Search Results

Automotive manufacturers are working towards protecting the global environment by using filters to reduce particulate matter (PM) emissions from their vehicles. There is a growing demand for sensors that detect the small amounts of PM leaking through these filters, as they can aid in performing on-board diagnostics (OBD) and monitoring the function of these filters. Currently, vehicles predominantly use an electric resistance type PM sensor, which applies a voltage between electrodes, collects PM, and senses the generation of PM path. However, in response to tightening regulations on PM-OBD, the response time of the sensor needs to be optimized. Furthermore, the fast response time must not degrade the poisoning resistance in order to ensure durability. To shorten sensor response time, we have developed a 20 μm-gap electrode structure using a cross-section of laminated alumina sheets with printed electrodes, which can form PM paths at small PM amounts.

There has recently been an increasing need in various automotive monitoring and control systems for a simply structured and highly reliable high-pressure sensor to detect the higher pressures of oils, hydraulic fluids, air and air conditioning refrigerants. A simple, newly devised approach to sealing oil filled high-pressure sensors is introduced in this paper. The new structure utilizes a resin instead of the metal and glass conventionally used for hermetic sealing oil filled high-pressure sensors. This is made possible by the combined use of oils with large effective molecular diameters and carefully optimized design of shape and size of the sealing faces between sensor parts. The use of a sealed metal diaphragm allows for extensive use of the sensor with many different kinds of pressure media and in various applications.

Many ICs are used in various electronic components in automotive applications, such as ECUs (electronic control units) and smart actuators. Automotive ICs required the following features: (1) high integration of analog, digital and output devices; (2) high breakdown voltage for analog devices standing the battery voltage; (3) highly accurate control for analog circuits; (4) susceptibility under harsh operating conditions, such as high ambient temperature and high humidity; and (5) high surge immunity such as ESD (electrostatic discharge) robustness. To meet these requirements, we developed analog and output devices with improved surge endurance based on SOI wafer and trench-dielectric-isolation technologies. Analog circuit applications, especially accurate power management or high-precision solenoid driving, demands stable temperature-compensated output. Load dump and battery-jumping also needs high voltage protection and high noise immunity for these devices.

Customers tend to require more comfortable climate control in vehicles. This paper is concern with a new infrared sensor that detects surface temperature at six separate locations, and a climate control system that incorporates the sensor. In a conventional system using an air temperature sensor and solar radiation sensor, climate conditions are usually controlled according to the thermal load. It is believed that more comfortable climate control can be realized by using an infrared sensor to detect passengers' surface temperature. The sensor consists of a lens, an IC with six thermopiles, a circuit and a case, and has been improved to detect in-cabin surface temperature accurately even under severe environmental conditions. The HVAC system controls the outlet air temperature and mode individually for each seat according to detected temperatures.

We have developed a novel wafer process for capacitive sensing accelerometer using surface Micro Electrical Mechanical Systems (MEMS) technology and successfully applied to the fabrication process. Our new process combines with a single crystal SOI (Si on Insulator) wafer, high aspect ratio silicon etching and newly developed anhydrous HF/Alcohol etch process of silicon oxides. Although wet conditions such as HF/water etch occurs stiction of mobile structure, our anhydrous HF/Alcohol etch process technology occurs no stiction of mobile structures, because of gas phase (dry) process. In our process, we have achieved smaller-sized sensor chip compared to our conventional 2 axes accelerometer.

Increased interest in global warming issues requires rapid improvements in reduction of CO2 emissions. The automotive industry is placing high importance on improving fuel economy performance across their entire product lines. Charging Management System is a necessary element towards fuel economy improvement. Many of today's charging management systems perform at least two important functions: improving efficiency based on vehicle motion, and detecting battery state of charge. These systems become more complicated as more components (i.e. generators, current sensors and ECU) and software are added. Therefore, it is difficult to develop charging management systems for an entire product line and difficult to retrofit the system for vehicles already in production. A stand-alone charging management system solves these issues. This system is independent of the other vehicle systems. The software for improving fuel economy is installed in the generator or current sensor.

We propose a novel millimeter wave radar system and object detection algorithm for automobile use by using advanced null scanning method. Generally, null scanning method can achieve a higher resolution and a more compact sensor size compared to beam scanning method, but needs huge computing power. We introduced the theory of forgetting factor into it and developed a new null scan algorithm. It achieved a high lateral object separation ability of less than 3 degree, and a quick response under feasible computing power in simulation and test vehicle. These technologies enable compact and high performance radar for advanced safety system.

We have developed a novel capacitive acceleration sensor fabrication process by applying surface MEMS (Micro Electro-Mechanical System) technology and successfully introduced this process for volume production of a new super slim sensor. The new process uses the ICP-RIE(Inductively Coupled Plasma - Reactive Ion Etching) technology to etch single crystal SOI(Si on Insulator wafers. In this technology, vertical Si etching is followed by, lateral etching along the buried oxide to release the movable electrode. Because of a dry process, the new process does not cause the movable structures to stick to each other. Our process uses only three masks and reduces the sensor chip size to a half that of our conventional capacitive acceleration sensors.

In general, automatic braking uses an electric stability control (ESC) hydraulic unit that can automatically increase the hydraulic pressure in the wheel cylinder (hereinafter called wheel pressure), independent of the driver’s braking operation. The hydraulic unit should have sufficient pressure response to apply autonomous emergency braking (AEB). It was necessary for the hydraulic unit to have a high flow rate for the pressure response. To satisfy the performance requirements of the AEB, a brushless motor, which has a high maximum rotational speed and good response, is adopted for the hydraulic unit. Furthermore, sensorless control, which does not require a rotation angle sensor, has been developed so that the motor size can be small and common to conventional units. The developed sensorless control can switch the driving methods in three states: pre-rotation, low speed, and high speed.

This paper proposes an oil degradation sensor that informs the best time for oil replacement to achieve the right balance with oil conservation and engine protection. We found that free radicals in the engine oil generate by chain decomposition reactions of hydrocarbons by heat and the amount of them increases with an increase in running distance. Based on theoretical analysis and experiment results, the free radical concentrations have high correlations with pH and base number. The sensor using the principle of electron spin resonance (ESR) can measure the amount of free radical molecules in a non-contact method. The sensor successfully detected free radicals produced by the degradation of actual engine oil.

Many accidents occur today when distant objects or roadway impediments are not quickly detected. To help avoid these accidents, longer-range safety systems are needed with real-time detection capability and without requiring a line-of-sight (LOS) view by the driver or sensor. Early detection at intersections is required for obstacle location around blind corners and dynamic awareness of approaching vehicles on intersecting roadways. Many of today's vehicular safety systems require short LOS distances to be effective. Such systems include forward collision warning, adaptive cruise control, and lane keeping assistance. To operate over longer LOS distances and in Non-LOS (NLOS) conditions, cooperative wireless communications systems are being considered. This paper describes field results for LOS and NLOS radio links for one candidate wireless system: 5.9GHz Dedicated Short Range Communications (DSRC).

Driving Automation Systems (DAS) are subject to complex road environments and vehicle behaviors and increasingly rely on sophisticated sensors and Artificial Intelligence (AI). These properties give rise to unique safety faults stemming from specification insufficiencies and technological performance limitations, where sensors and AI introduce errors that vary in magnitude and temporal patterns, posing potential safety risks. The Safety of the Intended Functionality (SOTIF) standard emerges as a promising framework for addressing these concerns, focusing on scenario-based analysis to identify hazardous behaviors and their causes. Although the current standard provides a basic cause-and-effect model and high-level process guidance, it lacks concepts required to identify and evaluate hazardous errors, especially within the context of AI. This paper introduces two key contributions to bridge this gap.

Toyota Motor Corporation has developed a new battery electric vehicle (BEV) on the dedicated e-TNGA platform for BEVs, which was designed to lower the center of gravity of the vehicle and increase body stiffness. In addition to a full-time 4WD system, another feature of this new BEV is its pleasurable driving experience. A new inverter drive unit was developed for this system. Unlike the previous inverter, the advantage of the new inverter is that it is small enough to be mounted inside the transaxle housing, thereby contributing to the availability of interior and luggage space. The temperature rise of the power semiconductors in the inverter was reduced considerably by the development of a new power semiconductor for BEVs. This enables a parallel layout of two power semiconductors instead of three. The components of the inverter were also downsized. A coreless current sensor was adopted, and capacitors were developed with significantly lower capacitance.