Refine Your Search

Topic

Author

Affiliation

Search Results

Technical Paper

AUTOMOTIVE VEHICLE TRANSMISSION SYSTEMS

2019-11-21
2019-28-2521
Abstract:At present there are a few types of transmission system available in automated industry, there might some variation in transmission system but the basic working and principle is still the same. Many big automotive manufacturers use different technologies in their transmission system but they still use the same basic principle in their transmission systems. This new technology which is brought by Koenigsegg has changed the way people think about transmission system. This new transmission system is known as Koenigsegg Direct Drive and is currently used by one automotive manufacturer and in one vehicle only, but it soon might change the way it is now.
Technical Paper

Self-Sensing, Lightweight and High Modulus Carbon Nanotube Composites for Improved Efficiency and Safety of Electric Vehicles

2019-11-21
2019-28-2532
Carbon Composites (CFRP) have been touted to be an essential component of future automobiles due to their mechanical properties and lightweight. CFRP has been adopted successfully for secondary and primary structures in Aerospace industry. In Automobiles, they are incorporated in models like the BMW i-series. CFRP suffers from 2 major problems. Delamination of Composites leads to catastrophic and rapid failure which could be dangerous in passenger vehicles. Delamination occurs whenever there is a shock on the composite. Secondly, Composites need regular expensive maintenance to ensure that the material is intact and will not compromise passenger safety. Carbon Nanotubes in composites have shown a substantial increase in delamination resistance. A 0.1wt% addition of HiPCO® Single-walled Carbon Nanotube provides both self-sensing and improved fracture resistance.
Technical Paper

Employing natural plant based fiber in interior automotive parts for cost & weight benefit

2019-11-21
2019-28-2559
The Automotive industry is in ever more need for a lesser weight car due to progressively stringent emission norms and the demand of customer to have better mileage. It can be a gargantuan challenge for automotive manufacturers to search for lesser weight material to meet both customers as well as regulatory norms. But in some cases such lower weight material can increase the cost and adding a expensive material which increases overall cost to a price sensitive market like India is not favorable. One such solution is using the indigenous plant fiber (Jute) in combination with propylene (PP) to make Interior plastics components. Jute a vegetable fiber also referred to as "the golden fiber" has high tensile strength, low extensibility and is well established in fabric, packing, agriculture, construction industries. The biodegradable Jute lesser weight & abundance (India is the leading manufacturer of the Jute) can be utilized in making automobile trim parts in India.
Technical Paper

To establish the correlation in between Computer Aided Engineering & physical testing of automotive parts returnable case (Stacktainer).

2019-11-21
2019-28-2569
Automotive returnable cases (Stacktainers) are being used to transport the automotive parts through surface & seaways. No automotive manufacturer wants to spend money on woods, paper & cardboard again and again, it`s better to pay once for robust & reusable cases. these provide better protection to parts from its manufacturing to assembly line of vehicle. While transporting, any kind of crack or failure of returnable cases may lead to loss of money, human & time. To ensure the safety, these pallets have to be validated for vibrations coming from surface irregularities, sea waves & load due to stacking of cases one above other. The objective of this study is to establish a correlation in between the physical testing & simulation in Computer added Engineering (CAE) of automotive returnable case (Stacktainers). There are different types of tests considered to validate the returnable case, rough road evaluation, Multi-axial Vibration & strength evaluation.
Technical Paper

Improved update-over-the-air solution through standardization of ‘software/firmware package format and flash jobs’

2019-11-21
2019-28-2435
This paper investigates and proposes the possibilities of standardizing the software/firmware package format and flash jobs in order to provide the possibility of productizing the update-over-the-air solution regarding on-board vehicle components and make use of it in all OEMs with minimum configuration changes and customization. The update-over-the-air solution in the automotive sector is provided by various suppliers and needs to be customized to meet various OEMs requirements. Possible Variants of OEM requirements are: • Variant 1 o Customer Portal + Backend + vehicle on-board components solution from supplier • Variant 2 o Customer Portal + Backend solution from OEM o Vehicle on-board components from supplier • Variant 3 o Backend from OEM o Customer Portal + vehicle on-board components from supplier ODX, VBF, and many other formats from OEMs include software/firmware packages.
Technical Paper

Paper Title : Connectivity in 2wheeler: Opportunities & Challenges

2019-11-21
2019-28-2437
Abstract: Future of Mobility is mainly driven by 3 main pillar viz Connected , Electrified and Automated Driving. With advancement in Communication Technology supplemented by huge customer Base , Connectivity has proven to deliver better Services to the End-user. The next step in this journey would be to connect the so called “Things” and the Things that we want to connect is the 2 wheeler in the Mobility domain This paradigm shift in the Mobility Landscape is expected to bring plethora of opportunities on one side as well as new challenges that were never witnessed in the realm of Mobility in the Past. This paper focuses on Opportunities in terms of Location Based services, Vehicle Management, Data Analytics, Infotainment , and possible Business scenarios and Models as well as challenges in Terms of Security and Data Ownership Methodology: Analysis of OEM and Supplier strategies/approaches and upcoming trends in connectivity and electrification.
Technical Paper

Analysis Of GaN Based BLDC Motor Drive For Automotive Application

2019-11-21
2019-28-2471
Objective Automotive sector is rapidly moving towards electric vehicle. BLDC motor is gaining popularity in the field of electric vehicle due to its high torque to weight ratio and simple control. In this paper we will focus on Switching loss characterization of 3 kW GaN based BLDC drive for electric vehicle. To improve efficiency of drive gallium-nitride based power transistor is used instead of Si MOSFET. GaN devices enable the design of inverter at higher frequencies with improved power density and efficiency as compared to traditional Si MOSFETs. Methodology In this paper commercially available GaN devices compared with Si MOSFETs. The power devices, which are selected for the performance comparison, are EPC2022 GaN by EPC, GS61008P GaN by Gan System and SiDR668DP Si MOSFET by Vishay. The Switching losses analytically predicted in MATHCAD tool and then compared with SPICE simulation losses. Double pulse test circuit is used to find out power losses of power transistors.
Technical Paper

FABRICATION AND WEAR CHARACTERISTICS BASALT FIBER REINFORCED POLYPROPYLENE MATRIX COMPOSITES

2019-11-21
2019-28-2570
Generally brake pads are manufacturing by use of asbestos materials, these materials are chemically harmful and toxic, affects human health. The present investigation fabricates polypropylene composites with mixing constant volume [5 Vol.%] of alumina nano particles and different volume percentages [0%, 5%, 10% & 15%] of basalt fibre by hand layup compression technique. The wear characteristics of polypropylene matrix composites were tested by dry sliding condition using pin on disc apparatus configuration with hardened steel counter-face at elevated temperature. The load was applied 30N to 70N with the interval of 20N and varying of sliding speed 300 rpm to 900rpm with the interval of 300rpm for the time period of 0-180 sec. The wear rate was decreases with addition of alumina nano particle and also increases the frictional force for the effect of basalt fibre content present in the composites. The co-efficient of friction was increases from 0.1 to 0.66 under normal loading condition.
Training / Education

FAA Part 21 Certification Procedures for Products and Parts

2019-11-11
Part 21 is the FAA regulation that provides the regulatory framework to conduct certification of products and parts. This includes the engineering, airworthiness, production and quality systems. The aerospace industry is hinged around compliance with Part 21; however, comprehension of Part 21 and its role in civil certification is challenging. This course is designed to provide participants with an understanding of the processes that encompass aircraft certification, including compliance with FARs, certification procedures and post certification responsibilities.
Training / Education

AS13000 Problem Solving Requirements for Suppliers

2019-10-21
AS13000 defines the Problem-Solving standard for suppliers within the aero-engine sector, with the Eight Disciplines (8D) problem solving method the basis for this standard. This two-day course provides attendees with a comprehensive and standardized set of tools to become an 8D practitioner and meets all the requirements of the training syllabus in AS13000. Successful application of 8D achieves robust corrective and preventive actions to reduce the risk of repeat occurrences and minimize the cost of poor quality.
Training / Education

AS13003 Measurement System Analysis (MSA) Requirements for Aerospace Engine Supplier Quality

2019-10-10
AS 13003:2015 stipulates requirements to establish an acceptable measurement system (for variable and attribute features) for use on aerospace engines parts and assemblies.  Measurement Systems Analysis (MSA) is used to evaluate and improve measurement systems in the workplace because it evaluates the test method, measuring instruments, and the process of acquiring measurements. The Aerospace Engine Supplier Quality (AESQ) Strategy Group published AS13003 to define the minimum requirements for conducting MSA for variable attribute assessment on characteristics as defined on the drawing specification.
Book

The Road to the Top is Not on the Map: Conversations with Top Women of the Automotive Industry

2019-10-01
Carla Bailo, CEO of the Center for Automotive Research, and Terry Barclay, CEO of Inforum, bring together over 30 of the most influential women in the automotive industry to share their insight and advice. From suppliers to OEMs, they hail from every corner of the industry. Readers will learn how to take charge of their own careers by understanding the experiences these professionals. Topics include: • Work-Life Integration - How can you be whole at home, at work, and in the community? • Education and Lifelong Learning - Do you really need a graduate degree? • Mentor and Sponsor Relationships - How do you find mentors and sponsors and form productive relationships with them? • Career Challenges - How do you evaluate when to take career risks? How do you say yes when all the boxes aren't checked? • Resilience - Where do you find the internal fortitude to keep going? • Personal Satisfaction - What do these leaders find most joyful about their careers?
Training / Education

Introduction to Cyber Security for Commercial Aviation

2019-09-26
Despite the advantages of electronic flight bags (EFB), passenger entertainment and email access during flights, and the ability to access aircraft repair manuals electronically, computer interconnectivity throughout aviation has opened the aviation sector to cyber-attacks that could impact flights, data, and safety. This two-day seminar is intended to introduce aviation professionals to the need to implement cyber security throughout commercial aviation including the supply chain.
Technical Paper

New Technologies for Airframe Structural Assemblies

2019-09-16
2019-01-1915
With air traffic demand constantly increasing and several years of aircraft production in their backlog, major aircraft manufacturers are now shifting their focus toward improving assembly process efficiency. One of the most promising solutions, known as “One Side Assembly”, aims to perform the whole assembly sequence from one side of the structure (drilling, temporary fastener installation and removal, blind fastener installation, assembly control) and with a high level of integrated automation. Investments in robotic equipment, automation engineering and innovation are very active and automation capabilities have already increased a lot in the aerospace industry. As an example, drilling operations for large dimensions airframe are clearly moving from manual to automated. However, despite more and more clever and sophisticated robotics, the use of historical fasteners with two side installation method remains a strong limitation to innovative automated assembly sequences.
Technical Paper

Development of Multi-Material Overhead Stowage Systems for Commercial Aircrafts by Using New Design and Production Methods

2019-09-16
2019-01-1858
The relevance of innovative and functional lightweight components for aircrafts has risen significantly during the recent years. In this context, modern lightweight materials as well as cost-efficient and time-saving manufacturing technologies are required for a future aircraft production. The so called Hybrid SMC Technology and the SMC-Foam-Sandwich Technology are promising approaches for the cost-efficient and time-saving manufacturing of lightweight, geometrically complex and functional aircraft components. Both technologies have been used for the development of a new generation overhead stowage system. It is realized by sidewalls made out of enhanced SMC technologies with directly implemented metallic load introduction elements and regular sandwich structures that can be assembled by a quick-assembly principle.
Technical Paper

Automation of Sorting and Kitting from Cutting Tables

2019-09-16
2019-01-1899
Within the current part production of carbon fiber parts a lot of manual work is included for sorting and kitting of automatic cut plies. This is required due to the high raw material costs and enables a good utilization of the materials. Automation of this non-value adding process will be a big benefit for the part production. The high variety of shapes and the different materials to be processed are complex boundary conditions, which are to be overcome. Broetje is in development of handling systems and automation solutions, which are used for a high variety of materials as well as for a high variety of shapes. These systems are meant to be an add-on for existing cutting tables as well as for fully integrated production systems with downstream automation equipment like draping hoods. Mayor challenges to overcome are safe gripping capabilities, detection of #non-cut fibers, high variety of shapes, complex logistic management. These challenges are addressed with Broetje’s ASK Solution.
Technical Paper

Frequency Inspection of Brake System Components

2019-09-15
2019-01-2117
Frequency inspection has long been a tool utilized by manufacturers of brake system components as a means of quality control. This is important to combat perceived defectiveness of a system that experiences issues, such as brake squeal, as well as to identify actual defects in the parts going out to customers. Every component has its own resonance frequencies based on the dynamics of that component. Knowledge of the resonance frequencies of each component provides insight that can prevent manufacturers from sending out defective units, whether they be actual defects or perceived defects. NVH engineers who understand these phenomena perform theoretical analysis and acquire experimental data in the lab to gain insight into the part that will be produced on the assembly line. Unfortunately, the frequency requirements, and the consequences thereof, defined by the NVH engineers can still remain somewhat of a mystery to the manufacturing engineers who are tasked with applying them.
Technical Paper

engine out dynamic emissions signal reconstruction via conventional exhaust gas analyzer

2019-09-15
2019-24-0238
Since September 2018, the Euro 6c stage has introduced a dual validation via a new vehicle test bench procedure (WLTC) and a Real Drive Emission (RDE) cycle. The latter will generate a very large scope of conditions to be taken into account, making the calibration and validation tasks much more complex. In the meantime, the development duration and costs are decreasing drastically. Tests on prototype vehicles become then critical, both for time and cost. Reducing them with earlier engine test bench procedures is an up-to-date challenge for car manufacturers and suppliers. Some commercial or internal tools exist to generate a driving cycle on engine test bench. However, one should be able to measure dynamically pollutant emissions during these cycles, especially engine-out emissions in the view to estimate the engine potential and design the after treatment system.
X