A novel approach on range prediction of a hydrogen fuel cell electric truck C.Venkatesh - Manager - Product Development, Sustainable Mobility & Advanced Technologies Abstract: A novel approach on range prediction of a hydrogen fuel cell electric vehicle Abstract: Today's growing commercial vehicle population creates a demand for fossil fuel surplus requirement and develops highly polluted urban cities in the world. Hence addressing both factors are very much essential. Battery electric vehicles are with limited vehicle range and higher charging time. So it is not suitable for the long-haul application. Hence the hydrogen fuel cell based electric vehicles are the future of the commercial electric vehicle to achieve long range, zero emission and alternate for reducing fossil fuels requirement. The hydrogen fuel-cell electric vehicle range, it means the total distance covered by the vehicle in a single filling of hydrogen into the onboard cylinders.
A high impetus from Government on road infrastructure development, is giving a fillip to passenger CV space. This has resulted in making the passenger CV segment lucrative enough, thereby pulling in many operators in the business. The quality of road has immensely improved over a decade, as a result of which the average speed and hence the quantum of distance covered by passenger buses has increased significantly. People are preferring to travel in buses over trains, owing to at par ticket cost, high availability, reduced travel time and also improved level of comfort. Aligned to the market need and the trend, OEM's are offering buses with capable powertrains to cater the need of speed, reduced trip time as well as a lot of attention is also being paid to tune in the comfort level for long hauls. A big chunk of passenger travel is catered by the bus operators especially during major festivals in India.
The study aims to evaluate the lateral stability of tractor-front end loader system in consideration with difficult work conditions based on various loader bucket lifting heights from ground while driving a system on transversal slopes. In the proposed method the centre of gravity of tractor-front end loader system was calculated and analysed to evaluate the transversal overturning of the system. This overturning of the system was analysed by applying mathematical equations presented in past studies and compared with the newly developed prediction model for 3 test tractors of 25 HP. The excel spreadsheet comprised of mathematical equations used to calculate the Tractor Stability Index (TSI) on transverse slope with respect to loader bucket height and payload in dynamic condition. A criterion has been defined to categorize the Tractor Stability Index (TSI) poor to excellent on a scale of 0 to 4 where <0 being the very poor, 0-2 Poor, 2-4 Good and >4 being the excellent.
Ride Comfort forms a central design aspect for suspension and is to be considered as primary requirement for vehicle performance in terms of drivability and uptime of passenger. Maintaining a balance between ride comfort and handling poses a major challenge to finalize the suspension specifications. The objective of this project it to perform ride- comfort analysis for heavy commercial truck using MATLAB Simulink. First, bench-marking was carried out on a 4x2 heavy commercial truck and the physical parameters were obtained. Further, a mathematical model is developed using MATLAB Simulink R2015a and acceleration- time data is collected. An experimentation was carried out on the truck at speeds of 20 kmph, 30 kmph, 40 kmph and 50 kmph over a single hump to obtain actual acceleration time domain data. This is followed by running the vehicle on Class A, B & C road profiles-irrespective of vehicle speed- to account for random vibrations.
Internal combustion (IC) engines have been serving as prime source of power in tractors, since late 19th Century. Over this period, there have been significant improvements in IC engine technology leading to increased power density, reduction in tailpipe emissions and refinement in powertrain noise of tractors. As the regulations governing tailpipe emissions continue to be more stringent, original equipment manufacturers also have initiated work on innovative approaches such as diesel-electric hybrid powertrains to ensure compliance with new norms. However, introduction of such technologies may impact customer’s auditory, vibratory and drivability perceptions. Absence of conventional IC engine noise, association of electric whistle and whine, torque changes with activation/de-activation of motors and transmission behavior under transient conditions may result in new NVH issues in hybrid electric vehicles.
Objective : Objective of the paper is to acquaint the audience with the concept of electric vehicles, Powertrain components used in an electric bus, Siemens contribution to the field of Electromobility, Typical configurations used in an electric bus, challenges and current limitations, emerging Technologies, future, how to address the future charging infra requirement. Methodology : The subject shall be discussed with the audience through a presentation coupled with Explanation by the presenter. The topic shall be opened with the concept of electromobility followed By history of electromobility at Siemens, contribution to the field of electro mobility, typical configurations of electric vehicles, Advantages of electric vehicles vis a vis conventional diesel buses, typical configurations of an electric bus, feasibility of electric buses for various transport services. Comparison of induction motor Vs.
EMC challenges & solutions for Electric Buses Enoch Eapen, Devender Kumar and Madhusudan Joshi International Centre for Automotive Technology, Manesar Electric buses are talk of the town in India with Government pushing the implementation of E-mobility in general and for public transportation in particular. However due to high voltages and complex power electronics design, it often becomes difficult to deal with EMC related non-compliances. ICAT being largely experienced in the EMC testing and validation of E-buses, would like to present the various EMC challenges and the solutions related to E-buses. In this paper we would share three case studies where the EMC issues related to E-buses were mitigated by either introducing simple changes to the existing design or through large/small modification.
Downsizing is one of the crucial activities being performed by every automotive engineering organization. The main aim is to reduce – Weight, CO2 emissions and achieve cost benefit. All this is done without any compromise on performance requirement or rather with optimization of system performance. This paper evaluate one such optimization, where-in radiator assembly with two electric fan is targeted for downsizing for small commercial vehicle application. The present two fan radiator is redesigned with thinner core and use of single fan motor assembly. The performance of the heat exchanger is tested for similar conditions back to back on vehicle and optimized to get the balanced benefit in terms of weight, cooling performance and importantly cost. This all is done without any modification in vehicle interface components except electrical connector for fan. The side members and brackets design is also simplified to achieve maximum weight reduction.
Role of Wheel and underbody Aerodynamics of vehicle in the formation of drag forces is detrimental to the fuel (energy) consumption during the course of operation at high velocities. This paper deals with the CFD simulation of the flow around the wheels of a bus with different wheel housing geometry and pattern. Based on benchmarking a model of a bus is selected and analysis is performed. The aerodynamic drag coefficient is obtained and turbulence around wheels is observed using ANSYS Fluent CFD simulation for different combinations of wheel-housing- at the front wheels, at the rear wheels and both in the front and rear wheels. The drag force is recorded and corresponding influence on energy consumption on an Electric Bus is evaluated mathematically. A comparison is drawn between energy consumption of bus body without wheel housing and bus body with wheel housing. The result shows a significant reduction in drag coefficient and fuel consumption.
Child safety lock override mechanism - For Woman Safety Woman safety is a major concern in present world and the related laws ensure that government also cares for it. Mostly in public taxies, there is possibility for the driver to harass women occupant by activating the child safety lock without her knowledge. Purpose of child safety lock is to prevent child in the rear seat from opening the door and fall from vehicle. This will cause severe injury to the child. When child lock is ON, Inside Door handle becomes inoperative and the child cannot open the door. Only way to open door is through outside handle. But there is possibility for Taxi driver to kidnap the woman customer by enabling child safety lock, so that inside handle becomes inoperative and make her get trapped in car. To prevent such cases in future, Ministry of Road Transport ordered the manufacturers to delete child safety lock for all commercial vehicles.
Fuel economy is becoming one of the key parameter as it not only accounts for the profitability of commercial vehicle owner but also has impact on environment. Fuel economy gets affected from several parameters of engine such as Peak firing pressure, reduction in parasitic losses, improved volumetric efficiency, improved thermal efficiency etc. Compression ratio is one of key design criteria which affects most of the above mentioned parameters, which not only improve fuel efficiency but also results in improvement of emission levels. This paper evaluates the optimization of Compression ratio and study its effect on Engine performance. The parameters investigated in this paper include; combustion bowl volume in Piston and Cylinder head gasket thickness as these are major contributing factors affecting clearance volume and in turn the compression ratio of engine. Based on the calculation results, an optimum Compression Ratio for the engine is selected.
Tyre Traction Trailer is a device designed to find the Peak Brake co-efficient of C2 and C3 tyre as per ECE R117. The trailer is towed by the truck and is braked suddenly to evaluate braking co-efficient of specimen tyre. It is a single wheel trailer equipped with load cell to capture tire loads (Normal and longitudinal)while braking. Traction Trailer is modelled in MSC Adams and rigid body simulation is carried out for static stability of the system. Dynamic simulations were performed to understand locking of wheels during braking. Body frame was further modelled as flex body to perform structural analysis of the frame. The paper contains stress and deformation plots of trailer Structure under various loading conditions, change in Centre of gravity, weight transfer and forces on springs during braking and cornering, plots of tractive and normal load on tyre during braking.
The existing rule no. 62 of CMVR, 1989 applies to various commercial vehicles and yet is unable to provide a promising template to have a concise format which will cover all the motor vehicles and their different components with more precise equipment plus virtual testing along with proper management of time during the bulk inspection of all the vehicles. This paper will include all the technicalities and the different course of actions which must be taken into account for the proper implementation of the desired regulations on the designated concern. The idea behind this paper is to have a compact procedural document for the periodical inspection and maintenance of all the motor vehicles running on the Indian Roads that adhere to the basic safety concerns of other on-road vehicles, the pedestrians and the surroundings.
Keywords-Coolant,Ventilation Research and/or Engineering Questions/Objective: Number of Occupants is the major parameter when we consider Air Conditioning System. The number of person who stays in the room may vary in the same way the person who travels in the automobile also vary throughout the distance. This is more prevalent in transportation system like bus, train and where lot of people will travel together and where dropping station in the vehicle is too frequent.In this type,operating A.C has to be varied Methodology: . Instead the number count in the vehicle will be monitored from time to time. Based on the number of count, the cabin has to be cooled or heated and accordingly corresponding power has to be drawn by the compressor from the engine. This human count can be detected based on the number of CO2 sensor located in the cabin. the amount of fresh air that should be added to a cabin can be controlled by a carbon dioxide level transmitter.
Road and Engine borne noise are the most prominent sources of noise in any commercial vehicle. With advancement in technology and encouraging prospects in hybrid & electric vehicles, road noise can be set aside as the single most dominant source for vehicular NVH problems. In this paper, a full vehicle model is considered for complete NVH simulation with two acoustic and two structural response points. Random road excitations are applied at various vehicle speeds to determine the response characteristics. An elaborate study is conducted to understand the effects of vehicle speed and road conditions on the vehicle. An attempt is also successfully made to diagnose the effects of road excitations on the system behaviour by considering the suitable transfer functions. The methodology can be readily extended to any type of vehicle and speed as the excitations are independent of these parameters.
According to research study 45% of death cause due to not getting help on time to the injured person. Research has proven that if injured person is not found any option of help then they also loose the power to fight such critical situation due to psychological effect. When vehicle met accident, people are not getting on time support, this delay is the major cause of death in developing nations. Presently there is no any robust system available in market for passenger & commercial vehicles which helps to provide on time help to the injured persons & saves human life. In current situation low cost life saving device is need of our society. This paper deals with the design & development of the low cost-life saving device. This paper also comprises the scenario when any vehicle meet an accidents within certain speed limit then how the intelligent life saving device will work & save the life's.
Electric mobility is the future of tomorrows transport both in the public and private sector. One of the major challenges / issues faced by the electric vehicles is increased time duration of charging. Research classifies Electric Vehicle Charging into level 1, 2, 3 & DC fast charging. Slowest mode being level 1 which needs 120V / 15A, while Level 3 and fast DC charging are faster modes where in less time duration are required for battery charging. In this research a model of solar charging station was analysed for the Indian condition. Analysis indicate that Level 3 and fast DC charging are preferred where in commercial vehicles whereas Level one and 2 are suitable for vehicles that are used for limited periods. An analysis of solar energy as a source of power to charging stations is also made.
Ikshit Shrivastava1, Kiranpreet Singh2 1,2 International Centre for Automotive Technology (ICAT), Gurugram, India Introduction: Noise and Vibrations is a vast field of study and has been a constant challenge to Acousticians and designers. IC engines have been in existence since almost 125 years and have given enough room & time to acousticians and engineers to develop materials and tune powertrains to minimize Noise and Vibrations from vehicles. With the advent of technology to evolve alternate fueled powertrains to reduce emissions emitted by IC engines, lot of research is being carried out to develop powertrains particularly in the area of Hybrids & Electrics. Substantial investments are being made by OEMs worldwide on researching xEV domain to tap new motor/ battery technologies for vehicles. Since the technology in xEVs is majorly different, the problems associated with them are also different.
Future hybrid vehicles with advanced 48V electrified drive train technology to reduce CO2 emission. Chandrakant Palve* Pushkaraj Tilak * * Mercedes-Benz Research & Development India Pvt. Ltd. Bangalore. India. Key Words: 48V, CO2, P3 Hybrid, Electrified powertrain, AMT, emission, shift comfort, motor Research and/or Engineering Questions/Objective Global automotive industry is putting effort in moving from conventional powertrain technology to hybrid & electric powertrains. This efforts plays a vital role to achieve cleaner environment, improved performance, reduced fossil-fuel dependency, low noise for meeting regulatory & customer requirements. Automotive industry is facing a challenge of meeting stringent CO2 emission targets of 95g & 175g per kilometer for passenger cars & light commercial vehicles respectively. 48V is an important stepping stone in this direction.