Refine Your Search

Topic

Author

Affiliation

Search Results

Training / Education

Vehicle Dynamics for Passenger Cars and Light Trucks

2021-09-20
This seminar will present an introduction to Vehicle Dynamics from a vehicle system perspective. The theory and applications are associated with the interaction and performance balance between the powertrain, brakes, steering, suspensions and wheel and tire vehicle subsystems. The role that vehicle dynamics can and should play in effective automotive chassis development and the information and technology flow from vehicle system to subsystem to piece-part is integrated into the presentation. Governing equations of motion are developed and solved for both steady and transient conditions.
Training / Education

Applied Vehicle Dynamics

2021-04-19
Take notes! Take the wheel! There is no better place to gain an appreciation for vehicle dynamics than from the driver’s seat. Spend three, intense days with a world-renowned vehicle dynamics engineer and SAE Master Instructor, his team of experienced industry engineers, and the BMW-trained professional driving instructors. They will guide you as you work your way through 12 classroom modules learning how and why vehicles go, stop and turn. Each classroom module is immediately followed by an engaging driving exercise on BMW’s private test track.
Technical Paper

Wall Heat Flux on Impinging Diesel Spray Flame: Effect of Hole Size and Rail Pressure under Similar Injection Rate Condition

2020-10-30
2020-32-2313
The fuel economy of recent small size DI diesel engines has become more and more efficient. However, heat loss is still one of the major factors contributing to a substantial amount of energy loss in engines. In order to a full understanding of the heat loss mechanism from combustion gas to cylinder wall, the effect of hole size and rail pressure under similar injection rate conditions on transient heat flux to the wall were investigated. Using a constant volume vessel with a fixed impingement wall, the study measured the surface heat flux of the wall at the locations of spray flame impingement using three thin-film thermocouple heat-flux sensors. The results showed that the characteristic of local heat flux and soot distribution was almost similar by controlling similar injection rate except for the small nozzle hole size with increasing injection pressure.
Technical Paper

Investigations on NOx and Smoke Emissions Reduction Potential through Diesel-Water Emulsion and Water Fumigation in a Small Bore Diesel Engine

2020-10-30
2020-32-2312
In the present work, a relative comparison of addition of water to diesel through emulsion and fumigation methods is explored for reducing oxides of nitrogen (NOx) and smoke emissions in a production small bore diesel engine. The water to diesel ratio was kept the same in both the methods at a lower concentration of 3% by mass to avoid any adverse effects on the engine system components. The experiments were conducted at a rated engine speed of 1500 rpm under varying load conditions. A stable water-diesel emulsion was prepared using a combination of equal proportions (1:1 by volume) of Span 80 and Tween 80. The mixture of Span 80 in diesel and Tween 80 in water was homogenized using an IKA Ultra Turrax homogenizer with tip stator diameter 18mm at 5000 rpm for 2 minutes. The water-in-diesel emulsions thus formulated were kinetically stable and appeared translucent. No phase separation was observed on storage for approximately 105 days.
Technical Paper

Design of Baja SAE Gearbox for Optimal Performance and Minimum Weight

2020-10-30
2020-32-2311
Baja SAE is an intercollegiate competition where teams design and build a single-seat off-road vehicle that is powered by a small 10 HP Briggs & Stratton engine. Due to this power constraint, it is crucial to optimize the vehicle's weight and performance. The purpose of this paper is to demonstrate the process of simulating, designing, manufacturing, and testing the gearbox of the vehicle. The design process began by creating a vehicle dynamics simulation, which included engine performance, CVT Shifting, tire slipping, vehicle mass, rotational inertia, air drag, rolling resistance, weight shift, and drivetrain efficiency. These calculations predicted acceleration times, top speed, and optimal gear ratio. An often-neglected parameter that was analyzed was the rotational inertia in the drivetrain system. The results showed the effective mass of the vehicle increased 12% above the weight of the vehicle, primarily due to the weight and size of the CVT primary pulley.
Technical Paper

Transitioning from IC Engine to Electric Vehicle: An Optimized Wheel End Solution

2020-10-05
2020-01-1632
This paper discusses the change in vehicle parameters when moving from a conventional internal combustion engine to electric motor. It discusses the impact on the wheel end bearings. Typically these include higher GAWRs (Gross Axle Weight Rating) at lower center of gravity heights. These changes require bearings to handle higher loads. Typically, larger loads will increase the bearing size and with it the mounting interface dimensions to auxiliary components. Timken demonstrates an alternative bearing design that can handle higher vehicle GAWRs but would allow for continuity in the surrounding brake corner components – saving OEMs significant design costs and delays.
Technical Paper

A Full-System Approach to Maximise Energy Efficiency of a Wheel Bearing

2020-10-05
2020-01-1631
Environmental sustainability is morphing Automotive technical development strategies and driving the evolution of vehicles with a speed and a strength hardly foreseeable a decade ago. The entire vehicle architecture is impacted, and energy efficiency becomes one of the most important parameters to reach goals, which are now not only market demands, but also based on regulatory standards with penalty consequences. Therefore, rolling drag from all bearings in multiple rotating parts of the vehicle needs to be reduced; wheel bearings are among the biggest in size regardless of the powertrain architecture (ICE, Hybrid, BEV) and have a significant impact. The design of wheel bearings is a complex balance between features influencing durability, robustness, vehicle dynamics, and, of course, energy efficiency.
Technical Paper

Pre-Curve Braking Planning of Battery Electric Vehicle based on Vehicle Infrastructure Cooperative System

2020-10-05
2020-01-1643
Braking energy recovery is an important method for Battery Electric Vehicle (BEV) to save energy and increase driving range. Vehicle braking system performs regenerative braking control based on driver operations. Different braking operations have a significant impact on energy recovery efficiency. This paper proposes a method for planning the braking process of a BEV based on Intelligent Vehicle Infrastructure Cooperative System (IVICS). By actively planning the braking process, the braking energy recovery efficiency is improved. Vehicles need to decelerate and brake before entering a curve. The IVICS is used to obtain information about the curve section in front of the vehicle's driving route. Then calculating the reference speed of the curve, and obtaining the vehicle's braking target in advance, so as to actively plan the vehicle braking process.
Technical Paper

Enclosure-In-Chamber Setup to Achieve Near-Zero Background Concentrations for Brake Emissions Testing

2020-10-05
2020-01-1634
Measuring brake emission is still a challenging non-standardized task. Extensive research is ongoing. Updates of work in progress are presented at SAE Brake Colloquium and PMP meetings. However, open items include how to achieve lower background concentration and how to design the brake enclosure. A low background concentration is essential as brake events are short and some emit in the range of reported background levels. Hence these emissions are difficult to distinguished from the background level. Even more critical, a high background concentration can result in a wrong particle number emissions value, either overestimated, background counted as emissions, or underestimated, background level subtracted, and low emission events no longer detected and counted. However, reducing the background level to less than 100 #/cm³ appeared to be quite challenging.
Technical Paper

On Prediction of Automotive Clutch Torsional Vibrations

2020-09-30
2020-01-1508
Automotive clutches are prone to rigid body torsional vibrations during engagement, a phenomenon referred to as take-up judder. This is also accompanied by fore and aft vehicle motions. Aside from driver behaviour in sudden release of clutch pedal (resulting in loss of clamp load), and type and state of friction lining material, the interfacial slip speed and contact temperature can significantly affect the propensity of clutch to judder. The ability to accurately predict the judder phenomenon relies significantly on the determination of operational frictional characteristics of the clutch lining material. This is dependent upon contact pressure, temperature and interfacial slip speed. The current study investigates the ability to predict clutch judder vibration with the degree of complexity of the torsional dynamics model. For this purpose, the results from a four and nine degrees of freedom dynamics models are compared and discussed.
Technical Paper

Research on the Subjective Rating Prediction Method for the Ride Comfort with Deep Learning

2020-09-30
2020-01-1566
Suspension is an important chassis part which is vital to ride comfort. However, it is difficult to achieve our targeted comfortability level in a short time. Therefore, improving efficiency of damper development is our primary challenge. We have launched a project which aims to reduce the workload on developing dampers by introducing analytical approaches to the improvement of ride comfort. To be more specific, we have been putting effort into developing subjective rating prediction, vehicle dynamics prediction, the damping force prediction. This paper describes the subjective rating prediction method which output a subjective rating corresponding to the physical value of the vehicle dynamics with Deep Learning. As a result of verifying with the unlearning data, DNN(Deep Neural Network) prediction method could almost predict the subjective rating of the expert driver.
Technical Paper

A Generic Testbody for Low-Frequency Aeroacoustic Buffeting

2020-09-30
2020-01-1515
Raising demands towards lightweight design paired with a loss of originally predominant engine noise pose significant challenges for NVH engineers in the automotive industry. From an aeroacoustic point of view, low frequency buffeting ranks among the most frequently encountered issues. The phenomenon typically arises due to structural transmission of aerodynamic wall pressure fluctuations and/or, as indicated in this work, through rear vent excitation. A possible workflow to simulate structure-excited buffeting contains a strongly coupled vibro-acoustic model for structure and interior cavity excited by a spatial pressure distribution obtained from a CFD simulation. In the case of rear vent buffeting no validated workflow has been published yet. While approaches have been made to simulate the problem for a real-car geometry such attempts suffer from tremendous computation costs, meshing effort and lack of flexibility.
Technical Paper

Asian Consumers Challenging the NVH Performance of European Cars – Implications on the Product Development in the 2020ies

2020-09-30
2020-01-1552
Sales of SUV and luxury cars on the largest market of the world – China – are growing at a high rate. The highways in large cities like Beijing or Shanghai are increasingly populated with cars from all over the world like Japan, USA, Europe and Korea and even some refined domestic brands. More than 10 million rich people can afford those cars and are skilled drivers. This huge group of potential consumers is targeted by luxury brand OEMs and by startup companies. It has been understood, that these people have a strong attitude towards comfort. The twistbeam rear axle was replaced by multilink, double clutch transmissions were improved by comfort-mode drive programs, interior trims raised to Western standard performance levels, tyres specially developed for comfort in China, localized insulation materials and packages engineered to a one vehicle class higher level.
Technical Paper

Experimental Investigation on the Effects of Cooled Low Pressure EGR and Water Injection on Combustion of a Turbocharged GDI Engine

2020-09-27
2020-24-0003
This work focuses on the effects of cooled Low Pressure EGR and Water Injection observed by conducting experimental tests consisting mainly of Spark Advance sweeps at different cooled LP-EGR and WI rates. The implications on combustion and main engine performance indexes are then analysed and modelled with a control-oriented approach, showing that combustion duration and phase and exhaust gas temperature are the main affected parameters. Results show that cooled LP-EGR and WI have similar effects, being the associated combustion speed decrease the main cause of exhaust gas temperature reduction. Experimental data is used to identify control-oriented polynomial models able to capture the effects of LP-EGR and WI on both these aspects. The limitations of LP-EGR are also explored, identifying maximum compressor volumetric flow and combustion stability as the main ones.
Event

Promotional Toolkit - Attend - Heavy-Duty Diesel Emissions Control Symposium - Promotional Toolkit - Attend - Heavy-Duty Diesel Emissions Control Symposium

2020-09-26
Innovative and enquiring specialists gather together 2020 SAE International Heavy-Duty Diesel Emissions Control Symposium (HDD) expand their knowledge collaborate most promising new technologies: emission control strategies, in-service maintenance, retro-fitting exhaust after-treatment equipment, global harmonization emission standards, regulatory activities
X