Search Results

Developing the most advanced wing panel assembly line for very high production rates required an innovative and integrated solution, relying on the latest technologies in the industry. Looking back at over five decades of commercial aircraft assembly, a clear and singular vision of a fully integrated solution was defined for the new panel production line. The execution was to be focused on co-developing the automation, tooling, material handling and facilities while limiting the number of parties involved. Using the latest technologies in all these areas also required a development plan, which included pre-qualification at all stages of the system development. Planning this large scale project included goals not only for the final solution but for the development and implementation stages as well. The results: Design/build philosophy reduced project time and the number of teams involved. This allowed for easier communication and extended development time well into the project.

One recent evolution in commercial transport structure has been the emergence of monolithic structure applications. Monolithic structure reduces the number of parts that must be managed, eliminates sub-assembly operations and contributes strongly to determinant assembly practices. The cost of three components from the Boeing 737-200 and their counterparts on the Boeing 737-600 will be compared. The mid 1960's 737-200 components were assembled from sheet metal details. The mid 1990's 737-600 components are monolithic designs and utilize superplastic forming, casting and NC machining technologies. The built-up solutions and the monolithic solutions are compared based on cost infrastructures from the 1960's and the 1990's.

Process development work was conducted to develop a machined fuselage frame concept for a small (5 abreast) commercial airplane. To minimize detail fabrication cost and to facilitate lean manufacturing, roll forming was identified as the preferred forming process. To reduce assembly costs, long frame segments were desired to minimize the number of frame splices. Since plate stock is limited to lengths of approximately 3.66 meters (12 feet), formed aluminum extrusions were selected as the raw material form. Roll forming and stretch forming process paths were screened for both J section and rectangular bar extrusions. The post machining distortion produced in formed extrusion and plate hog-out frame segments was compared to each other and to process standards governing allowable fit-up forces. As a result of this process development activity, a producible roll forming process path was developed.

Historically the manufacturing of aircraft fuselages with capacities of 100+ passengers requires large panels and assemblies to be integrated through processes of manipulating them into proper alignment to one another, and then fastening the panels and assemblies together. The manipulating and alignment processes typically incorporate large handling devices and cranes to move the large panels and monolithic tools or measurement alignment systems to precisely align the aircraft components. After the individual panels and assemblies are properly aligned, they can be fastened together. Normally, the fastening process is performed manually with the aid of fastener location templates. There are problems with these processes. They require high capital investments for tooling and facilities; up to two shifts (16 hours) to complete the loading, indexing, and fastening operations; and depend on a highly skilled and knowledgeable work force to minimize discrepancies.

Determinant Spar Assembly Cell (DSAC) has been developed by Boeing to help reduce the cost of building commercial airplanes. This revolutionary system uses a state of the art 5 axis NC machine in conjunction with quick-change multi-function end effectors and a reconfigurable fixture, to provide the capability to assemble any Boeing heritage commercial airplane spar. This paper describes the high level aspects of this unique system.

This paper presents the latest findings resulting from ongoing research on jet engine ice crystal icing. It specifically focuses on the challenges for pilots to identify and potentially avoid weather associated with this type of engine icing. The case will be made that jet engine power loss and damage events are not only still occurring, but the overall number of events per year is increasing. Several case studies will be presented to illustrate that each event can vary significantly when viewed from the flight deck even though weather conditions are similar for each. Findings will be presented related to new events that are occurring on engines that were not previously affected along with new engine symptoms. Ongoing meteorological research has shed new light on how to identify weather associated with engine events utilizing infrared satellite imagery combined with atmospheric temperature profiles.

An innovative reconfigurable fixture was developed by the Boeing Company to hold spars while performing fastening and drilling operations, reducing cost, maintenance and increasing accuracy.

Current practice for assembly of wing skins to wing stringers utilizes temporary aluminum lock bolts prior to squeeze riveting. Removing and replacing these fasteners is time consuming and hazardous. We have automated the wing riveters to perform this replacement process. This paper discusses the four areas of development that were carried out to accomplish this: tack fastener installation, machine vision system development, drill development and new tooling. Testing results and new findings will be discussed.

In the last several years, the aviation industry has improved its understanding of jet engine events related to the ingestion of ice crystal particles. Ice crystal icing has caused powerloss and compressor damage events (henceforth referred to as “engine events”) during flights of large transport aircraft, commuter aircraft and business jets. A database has been created at Boeing to aid in analysis and study of these engine events. This paper will examine trends in the engine event database to better understand the weather which is associated with events. The event database will be evaluated for a number of criteria, such as the global location of the event, at what time of day the event occurred, in what season the event occurred, and whether there were local meteorological influences at play. A large proportion of the engine events occur in tropical convection over the ocean.

The significant problem of engine power-loss and damage associated with ice crystal icing (ICI) was first formally recognized by the industry in a 2006 publication [1]. Engine events described by the study included: engine surge, stall, flameout, rollback, and compressor damage; which were triggered by the ingestion of ice crystals in high concentrations generated by deep, moist convection. Since 2003, when ICI engine events were first identified, Boeing has carefully analyzed event conditions documenting detailed pilot reports and compiling weather analyses into a database. The database provides valuable information to characterize environments associated with engine events. It provides boundary conditions, exposure times, and severity to researchers investigating the ICI phenomenon. Ultimately, this research will aid in the development of engine tests and ICI detection/avoidance devices or techniques.

This paper discusses the process development and implementation of an Electric Boring process for boring the Frame Lug for the Main Landing Gear (MLG) Swing Link bushing on the 777 Airplane. Due to the process reliability issues associated with the equipment traditionally used for this process, primarily air driven right angle motors, a boring process using electric motors was developed and implemented for this application. The process development focused on equipment selection based on horsepower/torque requirements, laboratory testing for cutting parameters and bore quality generation, equipment reliability testing under operational loads and process efficiency validation. The implementation programme involved the detail design and fabrication of protective enclosure (explosion proof) hardware to prevent the electric motor and its connections from being contaminated by various fluids used in processes in the vicinity of this application.