Refine Your Search

Topic

Author

Affiliation

Search Results

Training / Education

AS13003 Measurement System Analysis (MSA) Requirements for Aerospace Engine Supplier Quality

2021-06-30
AS 13003:2015 stipulates requirements to establish an acceptable measurement system (for variable and attribute features) for use on aerospace engines parts and assemblies. Measurement Systems Analysis (MSA) is used to evaluate and improve measurement systems in the workplace because it evaluates the test method, measuring instruments, and the process of acquiring measurements. The Aerospace Engine Supplier Quality (AESQ) Strategy Group published AS13003 to define the minimum requirements for conducting MSA for variable attribute assessment on characteristics as defined on the drawing specification.
Training / Education

AS13000 8D Problem Solving Requirements for Suppliers

2020-11-02
AS13000 defines the Problem-Solving standard for suppliers within the aero-engine sector, with the Eight Disciplines (8D) problem solving method the basis for this standard. This two-day course provides attendees with a comprehensive and standardized set of tools to become an 8D practitioner and meets all the requirements of the training syllabus in AS13000. Successful application of 8D achieves robust corrective and preventive actions to reduce the risk of repeat occurrences and minimize the cost of poor quality.
Technical Paper

Wall Heat Flux on Impinging Diesel Spray Flame: Effect of Hole Size and Rail Pressure under Similar Injection Rate Condition

2020-10-30
2020-32-2313
The fuel economy of recent small size DI diesel engines has become more and more efficient. However, heat loss is still one of the major factors contributing to a substantial amount of energy loss in engines. In order to a full understanding of the heat loss mechanism from combustion gas to cylinder wall, the effect of hole size and rail pressure under similar injection rate conditions on transient heat flux to the wall were investigated. Using a constant volume vessel with a fixed impingement wall, the study measured the surface heat flux of the wall at the locations of spray flame impingement using three thin-film thermocouple heat-flux sensors. The results showed that the characteristic of local heat flux and soot distribution was almost similar by controlling similar injection rate except for the small nozzle hole size with increasing injection pressure.
Technical Paper

Investigations on NOx and Smoke Emissions Reduction Potential through Diesel-Water Emulsion and Water Fumigation in a Small Bore Diesel Engine

2020-10-30
2020-32-2312
In the present work, a relative comparison of addition of water to diesel through emulsion and fumigation methods is explored for reducing oxides of nitrogen (NOx) and smoke emissions in a production small bore diesel engine. The water to diesel ratio was kept the same in both the methods at a lower concentration of 3% by mass to avoid any adverse effects on the engine system components. The experiments were conducted at a rated engine speed of 1500 rpm under varying load conditions. A stable water-diesel emulsion was prepared using a combination of equal proportions (1:1 by volume) of Span 80 and Tween 80. The mixture of Span 80 in diesel and Tween 80 in water was homogenized using an IKA Ultra Turrax homogenizer with tip stator diameter 18mm at 5000 rpm for 2 minutes. The water-in-diesel emulsions thus formulated were kinetically stable and appeared translucent. No phase separation was observed on storage for approximately 105 days.
Technical Paper

Enclosure-In-Chamber Setup to Achieve Near-Zero Background Concentrations for Brake Emissions Testing

2020-10-05
2020-01-1634
Measuring brake emission is still a challenging non-standardized task. Extensive research is ongoing. Updates of work in progress are presented at SAE Brake Colloquium and PMP meetings. However, open items include how to achieve lower background concentration and how to design the brake enclosure. A low background concentration is essential as brake events are short and some emit in the range of reported background levels. Hence these emissions are difficult to distinguished from the background level. Even more critical, a high background concentration can result in a wrong particle number emissions value, either overestimated, background counted as emissions, or underestimated, background level subtracted, and low emission events no longer detected and counted. However, reducing the background level to less than 100 #/cm³ appeared to be quite challenging.
Technical Paper

Transient Heat Transfer Simulation and Buckling Analysis of Disc Brakes in In-Wheel Motor Driven Vehicles

2020-10-05
2020-01-1618
High temperature distribution in disc brake mounted within in-wheel motor driven vehicle has several negative effects on braking performance. This is mainly due to the enclosed nature of the braking system. This paper aims to determine the effect of contact geometry on temperature distribution and thermal buckling in such a brake. Numerical analysis is conducted to investigate the variation of temperature field on the brake disc at different cover angles of pads while maintaining the same moment of friction. The effect of different radial positions of the pads is a second consideration in the current work, using a transient modeling approach. To validate the simulation results, an approximate, analytical solution is derived according to energy conservation. The results show that, for the same work done by the pads, the maximum temperature on the disc increases with a decrease in the pad cover angle.
Technical Paper

Potentials and Challenges of a Brake Particle Emission Collecting System

2020-10-05
2020-01-1635
Brake particle emissions as a part of non-exhaust emissions are becoming more and more relevant, various international research activities can be stated. Also from the legislation side, first hints are given in regards of possible regulations. One possible approach for the reduction of brake particle emissions deals with the collection of those particles close to the foundation brake. The presented paper will follow such an approach and give some insights. In a first step, the technical layout is described for bench and vehicle testing. While for bench testing a PMP-like style of the setup could be chosen, the vehicle test setup is oriented on conventional wheel dust measurements. Hence, presented results of laboratory testing are dealing with PN and PM measurements. Also the impact on particle size distribution is discussed. It can be stated, that the particle collecting system is able to improve PN and PM emissions. Additionally, ultra-fine particles are almost eliminated.
Technical Paper

A Priori Analysis of Acoustic Source Terms from Large-Eddy Simulation in Turbulent Pipe Flow

2020-09-30
2020-01-1518
The absence of combustion engine noise pushes increasingly attention to the sound generation from other, even much weaker, sources in the acoustic design of electric vehicles. The present work focusses on the numerical computation of flow induced noise, typically emerging in components of flow guiding devices in electro-mobile applications. The method of Large-Eddy Simulation (LES) represents a powerful technique for capturing most part of the turbulent fluctuating motion, which qualifies this approach as a highly reliable candidate for providing a sufficiently accurate level of description of the flow induced generation of sound.
Technical Paper

A Generic Testbody for Low-Frequency Aeroacoustic Buffeting

2020-09-30
2020-01-1515
Raising demands towards lightweight design paired with a loss of originally predominant engine noise pose significant challenges for NVH engineers in the automotive industry. From an aeroacoustic point of view, low frequency buffeting ranks among the most frequently encountered issues. The phenomenon typically arises due to structural transmission of aerodynamic wall pressure fluctuations and/or, as indicated in this work, through rear vent excitation. A possible workflow to simulate structure-excited buffeting contains a strongly coupled vibro-acoustic model for structure and interior cavity excited by a spatial pressure distribution obtained from a CFD simulation. In the case of rear vent buffeting no validated workflow has been published yet. While approaches have been made to simulate the problem for a real-car geometry such attempts suffer from tremendous computation costs, meshing effort and lack of flexibility.
Technical Paper

Innovative Acoustic Material Concept Integration Into Vehicle Design Process

2020-09-30
2020-01-1527
Integration of acoustic material concepts into vehicle design process is an important part of full vehicle design. The ability to assess the acoustic performance of a particular sound package component early in the design process allows designers to test various designs concepts before selecting a final products. This paper describes an innovative acoustic material concept which is easily integrated in a design process through the use of a database of Biot parameters. Biot parameters are widely used in the automotive industry to describe the physical interactions between the acoustics waves travelling through foams, fibers or metamaterials and the solid and fluid phase of these poro-elastic materials. This new acoustic material concept provides a combination of absorption, transmission loss and added damping on the panel it is attached to.
Technical Paper

Inter-Laboratory Characterization of Biot Parameters of Poro-Elsastic Materials for Automotive Applications

2020-09-30
2020-01-1523
Automotive suppliers provide multi-layer trims mainly made of porous materials. They have a real expertise on the characterization and the modeling of poro-elastic materials. A dozen parameters are used to characterize the acoustical and elastical behavior of such materials. The recent vibro-acoustic simulation tools enable to take into account this type of material but require the Biot parameters as input. Several characterization methods exist and the question of reproducibility and confidence in the parameters arises. A Round Robin test was conducted on three poro-elastic material with four laboratories. Compared to other Round Robin test on the characterization of acoustical and elastical parameters of porous material, this one is more specific since the four laboratories are familiar with automotive applications. Methods and results are compared and discussed in this work.
Technical Paper

Study of the Glass Contribution to the Interior Acoustics of a Car and Related Countermeasures

2020-09-30
2020-01-1585
This paper shows that the collaboration between a glass manufacturer and a passive acoustic treatment manufacturer can bring different benefits and considerably improve the interior acoustics of a vehicle. In terms of passenger safety and well-being, glazing have always played a key role by offering solutions to interior comfort, particularly when it comes to heat and acoustics. Today, cars are becoming a living space which from an acoustic point of view brings a challenge for the interior comfort. Indeed, glazing has no absorption and classically it has an acoustic insulation weakness around its coincident frequency. In most of the cases, these different aspects make glazing one of the main contributors to the sound pressure level in the passenger compartment, and the trend is not one of change. However, there are possible countermeasures. One of which is the use of laminated glazing with acoustic PVB.
Training / Education

AS9145 Requirements for Advanced Product Quality Planning and Production Part Approval

2020-09-28
Production and continual improvement of safe and reliable products is key in the aviation, space and defense industries. Customer and regulatory requirements must not only be met, but they are typically expected to exceeded requirements. Due to globalization, the supply chain of this industry has been expanded to countries which were not part of it in the past and has complicated the achievement of requirements compliance and customer satisfaction. The IAQG has established and deployed the AS9145 Standard, as a step to help achieve these objectives.
Technical Paper

A Simulation Study Assessing the Viability of Shifting the Location of Peak In-Cylinder Pressure in Motored Experiments

2020-09-27
2020-24-0009
Some hybrid powertrains utilize an engine to benefit from the power density of the liquid fuel while the electric machine; for transient needs, for very low loads and where legislation prohibits any gaseous and particulate emissions. Consequently, the operating drive cycle of an engine also shifted from its conventional, broad range of speed and load to a narrower operating range of high thermal efficiency. This requires a drastic departure from conventional engine architecture, meaning that analytical models used to predict the behaviour of the engines early in the design cycle are no longer always applicable. Friction models are an example of sub-models which struggle with previously unexplored engine architectures. The pressurized motored method has proven to be a simple experimental setup which allows a robust FMEP determination against which engine friction simulation can be fine-tuned.
Technical Paper

Experimental Investigation on the Effects of Cooled Low Pressure EGR and Water Injection on Combustion of a Turbocharged GDI Engine

2020-09-27
2020-24-0003
This work focuses on the effects of cooled Low Pressure EGR and Water Injection observed by conducting experimental tests consisting mainly of Spark Advance sweeps at different cooled LP-EGR and WI rates. The implications on combustion and main engine performance indexes are then analysed and modelled with a control-oriented approach, showing that combustion duration and phase and exhaust gas temperature are the main affected parameters. Results show that cooled LP-EGR and WI have similar effects, being the associated combustion speed decrease the main cause of exhaust gas temperature reduction. Experimental data is used to identify control-oriented polynomial models able to capture the effects of LP-EGR and WI on both these aspects. The limitations of LP-EGR are also explored, identifying maximum compressor volumetric flow and combustion stability as the main ones.
Technical Paper

Three-dimensional Tolerance stack utilizing Cetol:Its Importance & usage

2020-09-25
2020-28-0495
Tolerance stack ups are vital to achieve mechanical fit, assembly and performance requirements in any product. Mechanical fit ensures the parts building up the assembly always fit with each other and achieve mechanical performance requirements (can include either performance of a mechanism like actuators, switches etc. or performance of equipment or machines). Tolerance stack up is a technique which calculates the collective effect of part tolerances considering assembly requirement. The logic behind this method is adding tolerances to find total part tolerance and then comparing it with the performance limits (available gap). This allows us to check whether our assembly would work according to the design needs. This comparison, also known as worst case analysis is normally useful for problems involving less numbers of parts and mostly in 1-D.
Technical Paper

Effect of Hybrid Nano additives on Performance and Emission Characteristics of a Diesel Engine fueled with Waste Cooking Oil Biodiesel

2020-09-25
2020-28-0521
The search for a new renewable biofuel and aiming to make the environment clean is always a challenge for a researcher in developing a sustainable fuel for future mobility. In this context, vegetable oils are found as good alternative biofuels for diesel engines as they are biodegradable and renewable in nature. Most of the physio-chemical properties of vegetable oils are very closer to diesel. However, pure vegetable oils are expensive and using them to operate the diesel engine may affect the food supply chain. In view of this limitation, Waste Cooking Oil Methyl Ester (WCOME) derived from waste cooking oil is found to be very attractive solution for the above said constraints as they are easily available, renewable, economically and environmentally viable. This research aims at studying the effect of hybrid nano additives (i.e. Copper Oxide with Zinc Oxide) on performance and emission characteristics of a diesel engine fueled with Waste Cooking Oil Methyl Ester.
Technical Paper

Design and analyse of air intake in manifold student formula vehicle

2020-09-25
2020-28-0485
The SAE organization constrained a rule to place a restrictor of diameter 20mm in between the throttle body and the engine inlet . The restrictor is an component which reduces and regulates the mass flow of air into the engine inlet. For this a venture nozzle will be used as a restrictor in vehicle to decrease the air pressure and increase the velocity in the intake manifold . The aim of our proposed work is to minimize the pressure drop by changing the convergent and divergent angles in the restrictor. For this by using solidworks sixteen various models with convergent angle as 11,13,15,17 degrees and divergent angle as 3,5,7,9 degrees was designed and analysed using CFD fluent in ansys work bench. In this 13 degree as convergent and 5 degree as divergent model was found to have laminar air flow through out with optimum pressure drop. The plenum is a large duct which equalise the pressure drop caused by restrictor in order to improve the efficiency of engine.
Technical Paper

Modeling and Simulation of A Fighter Aircraft Cabin Temperature Control System Using Amesim

2020-09-25
2020-28-0497
Environmental Control System (ECS) of an aircraft is a complex system which operates classically in an air standard refrigeration cycle. ECS controls the temperature, pressure and flow of supply air to the cockpit, cabin or occupied compartments. The air cycle system of ECS takes engine bleed air as input. Parameters like bleed air pressure and temperature, mass flow, the external factors like ambient temperature, pressure, and aircraft attitude affect the performance of ECS to a large extent especially during transient. So, it is very important to consider the transient characteristics of these parameters in the design stage itself in order to ascertain the dynamic response of the system. This paper explains in detail the importance of transient input characteristics during the detailed design of ECS. A typical temperature control scheme for combat aircraft ECS has been studied and modeled in LMS AMESim.
Technical Paper

Ergonomic study of occupant seating using near-vertical posture for shared mobility applications

2020-09-25
2020-28-0519
Transportation system is at the brink of revolution and many new ways of mobility are arising in the market to ease the pressure on the established transportation infrastructure. Many companies and government around the world are exploring innovative options in the space of shared mobility to reduce the overall carbon footprint. To expedite the adoption of shared mobility based travelling options in India, it is necessary to make such options comfortable and cost-effective. To make the mobility option cost-effective, it is important to comfortably allow as many passengers per vehicle foot-print as possible. This paper aims to evaluate a novel method of occupant seating to maximize the number of passages the vehicle cabin can accommodate. Since shared mobility options are used for a short duration of commute, the comfort of the seat can be compromised for increasing the no. of occupants. This paper studies the relation between occupant comfort and the inclination of seat cushion.
X