Search Results

Standard

Off-Road Tire Fire Handling Guidelines

2023-10-06

WIP

J2828

This SAE Informational report applies to tires used on off-road, rubber-tired work machines as identified in SAE J1116. This SAE document provides general guidelines for proper handling of potential and actual off-road tire fires and possible related explosions.

Standard

Off-Road Tire Replacement Guidelines

2022-04-18

WIP

J2611

This SAE information report covers the basic guidelines concerning off-road tire conditions that warrant replacement, removal, or repair. This material can assist the tire user in establishing specific written procedures for each job site.

Standard

Tire Size Differential - Articulated Wheel Loader

2019-11-20

CURRENT

J2204_201911

This SAE Standard applies to the usage of tires of the same nominal size and tread type, but with different outside diameter for articulated front-end loaders. Articulated four-wheel-drive front-end loader performance and component life can be affected by excessive differences in the tire outside circumference and/or diameter. The purpose is to provide specific guidelines for the usage of tires with different outside circumference and/or diameter on articulated front-end loaders.

Standard

Off-Road Tire and Rim Selection and Application

2019-11-20

CURRENT

J1315_201911

This SAE Standard provides general guidelines for the proper selection and application of off-road tires and rims, as defined in SAE J751 and applied to earthmoving machines described in SAE J1116 and ISO 6165.

Standard

Off-Road Rim Maintenance Procedures and Service Precautions Diameter Code 20 and Larger

2019-02-21

CURRENT

J1337_201902

This SAE Recommended Practice covers the important fundamental maintenance and service precautions for all off-road single-piece and multi-piece rims. Detailed information on specific procedures concerning mounting, demounting, maintenance, and service of a particular type, style, or design of off-road rim assembly can be obtained by consulting rim or tire manufacturers or distributors. These procedures and service precautions should be considered in preparation of the machine service manual, the operator's manual, and workplace procedures.

Standard

Tonne Kilometer Per Hour Application

2018-09-21

CURRENT

J1098_201809

This SAE Standard establishes the procedures for the application of Tonne Kilometer Per Hour (TKPH) rating values for off-the-road tires; utilizing empirical data formula, it describes the procedure for evaluating and predicting off-the-road tire TKPH requirements as determined by a work cycle analysis.

Standard

Tonne Kilometer Per Hour Test Procedure

2017-10-03

WIP

J1015

This SAE Standard establishes the Tonne Kilometer Per Hour Test Procedure for off-the-road tires. This document is applicable to only those tires used on certain earthmoving machines referenced in SAE J1116.

Standard

Off-Road Tire Replacement Guidelines

2017-02-13

CURRENT

J2611_201702

This SAE information report covers the basic guidelines concerning off-road tire conditions that warrant replacement, removal, or repair. This material can assist the tire user in establishing specific written procedures for each job site.

Standard

Tonne Kilometer Per Hour Test Procedure

2012-07-16

CURRENT

J1015_201207

This SAE Standard establishes the Tonne Kilometer Per Hour Test Procedure for off-the-road tires. This document is applicable to only those tires used on certain earthmoving machines referenced in SAE J1116.

Standard

Tonne Kilometer Per Hour Application

2012-03-01

HISTORICAL

J1098_201203

This SAE Standard establishes the procedures for the application of Tonne Kilometer Per Hour (TKPH) rating values for off-the-road tires; utilizing empirical data formula, it describes the procedure for evaluating and predicting off-the-road tire TKPH requirements as determined by a work cycle analysis.

Standard

Off-Road Rim Maintenance Procedures and Service Precautions Diameter Code 20 and Larger

2011-10-27

HISTORICAL

J1337_201110

This SAE Information Report covers the important fundamental maintenance and service precautions for all off-road single-piece and multi-piece rims. Detailed information on specific procedures concerning mounting, demounting, maintenance and service of a particular type, style, or design of off-road rim assembly can be obtained by consulting rim or tire manufacturers or distributors. These procedures and service precautions are guidelines to be considered in preparation of the machine service manual and operator's manual and workplace procedures. It is the intent of this Information Report to allow for further development and review of these guidelines and then make this document a Recommended Practice.

Standard

Revolutions Per Mile and Static Loaded Radius for Off-Road Tires

2011-10-25

CURRENT

J1544_201110

This recommended practice covers commonly used off-road tire sizes in tire type categories of E, G, and L in diagonal (bias) ply and radial ply constructions.

Standard

Off-Road Tire and Rim Classification-Construction Machines

2010-04-16

WIP

J751

To establish a standard nomenclature for tire classifications and tire and rim components. This Recommended Practice describes the classification of off-road tires and rims for use on construction machines, defines related terminology in common use, and shows representative construction details of component parts.

Standard

Off-Road Tire and Rim Classification-Forestry Machines

2009-09-25

WIP

J1440

This SAE Recommended Practice describes the classification of off-road tires and rims designed specifically for forestry machines (See sAE J1116), defines related terminology in common use, and shows representative construction details of component parts. To establish a standard nomenclature for tire classification lS (Log skidder) tire and rim components.

Standard

OFF-ROAD RIM MAINTENANCE PROCEDURES AND SERVICE PRECAUTIONS

1997-05-01

HISTORICAL

J1337_199705

This SAE Information Report covers the important fundamental maintenance and service precautions for all off-road single-piece and multi-piece rims. Detailed information on specific procedures concerning mounting, demounting, maintenance and service of a particular type, style, or design of off-road rim assembly can be obtained by consulting rim or tire manufacturers or distributors. It is recommended that these procedures and service precautions are considered in preparation of the machine service manual and operator's manual.

Standard

OFF-ROAD TIRE AND RIM CLASSIFICATION—CONSTRUCTION MACHINES

1997-04-01

CURRENT

J751_199704

This SAE Recommended Practice describes the classification of off-road tires and rims for use on construction machines (see SAE J1116), defines related terminology in common use, and shows representative construction details of component parts.

Standard

TON KILOMETER PER HOUR TEST PROCEDURE

1995-05-01

HISTORICAL

J1015_199505

This SAE Standard establishes the Ton Kilometer Per Hour Test Procedure for off-the-road tires. This document is applicable to only those tires used on earthmoving machines as defined in SAE J1057, and certain machines referenced in SAE J1116.

Standard

TON KILOMETER PER HOUR APPLICATION

1995-05-01

HISTORICAL

J1098_199505

This SAE Standard establishes the procedures for the application of Ton Kilometer Per Hour (TKPH) rating values for off-the-road tires; utilizing empirical data formula, it describes the procedure for evaluating and predicting off-the-road tire TKPH requirements as determined by a work cycle analysis. This document is applicable to only those tires used on earthmoving machines as defined in SAE J1057, and contains machines referenced in SAE J1116.

Standard

TIRE SIZE DIFFERENTIAL—ARTICULATED WHEEL LOADER

1994-05-01

HISTORICAL

J2204_199405

This SAE Standard applies to the usage of tires of the same nominal size and tread type, but with different outside diameter for articulated front-end loaders. Articulated four-wheel-drive front-end loader performance and component life can be affected by excessive differences in the tire outside circumference and/or diameter. The purpose is to provide specific guidelines for the usage of tires with different outside circumference and/or diameter on articulated front-end loaders.

Standard

OFF-ROAD TIRE AND RIM CLASSIFICATION-FORESTRY MACHINES

1993-09-01

CURRENT

J1440_199309

This SAE Recommended Practice describes the classification of off-road tires and rims designed specifically for forestry machines (see SAE J1116), defines related terminology in common use, and shows representative construction details of component parts.