Future hybrid vehicles with advanced 48V electrified drive train technology to reduce CO2 emission. Chandrakant Palve* Pushkaraj Tilak * * Mercedes-Benz Research & Development India Pvt. Ltd. Bangalore. India. Key Words: 48V, CO2, P3 Hybrid, Electrified powertrain, AMT, emission, shift comfort, motor Research and/or Engineering Questions/Objective Global automotive industry is putting effort in moving from conventional powertrain technology to hybrid & electric powertrains. This efforts plays a vital role to achieve cleaner environment, improved performance, reduced fossil-fuel dependency, low noise for meeting regulatory & customer requirements. Automotive industry is facing a challenge of meeting stringent CO2 emission targets of 95g & 175g per kilometer for passenger cars & light commercial vehicles respectively. 48V is an important stepping stone in this direction.
A novel approach on range prediction of a hydrogen fuel cell electric truck C.Venkatesh - Manager - Product Development, Sustainable Mobility & Advanced Technologies Abstract: A novel approach on range prediction of a hydrogen fuel cell electric vehicle Abstract: Today's growing commercial vehicle population creates a demand for fossil fuel surplus requirement and develops highly polluted urban cities in the world. Hence addressing both factors are very much essential. Battery electric vehicles are with limited vehicle range and higher charging time. So it is not suitable for the long-haul application. Hence the hydrogen fuel cell based electric vehicles are the future of the commercial electric vehicle to achieve long range, zero emission and alternate for reducing fossil fuels requirement. The hydrogen fuel-cell electric vehicle range, it means the total distance covered by the vehicle in a single filling of hydrogen into the onboard cylinders.
Automation is expanding in every possible direction and it was only time before it reached the Automobile sector. There has been tremendous traction towards autonomous cars since last 2-3 yrs as a probable solution to reduce accidents and promote safe and comfortable commute. Many companies have expressed their interest in developing some part(s) of it and when would all of this culminate resulting in a fully autonomous car. But as every coin has two aspects so same does automation. This paper covers the future of autonomous cars from Indian perspective, covering possible challenges, complex use cases, advantages, technology enablers, economy outlook etc. India has the dubious honor of ranking first in road deaths in the world at present & accounts for 10 percent of global road accidents with more than 1.46 lakh fatalities annually.
A DIGITALIZED VALIDATION APPROACH FOR REAL TIME AND REMOTE MONITORING OF AN OFF-HIGHWAY VEHICLE PERFORMANCE V.Jagannathan 1.a* , B.Jaiganesh 2.b & S.Sudarsanam 3.c Mahindra & Mahindra Limited, Mahindra Research Valley, Mahindra World City, Anjur PO, TN, India Corresponding author Email- V.JAGANNATHAN@mahindra.com Validation of agricultural tractors is necessary to ensure that these machines perform to their expected potential and are aptly matched with implements. Testing these machineries in real-time while performing activities in the field allows a bigger picture to be seen; the performance data incorporates the effects of many external factors (Soil, Climate etc.). Tractor Performance data apprehending is the vital part of validation. Data acquisition of key performance parameters during field validation in different application/different countries is of utmost importance.
Any physical body being propelled through the air has drag associated with it. Drag will be created on the surface of the vehicle due to the flow separation at the rear end. In aerodynamics the flow separation can often result in increased drag particularly pressure drag, to delay the flow separation, the vortex generators are used on the roof end of the vehicle just before the point of flow separation. The objective of this project is to perform aerodynamic analysis of commercial vehicle using active vortex generators concept. First, the aerodynamic analysis of a baseline commercial vehicle model is performed and same is validated with the scaled model by using a wind tunnel test. Further analysis has been done by using active vortex generators concept with variation of angle of attacks for vehicle speed of 50, 70, 90 kmph. Also, analysis has been carried out for six different yaw angles. The simulation is carried out with the use of ANSYS Fluent.
The study aims to evaluate the lateral stability of tractor-front end loader system in consideration with difficult work conditions based on various loader bucket lifting heights from ground while driving a system on transversal slopes. In the proposed method the centre of gravity of tractor-front end loader system was calculated and analysed to evaluate the transversal overturning of the system. This overturning of the system was analysed by applying mathematical equations presented in past studies and compared with the newly developed prediction model for 3 test tractors of 25 HP. The excel spreadsheet comprised of mathematical equations used to calculate the Tractor Stability Index (TSI) on transverse slope with respect to loader bucket height and payload in dynamic condition. A criterion has been defined to categorize the Tractor Stability Index (TSI) poor to excellent on a scale of 0 to 4 where <0 being the very poor, 0-2 Poor, 2-4 Good and >4 being the excellent.
Downsizing is one of the crucial activities being performed by every automotive engineering organization. The main aim is to reduce – Weight, CO2 emissions and achieve cost benefit. All this is done without any compromise on performance requirement or rather with optimization of system performance. This paper evaluate one such optimization, where-in radiator assembly with two electric fan is targeted for downsizing for small commercial vehicle application. The present two fan radiator is redesigned with thinner core and use of single fan motor assembly. The performance of the heat exchanger is tested for similar conditions back to back on vehicle and optimized to get the balanced benefit in terms of weight, cooling performance and importantly cost. This all is done without any modification in vehicle interface components except electrical connector for fan. The side members and brackets design is also simplified to achieve maximum weight reduction.
Child safety lock override mechanism - For Woman Safety Woman safety is a major concern in present world and the related laws ensure that government also cares for it. Mostly in public taxies, there is possibility for the driver to harass women occupant by activating the child safety lock without her knowledge. Purpose of child safety lock is to prevent child in the rear seat from opening the door and fall from vehicle. This will cause severe injury to the child. When child lock is ON, Inside Door handle becomes inoperative and the child cannot open the door. Only way to open door is through outside handle. But there is possibility for Taxi driver to kidnap the woman customer by enabling child safety lock, so that inside handle becomes inoperative and make her get trapped in car. To prevent such cases in future, Ministry of Road Transport ordered the manufacturers to delete child safety lock for all commercial vehicles.
Fuel economy is becoming one of the key parameter as it not only accounts for the profitability of commercial vehicle owner but also has impact on environment. Fuel economy gets affected from several parameters of engine such as Peak firing pressure, reduction in parasitic losses, improved volumetric efficiency, improved thermal efficiency etc. Compression ratio is one of key design criteria which affects most of the above mentioned parameters, which not only improve fuel efficiency but also results in improvement of emission levels. This paper evaluates the optimization of Compression ratio and study its effect on Engine performance. The parameters investigated in this paper include; combustion bowl volume in Piston and Cylinder head gasket thickness as these are major contributing factors affecting clearance volume and in turn the compression ratio of engine. Based on the calculation results, an optimum Compression Ratio for the engine is selected.
Tyre Traction Trailer is a device designed to find the Peak Brake co-efficient of C2 and C3 tyre as per ECE R117. The trailer is towed by the truck and is braked suddenly to evaluate braking co-efficient of specimen tyre. It is a single wheel trailer equipped with load cell to capture tire loads (Normal and longitudinal)while braking. Traction Trailer is modelled in MSC Adams and rigid body simulation is carried out for static stability of the system. Dynamic simulations were performed to understand locking of wheels during braking. Body frame was further modelled as flex body to perform structural analysis of the frame. The paper contains stress and deformation plots of trailer Structure under various loading conditions, change in Centre of gravity, weight transfer and forces on springs during braking and cornering, plots of tractive and normal load on tyre during braking.
In the current commercial vehicles market, ride-comfort and handling are crucial parameters for the customer and end user. There are various aspects which determine the vehicle behaviour. One of aspects is the structural rigidity of the vehicle, which has its own effect on vehicle dynamics. To meet the required stiffness of the main structural component of the vehicle i.e. chassis frame, FEA analysis has to be done in current methodology. The number of iterations have to be done to build an appropriate model with low weight, which can meet the design requirements. At first, conceptual design mock-up unit is to be developed then FEA (CAE) analysis to be done on it. If any design criteria are not met, then this cycle repeats again until it fulfils the required stiffness. Today, the direct stiffness procedure is the basic principle of almost every FEA software package.
The existing rule no. 62 of CMVR, 1989 applies to various commercial vehicles and yet is unable to provide a promising template to have a concise format which will cover all the motor vehicles and their different components with more precise equipment plus virtual testing along with proper management of time during the bulk inspection of all the vehicles. This paper will include all the technicalities and the different course of actions which must be taken into account for the proper implementation of the desired regulations on the designated concern. The idea behind this paper is to have a compact procedural document for the periodical inspection and maintenance of all the motor vehicles running on the Indian Roads that adhere to the basic safety concerns of other on-road vehicles, the pedestrians and the surroundings.
Road and Engine borne noise are the most prominent sources of noise in any commercial vehicle. With advancement in technology and encouraging prospects in hybrid & electric vehicles, road noise can be set aside as the single most dominant source for vehicular NVH problems. In this paper, a full vehicle model is considered for complete NVH simulation with two acoustic and two structural response points. Random road excitations are applied at various vehicle speeds to determine the response characteristics. An elaborate study is conducted to understand the effects of vehicle speed and road conditions on the vehicle. An attempt is also successfully made to diagnose the effects of road excitations on the system behaviour by considering the suitable transfer functions. The methodology can be readily extended to any type of vehicle and speed as the excitations are independent of these parameters.
According to research study 45% of death cause due to not getting help on time to the injured person. Research has proven that if injured person is not found any option of help then they also loose the power to fight such critical situation due to psychological effect. When vehicle met accident, people are not getting on time support, this delay is the major cause of death in developing nations. Presently there is no any robust system available in market for passenger & commercial vehicles which helps to provide on time help to the injured persons & saves human life. In current situation low cost life saving device is need of our society. This paper deals with the design & development of the low cost-life saving device. This paper also comprises the scenario when any vehicle meet an accidents within certain speed limit then how the intelligent life saving device will work & save the life's.
Electric mobility is the future of tomorrows transport both in the public and private sector. One of the major challenges / issues faced by the electric vehicles is increased time duration of charging. Research classifies Electric Vehicle Charging into level 1, 2, 3 & DC fast charging. Slowest mode being level 1 which needs 120V / 15A, while Level 3 and fast DC charging are faster modes where in less time duration are required for battery charging. In this research a model of solar charging station was analysed for the Indian condition. Analysis indicate that Level 3 and fast DC charging are preferred where in commercial vehicles whereas Level one and 2 are suitable for vehicles that are used for limited periods. An analysis of solar energy as a source of power to charging stations is also made.
An analysis of the Fuel Cell Pack with different Drive cycles Abstract: In the view of the Environmental friendly future, every automotive manufacturer is making a move towards electric mobility. Zero emission can be achieved with the help of electric vehicles. However, there are some limitations too. Battery electric vehicle (BEV) gives a limited range in the vehicles and even their market penetration is difficult because of their energy storage capability. A fuel cell unit can be added to the system, which increases the range and the energy capacity of the system. Hydrogen fuel cell electric vehicle (FCEV) system is faster to refill compared to plugin charging in the Battery electric vehicle (BEV). This study deals with the behavioural analysis of the Polymer Electrolyte Membrane (PEM) Fuel cell based on the different drive cycles. Fuel cell model has been developed and simulated in the SIMULINK environment. Simulation results were obtained for the different drive cycles.
In commercial Vehicles industry, customer demands the vehicle with higher payload capacity. In order to achieve the higher payload, the vehicle weight must be reduced. Role of CAE (Computer Aided Engineering) team in the above objective is to provide optimized solution for the currently available designs. There are many capable softwares available in the market for the optimization. But performing optimization on the basis of static or dynamic analysis involves a little risk of design losing the strength. In our organization, we have developed a method, which will eliminate the risk of lower strength of the component. In this method, modified design from the optimization analysis has to undergo the fatigue analysis repetitively until it qualifies both the criteria of optimized design & adequate fatigue strength. In the above process fatigue analysis is time consuming process. To reduce the time taken by fatigue analysis, we are using the frequency based vibration fatigue method.
While advanced automotive system assemblies contribute greater value to automotive safety, reliability, emission/noise performance and comfort, they are also generating higher temperatures that can reduce the functionality and reliability of thesystem over time. Thermal management and insulation are extremely important and highly demanding in BSVI, RDE and Non-IC engine operating vehicles. Passenger vehicle and Commercial vehicle exhaust systems are facing multiple challenges such as packaging constraints, weight reduction andthermalmanagement requirements.Frugal engineering is mandatory to develop heat shield in the exhaust system with minimum heat loss. The focus of the paper is to design, develop and validate heat shield products with different variables such as design gap, insulation material, sheet metal thickness and manufacturing processes. 1D and 3D computational simulations are performed with different gaps from 3 mm to 14 mm are considered.
Ride Comfort forms a core design aspect for suspension and is to be considered as primary requirement for vehicle performance in terms of drivability and uptime of passenger. Maintaining a balance between ride comfort and handling poses a major challenge to finalize the suspension specifications. The objective of this project it to perform ride- comfort analysis for a commercial truck using MATLAB Simulink. First, benchmarking was carried out on a 4x2 commercial truck and the physical parameters were obtained. Further, a mathematical model is developed using MATLAB Simulink R2015a and acceleration- time data is collected. An experimentation was carried out on the truck at speeds of 20 kmph, 30 kmph, 40 kmph and 50 kmph over a single hump to obtain actual acceleration time domain data. The model is then correlated with actual test over a single hump. This is followed by running the vehicle on Class A, B & C road profiles to account for random vibrations.