measured using a differential mobility spectrometer (DMS500) and Fourier Transform Infrared Spectroscopy (FTIR) along with Flame Ionizing Detector (FID), respectively. The results indicate that the NOx emissions decrease with advanced SOI while the methane (CH4) emission increases.
To mitigate the NOx emissions from diesel engines, the adoption of exhaust gas recirculation (EGR) has gained widespread acceptance as a technology. Nonetheless, employing EGR has the drawback of elevating soot emissions. The use of hydrogen-enriched air with EGR in a diesel engine (dual-fuel operation), offers the potential to decrease in-cylinder soot formation while simultaneously reducing NOx emissions. The present study numerically investigates the effect of hydrogen energy share and engine load on the formation and emission of soot and NOx emission from hydrogen-diesel dual-fuel engine. The numerical investigation is performed using an n-heptane/H2 reduced reaction mechanism with a two-step soot model in ANSYS FORTE. To enhance the accuracy of predicting dual-fuel combustion in a hydrogen-diesel dual-fuel engine, a reduced n-heptane reaction mechanism is integrated with a hydrogen reaction mechanism using CHEMKIN.
Since Non-Road Mobile Machinery (NRMM) China stage IV legislation has been implemented from 2023, some engines within maximum rated power between 37 to 560 kW are required for gaseous emissions, particulate matter(PM) and particulate number (PN) limitation, evaluated over testing cycle of Non-Road Transient Cycle (NRTC) and Non-Road Steady Cycle (NRSC). The pollutants from diesel engines, widely used in NRMM applications, can be controlled using aftertreatment systems which are comprise of a diesel oxidation catalyst (DOC) and a diesel particulate filter (DPF), or optionally a selective catalytic reduction (SCR). In this presentation, a compact D-DPF design is introduced and discussed on application in harvesters, tractors, and forklifts. Because harvesters have higher exhaust gas temperature than other applications, more passive regeneration behaviors were occurred during working conditions.
The electrochemical pseudo-two dimensional (P2D) model is one of the most promising approaches that provide suitable physical depth at reasonable computational costs for the simulation of lithium-ion batteries. The parameterization of the P2D model plays an important role as it decides about the acceptance and application range of subsequent simulation studies. Electrical impedance spectroscopy (EIS) is commonly applied to characterize the batteries and to obtain the exchange current density and the electrode diffusion coefficient of a given electrode material. EIS measurements performed with frequencies ranging from 1 MHz down to 10mHz typically do not cover clearly isolated solid state diffusion processes of lithium-ions in positive or negative electrode materials. To extend the frequency range down to 10µHz, the distribution relaxation times (DRT) is a sound analysis method.
The growing global adoption of electric vehicles (EVs) emphasizes the pressing need for a comprehensive understanding of thermal runaway in lithium-ion batteries. Prevention of the onset of thermal runaway and its subsequent propagation throughout the entire battery pack is one of the pressing challenges of lithium-ion batteries. In addition to generating excess heat, thermal runaway of batteries also releases hazardous flammable gases, posing risks of external combustion and fires. Most existing thermal runaway models in literature primarily focus on predicting heat release or the total amount of vent gas. In this study, we present a model capable of predicting both heat release and the transient composition of emitted gases, including CO, H2, CO2, and hydrocarbons, during thermal runaway events. We calibrated the model using experimental data obtained from an 18650 cell from the literature, ensuring the accuracy of reaction parameters.
During the development of an Internal Combustion Engine-based powertrain, traditional procedures for control strategies calibration and validation produce huge amount of data, that can be used to develop innovative data-driven applications, such as emission virtual sensing. One of the main criticalities is related to the data quality, that cannot be easily assessed for such a big amount of data. This work focuses on an emission modeling activity, using an enhanced Light Gradient Boosting Regressor and a dedicated data pre-processing pipeline to improve data quality. First thing, a software tool is developed to access a database containing data coming from emissions tests. The tool performs a data cleaning procedure to exclude corrupted data or invalid parts of the test. Moreover, it automatically tunes model hyperparameters, it chooses the best set of features, and it validates the procedure by comparing the estimation and the experimental measurement.
Mo free 1.6GPa bolt was developed for The Variable Compression Turbo (VC-Turbo) engine, which is effective for environmental friendliness and improving fuel efficiency and output. Mo contributes not only to the improvement of temper softening resistance, but also the improvement of delayed fracture resistance by precipitating fine carbides during high-temperature tempering and effecting as trap sites for hydrogen, so the main issue is to achieve both high strength and delayed fracture resistance. Therefore, developed steel is added Si to improve tempering softening resistance and achieve a microstructure superior to delayed fracture resistance to achieve both high strength and delayed fracture resistance. The delayed fracture test was done by Hc/He method. Hc means the limit of the diffusible hydrogen contents without causing delayed fracture under tightening, and He means diffusible hydrogen contents entering under the hydrogen charging condition equivalent to actual environment.
Abstract: Vehicle weight reduction is a popular research topic in automobile industry to achieve high efficiency and cost-effectiveness vehicles. Self-piercing rivets (SPR) are one of important joining approaches in light weight vehicle design. Numerical simulation of the riveting process could significantly boost design efficiency by reducing trial-and-error experiments. The traditional Finite Element Method (FEM) with element erosion cannot capture the large plastic deformation and complex failure behaviors in SPR process. Smoothed Particle Galerkin Method (SPG) is a genuine meshless method which is established basing on Galerkin weak form. SPG method uses a novel bond-based failure mechanism to keep the conservation of mass and momentum during material failure process. In this study, a combined FEM and Smoothed Particle Galerkin (SPG) approach was utilized to join sheet Aluminum 5754 and Cast aluminum Aural-2 using a full three-dimensional (3D) model in LS-DYNA/explicit.
Automotive body structures are being increasingly made in multi-material system consisting of steel, aluminum (Al) and fiber-reinforced plastics (FRP). Therefore, many joining tech-niques such as self-piercing riveting (SPR) and adhesive bonding have been developed. On the other hand, OEMs want to minimize the number of joining techniques to reduce the manufacturing complexity. Amount all joining methods, resistance Spot welding (RSW) is the most advanced and cost-effective one for body-in-white. However, RSW cannot be applied for joining dissimilar materials. Therefore, a novel Rivet Resistance Spot Welding method (RRSW) was developed in which Al or FRP Components can be directly welded to steel structures with existing welding systems. RRSW uses rivet-like steel elements as a welding adapter which are formed into Al or FRP components dur-ing their forming process. After that, they are welded to the steel components by RSW. This paper shows at first the results on Steel – Al RRSW.
A DMS500 engine exhaust particle size spectrometer was employed to characterize the effects of injection strategies on particulates emissions from a turbocharged gasoline direct injection (GDI) engine. The effects of operating parameters (injection pressure, secondary injection ratio and secondary injection end time) on particle diameter distribution and particle number density of emission was investigated. The experimental result indicates that the split injection can suppress the knocking tendency at higher engine loads. The combustion are improve, and the fuel consumption are significantly reduce, avoiding the increase in fuel pump energy consumption caused by the 50 MPa fuel injection system, but the delayed injection increases particulate matter emissions.
In the perspective of a reduction of emissions and a rapid decarbonization, especially for compression ignition engines, hydrogen plays a decisive role. The dual fuel technology is perfectly suited to the use of hydrogen, a fuel characterized by great energy potential. In fact, replacing, at the same energy content, the fossil fuel with a totally carbon free one, a significant reduction of the greenhouse gases, like carbon dioxide and total hydrocarbon, as well as of the particulate matter can be obtained. The dual fuel with indirect injection of gaseous fuel in the intake manifold, involves the problem of hydrogen autoignition. In order to avoid this difficulty, the optimal conditions for the injection of the incoming mixture into the cylinder were experimentally investigated. All combustion processes have been carried out on a research engine with optical access. The engine speed has been set at 1500 rpm, while the EGR valve has been deactivated.
Model-based development (MBD), which makes it possible to study and adjust contradictory requirements between large number of functions and systems to a high level in a short period of time was implemented within an engine development. However, in fact, elevating engine systems to more advanced levels are a challenge even by satisfying the stand-alone requirements of components. In addition, a still higher level of technology is required for the conflicting relationships between multiple functions, e.g., the power output of an engine and its strength and durability performance, and the reconciliation between the numerous related systems that comprise it. Such reconciling technology requires the consideration of overall optimization that envisions design over a wide range. For present-day development, this would require an extensive period of examination over several years. This presents the issue of requiring an extended period for verification.
The microstructure and mechanical properties of the Al-Si-Mg alloy with bulk and lattice structure produced by Laser-powder bed fusion additive manufacturing were systematically investigated. And then, the microstructure behavior of Al-Si-Mg alloys according to As-built and heat treatment was closely analyzed. Firstly, through grain size analysis, the cause of mechanical properties higher than casting materials and similar to forging materials could be analyzed. Secondly, mechanical changes according to the Mg2Si reinforced phase and cell-wall morphology after heat treatment were investigated. The Al-Si-Mg bulk and lattice structures are composed of a cell structure consisting of α-Al and eutectic Si. With heat treatment, needle-shape Mg2Si precipitates in the α-Al matrix. Simultaneously, collapse of the cell-wall morphology occurs.
The gasoline particulate filter (GPF) represents a practical solution for particulate emissions control in light-duty gasoline-fueled vehicles. It is also seen as an essential technology in North America to meet the upcoming US EPA tailpipe emission regulation, as proposed in the “Multi-pollutant Rule for Model Year 2027”. The goal of this study was to introduce advanced, uncoated GPF products and measure their particulate mass (PM) reduction performance within the existing US EPA FTP vehicle testing procedures, as detailed in Code of Federal Regulations (CFR) part 1066. Various state-of-the-art GPF products were characterized for their microstructure properties and lab-bench performance for pressure drop and filtration efficiency, were then subjected to an EPA-recommended 2000mile on-road break-in, and finally were tested on an AWD vehicle chassis-dyno emissions test cell at both 25C and -7C ambient conditions.
Gasoline particulate filters (GPF) have become a standard aftertreatment component in Europe, China, and since recently, India, where particulate emissions are based on a particle number (PN) standard. The anticipated evolution of regulations in these regions towards future EU7, CN7, and BS7 standards further enhances the needs with respect to the filtration capabilities of the GPFs used. Emission performance has to be met over a broader range in particle size, counting particles down to 10nm, and over a broader range of boundary conditions. The requirements with respect to pressure drop, aiming for as low as possible, and durability remain similar or are also enhanced further. To address these future needs new filter technologies have been developed. New technologies for uncatalyzed GPF applications have been introduced in our previous publications.
The impending emission regulations in both China (CN7) and the United States (Tier 4) are set to impose more stringent emission limits on hydrocarbons (HC), carbon monoxide (CO), nitrogen oxides (NOx), and particulate matter (PM). CN7 places particular emphasis on reducing particulate number (PN) thresholds, while the forthcoming United States Tier 4 legislation is primarily concerned with reducing the allowable particulate matter (PM) to an assumed limit of 0.5 mg/mile. Given the more stringent constraints on both PN and PM emissions, the development of enhanced aftertreatment solutions becomes imperative to comply with these new regulatory demands. Coated Gasoline Particulate Filters (cGPF) play a pivotal role as essential components for effective PN and PM abatement.