Refine Your Search

Topic

Search Results

Viewing 1 to 14 of 14
Standard

Function Performance Status Classification for EMC Immunity Testing

2018-09-13
CURRENT
J1812_201809
This SAE Standard provides a general method for defining the acceptable function performance status classification for the functions of automotive electronic devices upon application of the test conditions specified as described in appropriate EMC immunity test standards (for example, SAE J1113 and SAE J551). Testing of devices could be performed either on or off vehicles. Appropriate test signal and methods, Function Performance status, and test signal severity level would have to be specified in the individual cases.
Standard

Measurement of Radiated Emissions from Integrated Circuits—TEM/Wideband TEM (GTEM) Cell Method; TEM Cell (150 kHz to 1 GHz), Wideband TEM Cell (150 kHz to 8 GHz)

2017-09-22
CURRENT
J1752/3_201709
This measurement procedure defines a method for measuring the electromagnetic radiation from an integrated circuit (IC). The IC being evaluated is mounted on an IC test printed circuit board (PCB) that is clamped to a mating port (referred to as a wall port) cut in the top or bottom of a TEM or wideband TEM (GTEM) cell. The test board is not in the cell as in the conventional usage but becomes a part of the cell wall. This method is applicable to any TEM or GTEM cell modified to incorporate the wall port; however, the measured RF voltage is affected by the septum to test board (wall) spacing. This procedure was developed using a 1 GHz TEM cell with a septum to wall spacing of 45 mm and a GTEM cell with average septum to wall spacing of 45 mm over the port area. Other cells may not produce identical spectral output but may be used for comparative measurements, subject to their frequency and sensitivity limitations.
Standard

Function Performance Status Classification for EMC Immunity Testing

2013-06-12
HISTORICAL
J1812_201306
This SAE Standard provides a general method for defining the acceptable function performance status classification for the functions of automotive electronic devices upon application of the test conditions specified as described in appropriate EMC immunity test standards (for example, SAE J1113 and SAE J551). Testing of devices could be performed either on or off vehicles. Appropriate test signal and methods, Function Performance status, and test signal severity level would have to be specified in the individual cases.
Standard

Measurement of Radiated Emissions from Integrated Circuits—TEM/Wideband TEM (GTEM) Cell Method; TEM Cell (150 kHz to 1 GHz), Wideband TEM Cell (150 kHz to 8 GHz)

2011-06-17
HISTORICAL
J1752/3_201106
This measurement procedure defines a method for measuring the electromagnetic radiation from an integrated circuit (IC). The IC being evaluated is mounted on an IC test printed circuit board (PCB) that is clamped to a mating port (referred to as a wall port) cut in the top or bottom of a TEM or wideband TEM (GTEM) cell. The test board is not in the cell as in the conventional usage but becomes a part of the cell wall. This method is applicable to any TEM or GTEM cell modified to incorporate the wall port; however, the measured RF voltage is affected by the septum to test board (wall) spacing. This procedure was developed using a 1 GHz TEM cell with a septum to wall spacing of 45 mm and a GTEM cell with average septum to wall spacing of 45 mm over the port area. Other cells may not produce identical spectral output but may be used for comparative measurements, subject to their frequency and sensitivity limitations.
Standard

Function Performance Status Classification for EMC Immunity Testing

2007-05-14
HISTORICAL
J1812_200705
This SAE Standard provides a general method for defining the acceptable function performance status classification for the functions of automotive electronic devices upon application of the test conditions specified as described in appropriate EMC immunity test standards (for example, SAE J1113 and SAE J551). Testing of devices could be performed either on or off vehicles. Appropriate test signal and methods, Function Performance status, and test signal severity level would have to be specified in the individual cases.
Standard

Limits and Methods of Measurement of Radio Disturbance Characteristics of Components and Modules for the Protection of Receivers Used On Board Vehicles

2006-09-29
CURRENT
J1113/41_200609
This SAE Standard contains limits1 and procedures for the measurement of radio disturbances in the frequency range of 150 kHz to 1000 MHz. The standard applies to any electronic/electrical component intended for use in vehicles and large devices. Refer to International Telecommunications Union (ITU) Publications for details of frequency allocations. The limits are intended to provide protection for receivers installed in a vehicle from disturbances produced by components/modules in the same vehicle.2 The receiver types to be protected are: sound and television receivers3, land mobile radio, radio telephone, amateur and citizens' radio. For the purpose of this document, a vehicle is a machine which is self-propelled. Vehicles include (but are not limited to) passenger cars, trucks, agricultural tractors, and snowmobiles. The limits in this document are recommended and subject to modification as agreed between the vehicle manufacturer and the component supplier.
Standard

Function Performance Status Classification for EMC Immunity Testing

2003-10-21
HISTORICAL
J1812_200310
This SAE Standard provides a general method for defining the function performance status classification for the functions of automotive electronic devices upon application of the test conditions specified as described in appropriate EMC test standards (for example, SAE J1113 & SAE J551). Testing of devices could be performed either on or off vehicles. Appropriate test signal and methods, Function Performance status, and test signal severity level would have to be specified in the individual cases.
Standard

FUNCTION PERFORMANCE STATUS CLASSIFICATION FOR EMC IMMUNITY TESTING

1996-10-01
HISTORICAL
J1812_199610
This SAE Standard provides a general method for defining the function performance status classification for the functions of automotive electronic devices upon application of the test conditions specified as described in appropriate EMC test standards (for example, the SAE J1113 series and the SAE J551 series). Testing of devices could be performed either on or off vehicles. Appropriate test signal and methods, region of performance, and test signal severity level would have to be specified in the individual cases.
Standard

FUNCTION PERFORMANCE STATUS CLASSIFICATION FOR EMC IMMUNITY TESTING

1995-07-01
HISTORICAL
J1812_199507
This SAE Recommended Practice provides a general method for defining the function performance status classification for the functions of automotive electronic devices upon application of the test conditions specified as described in appropriate EMC test standards (for example, the SAE J1113 series and the SAE J551 series). Testing of devices could be performed either on or off vehicles. Appropriate test signal and methods, region of performance, and test signal severity level would have to be specified in the individual cases.
Standard

PERFORMANCE LEVELS AND METHODS OF MEASUREMENT OF ELECTROMAGNETIC RADIATION FROM VEHICLES AND DEVICES (30 to 1000 MHz)

1990-03-15
HISTORICAL
J551_199003
This SAE Standard covers the measurement of broadband electromagnetic radiation over the frequency range of 30 to 1000 MHz from a vehicle or other device powered by an internal combustion engine or electric motor. Operation of all engines (main and auxiliary) of a vehicle or device is included. All equipment normally operating when the engine is running is also included except operator-controlled equipment, which is excluded. The recommended level applies only to complete vehicles or devices in their final manufactured form. Vehicle mounted rectifiers used for battery charging in electric vehicles are included in this document when operated in their charging mode.
Standard

FUNCTION PERFORMANCE STATUS CLASSIFICATION FOR EMC SUSCEPTIBILITY TESTING OF AUTOMOTIVE ELECTRONIC AND ELECTRICAL DEVICES

1988-10-01
HISTORICAL
J1812_198810
The process described in this document is generally applicable to provide a means to classify the function performance status of automotive electronic devices. Testing of devices could be performed either on or off vehicles. Appropriate test pulse and methods, functional status classification, region of performance, and test pulse severity level would have to be specified in the individual cases.
Standard

ANECHOIC TEST FACILITY RADIATED SUSCEPTIBILITY 20 MHz TO 18 GHz ELECTROMAGNETIC FIELD

1987-01-01
HISTORICAL
J1507_198701
This information report gives typical requirements for an anechoic chamber in which the system susceptibility of an operating motor vehicle to electromagnetic fields can be determined in the frequency range of 20 MHz to 18 GHz. Because of the large cone sizes required for 20 MHz cut-off, several anechoic facilities have been designed with lower cut-off frequencies of 200 MHz or greater. Testing below cut-off is then accomplished using customized antennas at reduced accuracy. Users should carefully review their testing requirements before undertaking the construction of a test facility the magnitude of an anechoic chamber. Other test approaches include, but are not limited to, open field testing per SAE J1338 and mode stirred reverberation chambers.
Standard

PERFORMANCE LEVELS AND METHODS OF MEASUREMENT OF ELECTROMAGNETIC RADIATION FROM VEHICLES AND DEVICES (20–1000 MHz)

1981-06-01
HISTORICAL
J551_198106
This SAE Standard covers the measurement of Impulse Electric Field Strength radiated over the frequency range of 20–1000 MHz from a vehicle or other device powered by an internal combustion engine or electric motor. Operation of all engines (main and auxiliary) on a vehicle or other device is included. All equipment normally operating when the engine is running is also included, except operator-controlled equipment, which is excluded. The recommended level applies only to complete vehicles or devices in their final manufactured form. Vehicle mounted rectifiers used for battery charging in electric vehicles are included in this specification when operated in their charging mode.
Standard

MEASUREMENT OF ELECTROMAGNETIC RADIATION FROM A MOTOR VEHICLE OR OTHER INTERNAL-COMBUSTION-POWERED DEVICE (EXCLUDING AIRCRAFT) (20-1000 MHz)

1974-02-01
HISTORICAL
J551C_197402
This standard covers the measurement of electromagnetic radiation from a motor vehicle or other internal-combustion-powered device (excluding aircraft) over a frequency range of 20-1000 MHz. In the case of motor vehicle sources, auxiliary engines mounted on the vehicle are included and short-duty cycle equipment (such as starting motors, window regulators, turn signals, flashing warning lights, etc.) are excluded.
X