Refine Your Search

Topic

Search Results

Training / Education

A Primer on Regulations and Liability Considerations for HAV’s

2020-06-18
Potential regulations surrounding the development, testing and commercial launch of Highly Automated Vehicles and possible liability exposure for the manufacturing and operation of Highly Automated Vehicles are fluid and changing areas, that will continue to evolve over the next several years. The first half of this course reviews where regulations are at the state and federal levels, what actions are currently under consideration, how current regulations will need to change to accommodate HAV’s, and how and when new regulations might be implemented. The second half covers both common law and strict liability and how it may apply to HAV’s.
Training / Education

AS9145 Requirements for Advanced Product Quality Planning and Production Part Approval

2020-05-05
Production and continual improvement of safe and reliable products is key in the aviation, space and defense industries. Customer and regulatory requirements must not only be met, but they are typically expected to exceeded requirements. Due to globalization, the supply chain of this industry has been expanded to countries which were not part of it in the past and has complicated the achievement of requirements compliance and customer satisfaction. The IAQG has established and deployed the AS9145 Standard, as a step to help achieve these objectives.
Training / Education

AS13000 Problem Solving Requirements for Suppliers

2020-05-04
AS13000 defines the Problem-Solving standard for suppliers within the aero-engine sector, with the Eight Disciplines (8D) problem solving method the basis for this standard. This two-day course provides attendees with a comprehensive and standardized set of tools to become an 8D practitioner and meets all the requirements of the training syllabus in AS13000. Successful application of 8D achieves robust corrective and preventive actions to reduce the risk of repeat occurrences and minimize the cost of poor quality.
Training / Education

Aircraft Virtual Flight Testing and Certification in Off-nominal Multifactorial Situations

2020-04-13
The behavior of a 'pilot-automaton-aircraft-operating environment' system (the System) in off-nominal situations with multiple risks can be unpredictably dangerous. Most multifactorial flight scenarios (corner cases) are considered as theoretically improbable. Such anomalies do nonetheless occur in operations and can lead to inconceivable accidents - 'black swan' events.
Training / Education

AS13003 Measurement System Analysis (MSA) Requirements for Aerospace Engine Supplier Quality

2020-04-08
AS 13003:2015 stipulates requirements to establish an acceptable measurement system (for variable and attribute features) for use on aerospace engines parts and assemblies.  Measurement Systems Analysis (MSA) is used to evaluate and improve measurement systems in the workplace because it evaluates the test method, measuring instruments, and the process of acquiring measurements. The Aerospace Engine Supplier Quality (AESQ) Strategy Group published AS13003 to define the minimum requirements for conducting MSA for variable attribute assessment on characteristics as defined on the drawing specification.
Training / Education

AS13002 Qualifying an Alternate Inspection Frequency Plan

2020-04-06
AS13002 defines the process for qualifying an Alternate Inspection Frequency Plan for suppliers within the aero-engine sector.  This two-day course will provide common requirements for developing and qualifying an alternate inspection plan, other than 100% inspection of all features.  This course is designed to cover the basic elements of the process to be applied to design characteristics (as defined in AS9102), and parts or inspection processes as defined by the purchaser.
Training / Education

Fundamentals of GD&T 2018 3-day

2020-03-31
This course teaches the terms, rules, symbols, and concepts of GD&T as prescribed in the ASME Y14.5-2018 Standard. This course offers an in-depth explanation of geometric tolerancing symbols, their tolerance zones, applicable modifiers, common applications, and verification principles. The class includes a comparison of GD&T to the directly toleranced dimensioning method; Rules #1 and #2; form and orientation controls; tolerance of position; runout and profile controls. Newly acquired learning is reinforced throughout the class with more than 150 practice problems.  
Training / Education

Navigating Requirements for International Certification of Aviation Products

2020-03-16
This course describes the basic elements of the process for achieving a successful aircraft certification globally once certification by the State of Design has been accomplished. The regulatory framework established under ICAO is presented with discussion of how major countries around the world comply with the ICAO Standards and Recommended Practices (SARPs). The uncertainty of how each country performs validation is a challenge. This course identifies common validation practices and key bilateral agreements which facilitate acceptance of aviation products from one country to another.
Training / Education

Human Systems Integration and SAE6906

2020-03-16
This course introduces Human Systems Integration (HSI) and the new SAE International HSI best practice standard (SAE6906). DoD and other customers currently require HSI program plans in accordance with Department of Defense Data Item Description (DID) DI-HFAC-81743A. It is assumed that, for future system acquisition programs, customers (especially DoD) will require establishment and execution of a Human Systems Integration Program in compliance with SAE Systems Management Standard SAE6906. This course will assist students with planning and executing HSI program that are consistent with the DoD DID and SAE Standard 6906. 
Training / Education

ISO 14001:2015 Lead Auditor Training

Anytime
ISO 14001:2015 is an environmental management standard (EMS) developed by the International Organization for Standardization (ISO). It’s a generic standard that can be used for any organization that provides physical products or services. ISO 14001 is the most widely used EMS because it’s both business and management oriented. However, the requirements must be carefully interpreted to make sense within a particular organization. For example, the environmental impact of developing automotive products is not the same as producing food products or offering consulting services, yet this standard can be applied to any of these activities.
Training / Education

FAA/EASA Certification, Methods of Compliance for 29.865 External Loads

Certifying an aircraft, part or appliance can be challenge.  The FAA/EASA procedures can be frustrating and a maze of rules, policy and guidance. Understanding the process and procedures can provide you with a competitive edge and reduce your time obtaining a Certification approval. This course provides an overview of the Federal Aviation Administration (FAA) and European Aviation Safety Agency (EASA) policies, guidelines and requirements leading to Type and Supplemental Type airworthiness approvals. This course has a focus on 29.865 External loads to include hoists, belly-mounted external structure and cargo hook loads
Training / Education

FAA/EASA Certification, Methods of Compliance for 29.801 Ditching

Certifying an aircraft, part or appliance can be a challenge.  The FAA/EASA procedures can be frustrating and a maze of rules, policy and guidance. Understanding the process and procedures can provide you with a competitive edge and reduce your time obtaining a Certification approval. This course provides an overview of the Federal Aviation Administration (FAA) and European Aviation Safety Agency (EASA) policies, guidelines and requirements leading to Type and Supplemental Type airworthiness approvals. This course has a focus on 29.801 Ditching and EASA 29.802 Emergency Flotation.
Standard

Fuze Well Mechanical Interface

2019-09-03
CURRENT
AS5680B
This interface standard applies to fuzes used in airborne weapons that use a 3-in fuze well. It defines: Physical envelope of the fuze well at the interface with the fuze. Load bearing surfaces of the fuze well. Physical envelope of the fuze and its connector. Mechanical features (e.g., clocking feature). Connector type, size, location and orientation. Retaining ring and its mechanical features (e.g., thread, tool interface). Physical envelope of the retaining ring at the interface with the fuze. Physical space available for installation tools. Torque that the installation tool shall be capable of providing. This standard does not address: Materials used or their properties. Protective finish. Physical environment of the weapon. Explosive interface or features (e.g., insensitive munitions (IM) mitigation). Charging tube. Torque on the retaining ring or loads on the load bearing surfaces.
Video

Career Counselor - Conflict Management teaser

2019-07-18
Learn about the main reasons why conflict in the workplace occurs and how to manage it in the newest segment of the Career Counselor video series. SAE Members can view the full version by logging into the Member Connection. Not a Member? Join us today at sae.org/join.
Standard

S400 Copper Media Interface Characteristics Over Extended Distances

2019-07-09
CURRENT
AS5643/1A
This SAE Aerospace Standard (AS) establishes guidelines for the use of IEEE-1394-2008 Beta (formerly IEEE-1394b) as a data bus network in military and aerospace vehicles. It encompasses the data bus cable and its interface electronics for a system utilizing S400 over copper medium over extended lengths. This document contains extensions/restrictions to “off-the-shelf” IEEE-1394 standards, and assumes that the reader already has a working knowledge of IEEE-1394. This document does not identify specific environmental requirements (electromagnetic compatibility, temperature, vibration, etc.); such requirements will be vehicle-specific and even LRU-specific. However, the hardware requirements and examples contained herein do address many of the environmental conditions that military and aerospace vehicles may experience. One should refer to the appropriate sections of MIL-STD-461E for their particular LRU, and utilize handbooks such as MIL-HDBK-454A and MIL-HDBK-5400 for guidance.
X