Engine failures can occur in a variety of equipment, vehicles, and applications. On occasion, a single vehicle type or equipment family will even experience multiple engine failures leading to the inevitable need to determine what the most likely cause of one or all of those failures was. This comprehensive seminar introduces participants to the methods and techniques used to understand the types of variables and inputs that can affect engine reliability and then determine the most likely cause of an individual engine or group of engine failures in the field.
Hybridization continues to be growing trend in vehicular applications. Current study shows a holistic system approach for the design & integration of the powertrain in Off-Highway tractor applications. It includes study & benchmarking of system architecture of an all-electric and diesel-electric drive systems as per application requirement. Further comprehensive study was done on functional components for an electric powertrain, which includes electric drives, batteries & controllers. Selection & design of these components was studied & component selection approach was developed for typical Off-Highway tractor application. Current study was divided into three parts. 1.Study of different Off-Highway tractor applications & selection of all-electric, series & parallel hybrid architectures as per application requirement.
Since the 20th century increase in the number of cars in the major cities is been a point of concern because of the toxic gasses being emitted from the engine of an automobile. These gasses are polluting the atmosphere and degrading the air to breathe. The main gasses responsible for the degradation of air quality are carbon monoxide, hydrocarbon and oxides of nitrogen. There is a necessity to find ways to reduce the pollution emitted into the atmosphere from the automobile. The source of emission is either evaporation from fuel tank or carburetor which is easy to be dealt with or harmful gasses due to improper combustion which is a concern for the environment. The two ways to reduce these emissions are, modification in the engine to minimize the production of harmful gases and to treat the harmful gasses emitted from the engine before blowing it into the atmosphere from the exhaust. Catalysts help to break harmful gasses into smaller compounds that are environment-friendly.
Biodiesel can supplement petroleum product as a "perfect vitality source". It can ensure nature by diminishing CO2, SO2, CO, HC emission to an extent. The carbon cycle of Biodiesel is dynamic through the photosynthesis procedure .Plants ingest CO2, or, in other words those released by the biodiesel ignition process. Utilizing biodiesel can all the more adequately lessen the outflow of CO2, secure the indigenous habitat and keep up the environmental equalization, contrasted with the utilization of petroleum product. This paper considers the issues and gives understanding on the utilization of bio diesel in existing passenger vehicles which runs on diesel as a fuel. Because of increment in use of non-renewable energy sources viz., petroleum products are on an exponential decline. Today we have an option of electric vehicle or fuel cell based vehicles but what about the existing infrastructures of Billions of vehicles plying on Indian road. Bio diesel as a fuel solves this issue.
Keywords-Coolant,Ventilation Research and/or Engineering Questions/Objective: Number of Occupants is the major parameter when we consider Air Conditioning System. The number of person who stays in the room may vary in the same way the person who travels in the automobile also vary throughout the distance. This is more prevalent in transportation system like bus, train and where lot of people will travel together and where dropping station in the vehicle is too frequent.In this type,operating A.C has to be varied Methodology: . Instead the number count in the vehicle will be monitored from time to time. Based on the number of count, the cabin has to be cooled or heated and accordingly corresponding power has to be drawn by the compressor from the engine. This human count can be detected based on the number of CO2 sensor located in the cabin. the amount of fresh air that should be added to a cabin can be controlled by a carbon dioxide level transmitter.
Energy policy reviews state that automobiles contribute 25% of the total Carbon-di-oxide (CO2) emission. The current trend in emission control techniques of automobile exhaust is to reduce CO2 emission. We know that CO2 is a greenhouse gas and it leads to global warming. Conversion of CO2 into carbon and oxygen is a difficult and energy consuming process when compared to the catalytic action of catalytic converters on CO, HC and NOX. The best way to reduce it is to capture it from the source, store it and use it for industry applications. To physically capture the CO2 from the engine exhaust, adsorbents like molecular sieves are utilized. When compared to other methods of CO2 separation, adsorption technique consumes less energy and the sieves can be regenerated, reused and recycled once it is completely saturated. In this research work, zeolite X13 was chosen as a molecular sieve to adsorb CO2 from the exhaust.
Research and/or Engineering Questions/Objective Plastic automotive fuel tanks made up of blow molded, multi-layered, high-density polyethylene (HDPE) material can take complex shapes with varying thickness. Accidental drop of fuel tank from a height during handling can lead to development of cracks. Damage can also occur due to an impact during a crash. This can be catastrophic due to flammability of the fuel. The objective of this work is to characterize and develop a failure model for the fuel tank material to simulate damage and enhance predictive capability of CAE for chassis and safety load cases. Methodology Different aspects were considered to develop a characterization and modelling strategy for the HDPE fuel tank. Material properties can be influenced by factors such as, service temperature, rate of deformation, state of stress etc.
Plastics are prone to photo oxidative and thermal oxidative degradation under usage conditions due to their chemical nature. From sustainability and cost standpoint, there is an increasing focus on Mold-In-Color (MIC) plastic materials. Simultaneously customer’s expectations on the perceived quality of these MIC parts has been increasing with attractive color and glossy appearance. A study was conducted to analyze the product quality and durability aspects over a prolonged exposure to accelerated weathering condition. Material selected for this study were injection molded specimens of ABS and PC/ABS used in automotive passenger vehicles.
Fuel economy is becoming one of the key parameter as it not only accounts for the profitability of commercial vehicle owner but also has impact on environment. Fuel economy gets affected from several parameters of engine such as Peak firing pressure, reduction in parasitic losses, improved volumetric efficiency, improved thermal efficiency etc. Compression ratio is one of key design criteria which affects most of the above mentioned parameters, which not only improve fuel efficiency but also results in improvement of emission levels. This paper evaluates the optimization of Compression ratio and study its effect on Engine performance. The parameters investigated in this paper include; combustion bowl volume in Piston and Cylinder head gasket thickness as these are major contributing factors affecting clearance volume and in turn the compression ratio of engine. Based on the calculation results, an optimum Compression Ratio for the engine is selected.
Butanol is an attractive alternative fuel to fuel diesel engine. Waste engine oil is causing land pollution and contamination to groundwater a lot. This experimental study is to investigate the performance of treated waste engine oil and butanol as fuel to diesel engine operated under optimal engine operating parameters. This study was conducted in four stages: Treating the waste engine oil; Preparation of blends and testing the properties; Arriving at an optimal injection timing, nozzle opening pressure, compression ratio, and intake air temperature to suit the possible blend of treated waste engine oil and butanol; Testing the possible blend under optimal operating parameters under various load conditions. The properties test indicated that 35% of butanol can be blended with treated engine oil with respect to the essential properties for fueling diesel engine. To optimize the parameters L16 orthogonal array with the Taguchi method was used.
Currently Automotive industry is looking for sustainable alternate of Conventional fuels. Bio diesel is an alternative fuel similar to conventional or ‘fossil’ diesel. It is produced from vegetable oil, animal fats, tallow and waste cooking oil. Bio diesel is one of the most promising fuel which can not only replace the conventional fuels but also environment friendly in terms of Greenhouse gases emission. Bio diesel can be produced from various sources and can be sustainable fuel for automotive vehicles. In this paper, efforts have been taken to convert existing Diesel engine into Bio diesel compliant engine. For making suitable for Biodiesel operation, modification in Engine Fuel system, filter and Sealing were carried out. Further Engine performance and emission testing were done and results were compared with performance and emission of same configuration Diesel engine.
Bio diesel is one of the most promising fuel which can not only replace the conventional fuels but also environment friendly in terms of Greenhouse gases emission. Adaptation of Bio diesel comes with reduced maintainability and high maintenance cost. Blends of biodiesel and conventional diesel are most commonly used in automotive diesel engines. Biodiesel is most popular choice as an alternate fuel of fossil diesel due to its easy availability, eco-friendly nature and minimum change in existing diesel engine for retro fitment. In this paper efforts have been taken to optimize the life of Fuel filter for bio diesel application. For improving Fuel filter life, modifications carried out in Fuel filter media, size and configuration. Further, Fuel filter tested on Engine test bed and Vehicle to establish the life of filter in real world usage condition. Testing Results were compared with existing diesel fuel filter.
A Vibration analysis is about the art of looking for changes in the vibration pattern and then relating those changes. Vibration generates from Excitation forces due to firing, structural properties like stiffness of the engine and dynamic response. The unbalance masses percentage variation will effect on increasing in Vibration of the diesel engine with respect to Change in Speed. Inherent vibration in engine cause due to combustion is depend upon various crank mechanism, fuel or air flow, gear wheels ,unbalanced turbocharger,etc.. Individual balancing of parts and its combined effect after assembly will totally change the scenario of vibration .Shifting of vibration pattern from Lateral to Vertical plays significant role in this. Changing an eccentric mass direction gives harmonic impact in vibration. Changes in acceleration/displacement pattern with different percentage of balancing.
The fuel consumption and performance of the Internal Combustion engine is improved by adopting concepts of an adiabatic engine. An experimental investigation for different load conditions is carried out on a water-cooled, constant-speed, twin-cylinder diesel engine. This research is intended to emphasize energy balance and emission characteristic for standard uncoated base engine and adiabatic engine. The inner walls of diesel engine combustion chamber are thermally insulated by a top coat of Metco 204NS yttria-stabilized zirconia (Y2O3ZrO2) powder (YSZ) of a thickness of 350 mm using plasma spray coating technology. The same combustion chamber is also coated with TBC bond coats of AMDRY 962 Nickle chromium aluminum yttria of thickness of 150 mm. The NiCrAlY powder specially designed to produce coating’s resistance to hot corrosion.
In order to reduce engine development timing and cost, a numerical calculation used to evaluate valve train systems. This paper discusses the work done on kinematic and dynamic analysis of Valve Train (VT) system of a diesel engine by using 1-D Ricardo Valdyn software. The goal is to meet optimum intake, exhaust valve timing requirement, maximize valve open area and 20% overspeed requirement. Valve train model is prepared and inputs like mass and stiffness are estimated from actual weighing and finite element approach respectively. Simulation model is used for predicting valve bounce speed, valve displacement, cam-follower contact stress and strain in the rocker arm. Initially, Kinematic analysis is carried out to study the change in valve motion characteristics such as cam contour radius, tappet contact eccentricity etc. Further to this, dynamic analysis is carried out to assess forces and stresses on valve train components.