Refine Your Search

Topic

Affiliation

Search Results

Training / Education

FEA Beyond Basics Nonlinear Analysis

2020-06-10
Finite Element Analysis (FEA) has been an indispensable tool for design simulation for several decades but this wide spread use has been limited to simple types of analyses. Relatively recently, more advanced analyses have given easy to use interfaces enabling design engineers to simulate problems formerly reserved for analysts. This three-session web seminar targets the FEA users who wish to explore those advanced analysis capabilities.
Training / Education

FEA Beyond Basics Thermal Analysis

2019-12-16
Finite Element Analysis (FEA) is a powerful and well recognized tool used in the analysis of heat transfer problems. However, FEA can only analyze solid bodies and, by necessity thermal analysis with FEA is limited to conductive heat transfer. The other two types of heat transfer: convection and radiation must by approximated by boundary conditions. Modeling all three mechanisms of heat transfer without arbitrary assumption requires a combined use of FEA and Computational Fluid Dynamics (CFD).
Training / Education

Weibull-Log Normal Analysis Workshop

2019-12-09
RMS (Reliability-Maintainability-Safety-Supportability) engineering is emerging as the newest discipline in product development due to new credible, accurate, quantitative methods. Weibull Analysis is foremost among these new tools. New and advanced Weibull techniques are a significant improvement over the original Weibull approach. This workshop, originally developed by Dr. Bob Abernethy, presents special methods developed for these data problems, such as Weibayes, with actual case studies in addition to the latest techniques in SuperSMITH® Weibull for risk forecasts with renewal and optimal component replacement.
Training / Education

Fundamentals of Geometric Dimensioning & Tolerancing (GD&T)

2019-12-09
Geometric dimensioning and tolerancing (GD&T) is used as a symbolic way of showing specific tolerances on drawings. GD&T is a valuable tool that effectively communicates the design intent to manufacturing and inspection. It is governed by the technical standard ASME Y14.5-2009. This course introduces participants to the GD&T system, providing a working knowledge of the correct interpretation and application of each symbol, general rules, the datum system, and 'bonus' tolerance and highlighting some of the changes in the updated Y14.5 standard. The material is reinforced with many practice exercises.
Training / Education

Managing Engineering & Technical Professionals

2019-12-09
In the fast paced and competitive environment of today's global economy, the work of technical professionals is often the difference between success and failure in an organization. Providing leadership for engineers is uniquely challenging, and the transition from working engineer to first-line technical supervisor is one of the most difficult career challenges that an engineer may face. First-time engineering supervisors and mid-level managers who wish to sharpen their skills and learn new techniques for guiding, coaching, and motivating working engineers, technicians, and designers will find this seminar valuable.
Training / Education

Performing a Cybersecurity Threat Analysis and Risk Assessment

2019-12-09
SAE J3061 sets out a recommended cybersecurity engineering process framework for organizations developing cyber physical systems. One of the recommendations of this framework is to carry out a threat analysis and risk assessment early in the product development. A threat analysis identifies and models the relevant threats against assets, and a risk assessment classifies the impact and likelihood associated with each threat. The approach enables the prioritization of risks and appropriate risk treatment measures to be determined in subsequent development phases.
Training / Education

Vibration Analysis Using Finite Element Analysis (FEA)

2019-12-02
Finite Element Analysis (FEA) has been used by engineers as a design tool in new product development since the early 1990's. Until recently, most FEA applications have been limited to static analysis due to the cost and complexity of advanced types of analyses. Progress in the commercial FEA software and in computing hardware has now made it practical to use advanced types as an everyday design tool of design engineers. In addition, competitive pressures and quality requirements demand a more in-depth understanding of product behavior under real life loading conditions.
Training / Education

Effective Writing for Engineering and Technical Professionals

2019-11-25
The ability to write concise and unambiguous reports, proposals, manuals, or other technical documents is a key skill for any high-functioning engineer or technical staff person in the mobility industries. Through a combination of class discussions, interactive workshop activities, assignments, checker teams (review teams) and job aids, this course delivers real-life technical writing techniques and tools that can be immediately applied. Attendees discover the importance of knowing their audiences and how to communicate technical information in a "user-friendly" style.
Training / Education

Side Impact Occupant Safety and CAE

2019-11-25
Side impact crashes account for approximately twenty-six percent of all motor vehicle fatal crashes, second only to frontal crashes, according to a report by the National Highway Transportation and Safety Administration (NHTSA). While car companies and suppliers continue to develop new technologies that make vehicles safer, NHTSA rolled out updated safety regulations (FMVSS 214) based on new research studies, making vehicle safety design more and more complex. This seminar is designed to familiarize participants with the engineering principles behind vehicle and restraint designs for occupant safety.
Technical Paper

Accelerated structural durability testing of backhoe loader by creation of duty cycle from field data to predict failure modes.

2019-11-21
2019-28-2583
These days backhoe loader have become main part of construction equipment vehicles. The main function of backhoe is to dig ditches to lay pipes and underground cable, set up foundations for buildings and create drainage systems. During these operations, many failures are observed in backhoe loader structure/parts. With the help of Accelerated structural durability testing, life of backhoe loader & its part can be estimated; through which we can understand different failure modes. The real time data was collected during various operations which includes pit digging, duck walk, ditch climbing, levelling, dozing, piling, truck loading etc. We have used software based approach to process the strain, displacement and other data collected during real time operation to create the duty cycle. The same duty cycle was simulated in the lab condition using servo hydraulic actuators.
Technical Paper

Structural Optimization based on Fatigue Analysis Results for increase in the payload capacity

2019-11-21
2019-28-2574
In commercial Vehicles industry, customer demands the vehicle with higher payload capacity. In order to achieve the higher payload, the vehicle weight must be reduced. Role of CAE (Computer Aided Engineering) team in the above objective is to provide optimized solution for the currently available designs. There are many capable softwares available in the market for the optimization. But performing optimization on the basis of static or dynamic analysis involves a little risk of design losing the strength. In our organization, we have developed a method, which will eliminate the risk of lower strength of the component. In this method, modified design from the optimization analysis has to undergo the fatigue analysis repetitively until it qualifies both the criteria of optimized design & adequate fatigue strength. In the above process fatigue analysis is time consuming process. To reduce the time taken by fatigue analysis, we are using the frequency based vibration fatigue method.
Technical Paper

Body Structure Strength Of Sleeper Coaches During Rollover Test As Per AIS 119

2019-11-21
2019-28-2567
Bus passenger safety has always been a concern considering various impacts like side impact, front impact, rollover etc. happening in real life scenarios. Various standards have been formulated for simulating these conditions and with respect to rollover, standards like ECE-R66 are being used to understand the superstructure strength. In India, we have AIS-052 (bus body code) and AIS-031 specific for bus rollover testing. AIS-119 has been published for rollover testing of sleeper coaches with modifications in the survival space creation in sleeper coaches for berths. With physical testing being more expensive, CAE simulations are being considered as vital option which also helps in design modification in a lesser time. This paper discusses the scope of numerical simulation of sleeper coach rollover using an explicit dynamic solver RADIOSS to understand the structure deformations, survival space clearances/intrusions.
Technical Paper

Passenger "Sleeper Bus" Structure, an Optimization Study using Finite Element Analysis

2019-11-21
2019-28-2537
Sleeper buses are increasingly used as connectivity between cities and remote areas with sleeping comfort for passengers. During the normal operation, the bus body is subjected to several loads, external loads from the road (i.e. crossing over a speed bump, breaking & cornering). Moreover, there is a substantial possibility that these loads may lead to a structural failure. Hence, it is necessary to determine stresses occurred in the bus body to ensure its integrity under these driving scenarios. During the accident, rollover/front/rear/side impact, energy absorbing capacity of bus body structure is crucial for safety of passengers. The objective of this study is to reduce weight of bus structure while maintaining cost & safety as constraint. 3D Model prepared in NX and finite element model created in hypermesh ,LS-dyna/optistruct used as solver and post processing done in hyperview. In this study, fully loaded bus with passengers as well as maximum language mass, considered.
Technical Paper

A Philosophy of Full Vehicle Simulation for analysing the Road NVH Problems

2019-11-21
2019-28-2491
Road and Engine borne noise are the most prominent sources of noise in any commercial vehicle. With advancement in technology and encouraging prospects in hybrid & electric vehicles, road noise can be set aside as the single most dominant source for vehicular NVH problems. In this paper, a full vehicle model is considered for complete NVH simulation with two acoustic and two structural response points. Random road excitations are applied at various vehicle speeds to determine the response characteristics. An elaborate study is conducted to understand the effects of vehicle speed and road conditions on the vehicle. An attempt is also successfully made to diagnose the effects of road excitations on the system behaviour by considering the suitable transfer functions. The methodology can be readily extended to any type of vehicle and speed as the excitations are independent of these parameters.
Technical Paper

Impact of wheel-housing on aerodynamic drag and effect on energy consumption on an electric bus body

2019-11-21
2019-28-2394
Role of Wheel and underbody Aerodynamics of vehicle in the formation of drag forces is detrimental to the fuel (energy) consumption during the course of operation at high velocities. This paper deals with the CFD simulation of the flow around the wheels of a bus with different wheel housing arrangements. Based on benchmarking, a model of a bus is selected and analysis is performed. The aerodynamic drag coefficient is obtained and turbulence around wheels is observed using ANSYS Fluent CFD simulation for different combinations of wheel-housing- at the front wheels, at the rear wheels and both in the front and rear wheels. The drag force is recorded and corresponding influence on energy consumption of a Bus is evaluated mathematically. A comparison is drawn between energy consumption of bus body without wheel housing and bus body with wheel housing. The result shows a significant reduction in drag coefficient and fuel consumption.
Technical Paper

Replacing twin electric fan radiator with Single fan radiator

2019-11-21
2019-28-2381
Downsizing is one of the crucial activities being performed by every automotive engineering organization. The main aim is to reduce – Weight, CO2 emissions and achieve cost benefit. All this is done without any compromise on performance requirement or rather with optimization of system performance. This paper evaluate one such optimization, where-in radiator assembly with two electric fan is targeted for downsizing for small commercial vehicle application. The present two fan radiator is redesigned with thinner core and use of single fan motor assembly. The performance of the heat exchanger is tested for similar conditions back to back on vehicle and optimized to get the balanced benefit in terms of weight, cooling performance and importantly cost. This all is done without any modification in vehicle interface components except electrical connector for fan. The side members and brackets design is also simplified to achieve maximum weight reduction.
Technical Paper

Ride- Comfort Analysis for Commercial Truck using MATLAB Simulink.

2019-11-21
2019-28-2428
Ride Comfort forms a core design aspect for suspension and is to be considered as primary requirement for vehicle performance in terms of drivability and uptime of passenger. Maintaining a balance between ride comfort and handling poses a major challenge to finalize the suspension specifications. The objective of this project it to perform ride- comfort analysis for a commercial truck using MATLAB Simulink. First, benchmarking was carried out on a 4x2 commercial truck and the physical parameters were obtained. Further, a mathematical model is developed using MATLAB Simulink R2015a and acceleration- time data is collected. An experimentation was carried out on the truck at speeds of 20 kmph, 30 kmph, 40 kmph and 50 kmph over a single hump to obtain actual acceleration time domain data. The model is then correlated with actual test over a single hump. This is followed by running the vehicle on Class A, B & C road profiles to account for random vibrations.
Technical Paper

Inspection and Maintenance of In-Use Motor Vehicles – Mitigating Environmental impact

2019-11-21
2019-28-2427
The existing rule no. 62 of CMVR, 1989 applies to various commercial vehicles and yet is unable to provide a promising template to have a concise format which will cover all the motor vehicles and their different components with more precise equipment plus virtual testing along with proper management of time during the bulk inspection of all the vehicles. This paper will include all the technicalities and the different course of actions which must be taken into account for the proper implementation of the desired regulations on the designated concern. The idea behind this paper is to have a compact procedural document for the periodical inspection and maintenance of all the motor vehicles running on the Indian Roads that adhere to the basic safety concerns of other on-road vehicles, the pedestrians and the surroundings.
Technical Paper

Occupant Controlled Ventilation

2019-11-21
2019-28-2461
Keywords-Coolant,Ventilation Research and/or Engineering Questions/Objective: Number of Occupants is the major parameter when we consider Air Conditioning System. The number of person who stays in the room may vary in the same way the person who travels in the automobile also vary throughout the distance. This is more prevalent in transportation system like bus, train and where lot of people will travel together and where dropping station in the vehicle is too frequent.In this type,operating A.C has to be varied Methodology: . Instead the number count in the vehicle will be monitored from time to time. Based on the number of count, the cabin has to be cooled or heated and accordingly corresponding power has to be drawn by the compressor from the engine. This human count can be detected based on the number of CO2 sensor located in the cabin. the amount of fresh air that should be added to a cabin can be controlled by a carbon dioxide level transmitter.
Technical Paper

Multi body dynamic simulation of tyre traction trailer

2019-11-21
2019-28-2430
Tyre Traction Trailer is a device designed to find the Peak Brake co-efficient of C2 and C3 tyre as per ECE R117. The trailer is towed by the truck and is braked suddenly to evaluate braking co-efficient of specimen tyre. It is a single wheel trailer equipped with load cell to capture tire loads (Normal and longitudinal)while braking. Traction Trailer is modelled in MSC Adams and rigid body simulation is carried out for static stability of the system. Dynamic simulations were performed to understand locking of wheels during braking. Body frame was further modelled as flex body to perform structural analysis of the frame. The paper contains stress and deformation plots of trailer Structure under various loading conditions, change in Centre of gravity, weight transfer and forces on springs during braking and cornering, plots of tractive and normal load on tyre during braking.
X