Search Results

With the continuing challenges of future fuel economy targets carbon fiber composite materials are one facet of a lightweighting strategy to enable reduced fuel consumption. In general, use of lightweight materials such as carbon fiber composites in vehicle design generates vehicle NVH performance degradation. To address this potential issue at the design phase, there is a need to develop correlated CAE models for carbon fiber vehicle parts to evaluate the NVH impact of carbon fiber composite material use in vehicle design. To develop correlated CAE models for lightweight vehicle design with the use of carbon fiber composite vehicle body parts, an experimental study was conducted to determine the material and NVH characteristics of the carbon fiber composite materials. In this paper, the damping properties and NVH modal analysis results for structural carbon fiber thermoset composite panels and body parts (B-pillar upper insert and B-pillar lower insert) is presented.

OEMs are racing to develop lightweight vehicles as government regulations now mandate automakers to nearly double the average fuel economy of new cars and trucks by 2025. Lightweight materials such as aluminum, magnesium and carbon fiber composites are being used as structural members in vehicle body and suspension components. The reduction in weight in structural panels increases noise transmission into the passenger compartment. This poses a great challenge in vehicle sound package development since simply increasing weight in sound package components to reduce interior noise is no longer an option [1]. This paper discusses weight saving approaches to reduce noise level at the sources, noise transmission paths, and transmitted noise into the passenger compartment. Lightweight sound package materials are introduced to treat and reduce airborne noise transmission into multi-material lightweight body structure.

Lightweighting of vehicle panels enclosing vehicle cabin causes NVH degradation since engine, road, and wind noise acoustic sources propagate to the vehicle interior through these panels. In order to reduce this NVH degradation, there is a need to develop new NVH sound package materials and designs for use in lightweight vehicle design. Statistical Energy Analysis (SEA) model can be an effective CAE design tool to develop NVH sound packages for use in lightweight vehicle design. Using SEA can help engineers recover the NVH deficiency created due to sheet metal lightweighting actions. Full vehicle SEA model was developed to evaluate the high frequency NVH performance of “Vehicle A” in the frequency range from 200 Hz to 10 kHz. This correlated SEA model was used for the vehicle sound package optimization studies. Full vehicle level NVH laboratory tests for engine and tire patch noise reduction were also conducted to demonstrate the performance of sound package designs on “Vehicle A”.

Hands-free phone use is the most utilized use case for vehicles equipped with infotainment systems with external microphones that support connection to phones and implement speech recognition. Critically then, achieving hands-free phone call quality in a vehicle is problematic due to the extremely noisy nature of the vehicle environment. Noise generated by wind, mechanical and structural, tire to road, passengers, engine/exhaust, HVAC air pressure and flow are all significant contributors and sources of noise. Other factors influencing the quality of the phone call include microphone placement, cabin acoustics, seat position of the talker, noise reduction of the hands-free system, etc. This paper describes the work done to develop procedures and metrics to quantify the effects that influence the hands-free phone call quality.

The Multi Material Lightweight Vehicle (MMLV) developed by Magna International and Ford Motor Company is a result of a US Department of Energy project DE-EE0005574. The project demonstrates the lightweighting potential of a five passenger sedan, while maintaining vehicle performance and occupant safety. Prototype vehicles were manufactured and limited full vehicle testing was conducted. The Mach-1 vehicle design, comprised of commercially available materials and production processes, achieved a 364 kg (23.5%) full vehicle mass reduction, enabling the application of a 1-liter 3-cylinder engine resulting in a significant environmental benefit and fuel reduction. This paper includes details associated with the noise, vibration and harshness (NVH) sound package design and testing. Lightweight design actions on radiating panels enclosing the vehicle cabin typically cause vehicle interior acoustic degradation due to the reduction of panel surface mass.

Vehicle interior acoustic performance is an important part of customer satisfaction. Radiating panels enclosing the vehicle cabin are very important for vehicle interior quietness. One of the most critical vehicle panels for the engine noise propagation to the vehicle interior is the dash panel. Most of the engine noise propagates through the dash panel to the vehicle interior. The dash material density, thickness and its damping properties significantly influence the dash panel sound transmission performance. In this study, the dash design of “Vehicle A” has been evaluated using the Statistical Energy Analysis (SEA) modeling and NVH testing tools. SEA and physical testing of 2′×2′ square sample panels were conducted on different dash materials and lamination materials. Dash component level and vehicle level SEA to TEST correlation results are reported to highlight the NVH performance of the dash design as well as the SEA prediction capability and its applicability in vehicle design.

A quiet passenger compartment is highly desired by today's customers. Vehicle design teams spend significant time and resources to minimize the vehicle's interior noise due to different exterior noise sources. Drive-by vehicles on the highways generate one of these noise sources. The objective of this study is to establish a correlation between customer's on-road experience due to drive-by noise and Noise Reduction Level (body transparency) tests conducted in a reverberation room. The average Noise Reduction Level (NRL) obtained in the reverberation room tests correlates (R2=0.89) with the peak loudness of on road tests. A sound quality listening study was also conducted to determine the most preferred NRL spectral distribution and its frequency range sensitivity.

At low frequencies, the finite element method reliably predicts the dynamic response of structures. At high frequencies where modal density is high, statistical energy analysis (SEA) is a useful tool to determine the global dynamic behavior of the structures. SEA gives only the space frequency band averaged energy for each subsystem. In the mid-frequency range where both short and long waves are present, neither low nor high frequency approximation to the dynamic response is valid. In this frequency range, there is a need to utilize another technique to capture the dynamic response of the structure. In this study, the energy finite element analysis (EFEA) method is evaluated as a possible technique to close the mid-frequency analysis gap related to NVH analyses. EFEA gives spatial variations of energy density and power in each subsystem, and models localized damping treatment and localized power input.

A finite element-based acoustic-structure interaction analysis tool has been developed to determine the noise transmission loss characteristics of door seal systems. This tool has been applied to determine the effects of the individual parameters, such as seal material density, seal constitutive model, separation distance between seal layers, external cavity shape, and seal prestress field, on noise transmission characteristics. Our findings indicate that the external and internal cavity shapes, seal material density, and deformed seal geometry are the key factors affecting the noise transmission through seal system. Increasing seal material density decreases the resonance frequencies and increases the overall sound transmission loss. Changing the separation distance between seal layers changes the sound transmission characteristics without changing the compression load deflection behavior of the seal system.

Nonlinear finite element analysis has been applied to determine the conditions conducive to seal system aspiration. Aspiration noise occurs and propagates into the passenger compartment of a vehicle when there exists a gap between the seal and sealing surface due to pressure differential between the vehicle interior and exterior. This pressure differential is created by the vehicle movement which reduces the pressure acting on the exterior surface of the vehicle, and it is on the order of , where ρ and U∞ are the density of air and vehicle speed, respectively. The pressure difference is also created by turning on the climate control system which pressurizes the passenger cavity. Since aspiration increases door seal cavity noise level and creates a direct noise transmission path without any significant transmission loss, the presence of an aspiration noise source can dominate the vehicle interior noise level if it is close to the driver or passenger's ears.