Refine Your Search

Date

Date

Safety regulations and standards Heavy Duty Lighting Standards Committee

Search Results

Viewing 1 to 20 of 22
12Next >Last >>
Sort by published
Standard

Clearance, Sidemarker, and Identification Lamps for On-Road Vehicles 2032 mm or More in Overall Width
2023-04-27
WIP
J2042
Canadian and UN documents listed. Entire document copyedited for grammar, clarity, and up-to-date language. Added Figure 3 for white photometric requirements. Title adjusted. § 2.2: Added SAE J2040 & J2261. Added UN publications. Updated title and their respective availability of FMCSA publication. Added Canadian publications. Added TTMA publication. § 3: Separated light function definitions from lamp/device definitions in accordance with recent practice in other SAE Standards. Added "end-outline marker lamp" designation as an alternative term for clearance lamp.
Standard

Side Turn Signal Lamp for Long Vehicles
2020-08-03
CURRENT
J2039_202008
This SAE Recommended Practice provides test procedures, requirements, and guidelines for side turn signal lamps intended for use on vehicles 12 m or more in overall length, except pole trailers. Side turn signal lamps conforming to the requirements of this document may be used on other large vehicles such as trucks, truck tractors, buses, and other applications where this type of lighting device is desirable. It is not intended for use on shorter vehicles due to the higher intensity requirements of SAE J2039 compared to the SAE J914 devices.
Standard

Reflex Reflectors for Use on Vehicles 2032 mm or More in Overall Width
2018-05-02
WIP
J2041
This SAE Standard provides test procedures, requirements, and guidelines for reflex reflectors used on vehicles 2032 mm or more in overall width. Reflex reflectors conforming to these requirements may also be used on vehicles less than 2032 mm in overall width.
Standard

Clearance, Sidemarker, and Identification Lamps for Use on Motor Vehicles 2032 mm or More in Overall Width
2008-09-26
HISTORICAL
J2042_200809
This SAE Standard provides test procedures, requirements, and guidelines for clearance, sidemarker, and identification lamps intended for use on vehicles 2032 mm or more in overall width. A clearance lamp, sidemarker lamp, or an identification lamp conforming to the requirements of this document may be used on vehicles less than 2032 mm in overall width.
Standard

Rear High Mounted Stop Lamps and Rear High Mounted Turn Signal Lamps for Use on Vehicles 2032 mm or More in Overall Width
2006-04-03
HISTORICAL
J1432_200604
This SAE Recommended Practice provides test procedures, requirements, and guidelines for high-mounted stop lamps and high-mounted turn signal lamps intended for use on vehicles 2032 mm or more in overall width. This document applies to trucks, motor coaches, van type trailers, and other vehicles with permanent structure greater than 2800 mm high. This document does not apply to school buses, truck tractors, pole trailers, flat-bed trailers, pick-up truck with dual wheels and trailer converter dollies. The purpose of the high-mounted stop lamp(s) and high-mounted turn signal lamp(s) is to provide a signal over intervening vehicles to the driver of following vehicles.
Standard

Emergency Warning Device and Emergency Warning Device Protective Container
2006-02-24
HISTORICAL
J774_200602
This SAE Standard provides test procedures and performance requirements for emergency warning devices (triangular shape), without self-contained energy sources, that are designed to be carried in motor vehicles and used to warn approaching traffic of the presence of a stopped vehicle, except for devices designed to be permanently affixed to the vehicle, and provides test procedures and performance requirements for protective containers for such emergency warning devices.
Standard

Vibration Test Machine and Operation Procedure
2005-07-19
HISTORICAL
J577_200507
This SAE Recommended Practice provides procedures, and information to conduct vibration (impact) tests on lighting devices and their components as well as other safety equipment used on vehicles.
Standard

Clearance, Sidemarker, and Identification Lamps for Use on Motor Vehicles 2032 mm or More in Overall Width
2003-05-19
HISTORICAL
J2042_200305
This SAE Standard provides test procedures, requirements, and guidelines for clearance, sidemarker, and identification lamps intended for use on vehicles 2032 mm or more in overall width. A clearance lamp, sidemarker lamps, or an identification lamp conforming to the requirements of this document may be used on vehicles less than 2032 mm in overall width.
Standard

High-Mounted Stop Lamps for Use on Vehicles 2032 mm or More in Overall Width
2000-03-08
HISTORICAL
J1432_200003
This SAE Recommended Practice provides test procedures, requirements, and guidelines for high-mounted stop lamps intended for use on vehicles 2032 mm or more in overall width. This document applies to trucks, motor coaches, van type trailers, and other vehicles with permanent structure greater than 2.8 m high. This document does not apply to school buses, truck tractors, pole trailers, flat-bed trailers, and trailer converter dollies. The purpose of the high-mounted stop lamp or lamps is to provide a signal over intervening vehicles to the driver of following vehicles.
Standard

Clearance, Sidemarker, and Identification Lamps for Use on Motor Vehicles 2032 mm or More in Overall Width
2000-03-08
HISTORICAL
J2042_200003
This SAE Standard provides test procedures, requirements, and guidelines for clearance, sidemarker, and identification lamps intended for use on vehicles 2032 mm or more in overall width. A clearance lamp, sidemarker lamps, or an identification lamp conforming to the requirements of this document may be used on vehicles less than 2032 mm in overall width.
Standard

Emergency Warning Device and Emergency Warning Device Protective Container
2000-01-28
HISTORICAL
J774_200001
This SAE Standard provides test procedures and performance requirements for emergency warning devices (triangular shape), without self-contained energy sources, that are designed to be carried in motor vehicles and used to warn approaching traffic of the presence of a stopped vehicle, except for devices designed to be permanently affixed to the vehicle, and provides test procedures and performance requirements for protective containers for such emergency warning devices.
Standard

High-Mounted Stop Lamps for Use on Vehicles 2032 mm or More in Overall Width
1997-09-01
HISTORICAL
J1432_199709
This SAE Recommended Practice provides test procedures, requirements, and guidelines for high-mounted stop lamps intended for use on vehicles 2032 mm or more in overall width. This document applies to trucks, motor coaches, van type trailers, and other vehicles with permanent structure greater than 2.8 m high. This document does not apply to school buses, truck tractors, pole trailers, flat-bed trailers, and trailer converter dollies. The purpose of the high-mounted stop lamp or lamps is to provide a signal over intervening vehicles to the driver of following vehicles.
Standard

STOP LAMPS FOR USE ON MOTOR VEHICLES 2032 mm OR MORE IN OVERALL WIDTH
1991-06-01
HISTORICAL
J1398_199106
This SAE Standard provides test procedures, requirements, and guidelines for stop lamps intended for use on vehicles 2032 mm or more in overall width. Stop lamps conforming to the requirements of this document may be used on vehicles less than 2032 mm in overall width.
12Next >Last >>
X