Search Results

A highly modified F/A-18 aircraft is being used to demonstrate that aeroelastic wing twist can be used to roll a high performance aircraft. A production F/A-18A/B/C/D aircraft uses a combination of aileron deflection, differential horizontal tail deflection and differential leading edge flap deflection to roll the aircraft at various Mach numbers and altitudes. The Active Aeroelastic Wing program is demonstrating that aeroelastic wing twist can be used in lieu of the horizontal tail to provide autonomous roll control at high dynamic pressures. Aerodynamic and loads data have been gathered from the Phase I AAW flight test program. Now control laws have been developed to exploit aeroelastic wing twist and provide autonomous flight control of the AAW aircraft during Phase II. Wing control surfaces are being deflected in non-standard ways to create aeroelastic wing twist and develop the required rolling moments without use of the horizontal tail.

An investigation was conducted to determine the low speed aerodynamic characteristics of a 9-in. diameter laser Lightcraft. The vehicle rotational velocity and deflection angle were varied to determine the effects on the Lightcraft’s aerodynamic performance. For the case of zero deflection angle, it was observed that the rotational velocity has no effect on the aerodynamic coefficients, with the drag coefficient remaining constant at 0.51. However, the aerodynamic center appeared to move aft when the model was rotated at higher velocities. For a yaw angle of 25° the lift and drag coefficients remained constant at 0.0 and 0.60, respectively, while the effects of rotation manifested themselves in the side force coefficient.

As part of the DoD/NASA Lithium-Ion and More-Electric Aircraft (MEA) development programs, in-house life-testing and performance characterization of lithium-ion batteries of sizes 1-20 amp-hours (Ah) were performed. Using AC impedance spectroscopy, the impedance behavior of lithium-ion cells with respect to temperature, cycle number, electrode, and state-of-charge was determined. Cell impedance is dominated by the positive (cathode) electrode, increases linearly with cycle number, and exponentially increases with decreasing temperature. From cell performance testing, we have seen the cell behavior is extremely sensitive to the ambient temperature. Preliminary battery performance results as well as AC impedance and life cycle test results are presented below.

The performance and life of lithium-ion batteries is highly dependent on factors such as temperature, charge/ discharge rate, depth-of-discharge (DOD), charge cut-off voltage, and battery design. The purpose of this on-going investigation is to characterize the state-of-the-art in lithium-ion battery performance and life as a function of some of these factors. Cycle life data on 18650 cells as well as a four cell series connected 20 Ahr lithium-ion battery (16.4 volt) is presented. External cell temperatures as a function of discharge rate and location for 20 Ahr lithium-ion cell are given. Preliminary ac impedance results for the 20 Ahr cell are also given.

Two compact intercoolers are designed for the Rotax 914 aircraft engine to increase engine power and avoid engine knock. A study is performed to investigate the effects of unsteady airflow on intercooler performance. Both intercoolers use air-to-liquid cross flow heat exchangers with staggered fins. The intercoolers are first tested by connecting the four air outlets of the intercooler to a common restricted exit creating a constant back pressure which allows for steady airflow. The intercoolers are then tested by connecting the four air outlets to a 2.4 liter, 4 cylinder engine head and varying the engine speed from 6000 to 1200 RPM corresponding to decreasing flow steadiness. The test is performed under average flight conditions with air entering the intercooler at 180°F and about 5 psig. Results from the experiment indicate that airflow unsteadiness has a significant effect on the intercooler's performance.