In sheet metal painting for various applications like Tractor, Automobile, most attractive coating is metallic paints and it is widely applied using 3 coats 2 bake or 3 coat 1 bake technology. Both options, results in high energy consumption, higher production throughput time & lower productivity in manufacturing process. During various brainstorming & sustainable initiatives, paint application process was identified for alternative thinking to reduce burden on environment & save energy. Various other industry benchmarking & field performance requirement studies helped us identify the critical to quality parameters. We worked jointly with supplier to develop mono-coat system without compromising the performance & aesthetical properties. This results in achieving better productivity, elimination of two paint layers, substantial reduction in volatile organic content, elimination of one baking cycle and energy saving.
Plastics are prone to photo oxidative and thermal oxidative degradation under usage conditions due to their chemical nature. From sustainability and cost standpoint, there is an increasing focus on Mold-In-Color (MIC) plastic materials. Simultaneously customer’s expectations on the perceived quality of these MIC parts has been increasing with attractive color and glossy appearance. A study was conducted to analyze the product quality and durability aspects over a prolonged exposure to accelerated weathering condition. Material selected for this study were injection molded specimens of ABS and PC/ABS used in automotive passenger vehicles.
Reliability states the degree to which the result of a measurement, calculation, or specification can be depended on to be accurate. And, tests according to GMW specifications represents a minimum of 15 years of vehicle life time with defined Reliability and Confidence level. In this work, actual number of thermal cycles for Thermal Fatigue tests (Thermal Shock and Power Temperature Cycle) are calculated for Copper Wire whose Coffin Manson exponent is 5. Overstressing the PEPS Antenna under thermal fatigue requirement (defined number of thermal cycles based on Reliability and Confidence requirements) will lead to broken Copper wire which will result in component’s functional failure and thus impossible to continue reliability testing. The objective of this paper is to determine thermal fatigue requirements for Antenna’s Copper wire whose Coffin Manson exponent is 5.
Graphite plays a crucial role in friction materials, since it has good thermal conductivity, lubricity and act as a friction modifier. The right type, amount, shape and size of the particles control the performance of the brake-pads. In this study, particles of synthetic graphite produced in a unique highly controlled graphitization process were selected to develop NAO- Cu-free brake-pads. The four types of pads had identical composition except variation in average particle size of the graphite (60 µm, 120 µm, 200 µm and 400 µm). Physical, mechanical and chemical characterization of the developed brake-pads was done. Tribological performance was studied using a full- scale inertia brake dynamometer following a Japanese automobile testing standard (JASO C406) and noise studies were done on reduced scale prototype following SAE J2521 standard.
Particulate Matter from Euro 6 Medium Duty diesel engine was analyzed from engine-out, downstream of particulate filter (DPF), and up to the exit of a selective catalytic reactor (SCR) to characterize its chemical and physical nature. Particular attention was devoted to the analysis of particles down to 23 nm. An array of chemical, physical and spectroscopic techniques (Gas chromatography coupled with mass spectrometry (GC-MS), mobility analyzer, UV-visible absorption and fluorescence spectroscopy) was applied for characterizing the organic particulate matter (PM, constituted of polycyclic aromatic hydrocarbons (PAH), heavy aromatic compounds, soot) in the exhaust. The engine was operated at “full-load” (100% of the total power, representing the best performance of the engine operation) condition, and at different engine speeds. Results showed that the DPF efficiency was greater than 96% in the reduction of the sub 23 nm particles across the speeds range.
The transient heat transfer behavior of a real size automotive catalytic reactor has been simulated with OpenFOAM in 1D. The model takes into consideration the gas-solid convective heat transfer, axial wall conduction and heat capacity effects in the solid phase, but also the chemical reactions of CO and C3H6 oxidations, based on simplified Arrhenius and Langmuir-Hinshelwood approaches. The associated parameters have been chosen based on the tuning of experimental data. The impact of different initial catalytic converter temperatures, inlet flow temperatures and inlet flow rates have been quantified, even in terms of overall cumulative emissions. . A dimensional analysis is proposed and dimensionless temperature difference and space-time coordinate are defined. Using this suitably modified coordinates, for the case of negligible axial solid conduction, computed solid temperature at the reactor outlet lay on the typical S-curve.
In this paper, computation fluid dynamics (CFD) simulations are performed to describe the effect of in-cylinder flow structures on the formation and oxidation of soot in a swirl-supported light-duty diesel engine. The focus of the paper is on the effect of swirl motion and injection pressure on late cycle soot oxidation. The structure of the flow at different swirl numbers is studied to investigate the effect of varying swirl number on the coherent flow structures. These coherent flow structures are studied to understand the mechanism that leads to efficient soot oxidation in late cycle. Effect of varying injection pressure at different swirl numbers and the interaction between spray and swirl motions are discussed. The complexity of diesel combustion, especially when soot and other emissions are of interest, requires using a detailed chemical mechanism to have a correct estimation of temperature and species distribution.
This SAE Aerospace Standard (AS) establishes guidelines for the use of IEEE-1394-2008 Beta (formerly IEEE-1394b) as a data bus network in military and aerospace vehicles. It encompasses the data bus cable and its interface electronics for a system utilizing S400 over copper medium over extended lengths. This document contains extensions/restrictions to “off-the-shelf” IEEE-1394 standards, and assumes that the reader already has a working knowledge of IEEE-1394. This document does not identify specific environmental requirements (electromagnetic compatibility, temperature, vibration, etc.); such requirements will be vehicle-specific and even LRU-specific. However, the hardware requirements and examples contained herein do address many of the environmental conditions that military and aerospace vehicles may experience. One should refer to the appropriate sections of MIL-STD-461E for their particular LRU, and utilize handbooks such as MIL HDBK-454A and MIL-HDBK-5400 for guidance.
Every winter, northern airport operations are disrupted by heavy snowstorms and freezing precipitations. A simple snow accumulation or a thin layer of ice can affect aircraft operations (take-off, landing and taxi), and increase the risk for passengers and crew members, by rendering the runway slippery. Any deficits in deicing operations can also lead to flight delays and even cancellations that cost a lot to the industry. In order to maintain the runway and taxiway in a safe and useable condition, airport authorities use mechanical tools, but also chemical products. Chemical products available on the market for use in airports are principally in solid forms and liquid form, and are denominated as Runway Deicing Product (RDP).