Search Results

The recent trend toward the compact and light-weight construction of diesel engines with high power output has been imposing higher requirements of fatigue strength and antiseizure characteristics on bearings. In order to meet these requirements, the authors developed a new bearing alloy of higher fatigue strength for use in heavy load engines, through the analysis of the Al-Zn-Si alloy which has high corrosion resistance. Experimental results of this new alloy to study its physical properties and bearing performances indicate that it can be applied to bearings in diesel engines which operate in harsh conditions.

Recently, there has been a tendency of high power and high speed in automotive engines. In addition they have been also required high reliability. And engine bearings have been required to be advanced in wear resistance as well as seizure resistance. Therefore, copper-lead alloy bearings with overlay, which have better seizure resistance, have been widely used for high speed engines up to the present. But it becomes very important for them to advance the overlay wear resistance. In this paper, the composite overlay is mainly researched to improve wear resistance regarding kind of hard particles and their amounts in the overlay.

The advent of high-performance, compact, and lightweight engines in recent years brings forth a tendency to increase the load for engine bearings and demands on producing even higher levels of durability and reliability in bearing products against fatigue, seizure, wear, and corrosion. Based on the perspective of extending the bearing life, the authors have studied the problems that are encountered with the current three layer copper-lead alloy bearings after their overlay has worn out. Then, we studied the issues of lowered seizure resistance that results from the exposure of the nickel barrier, and of deficient corrosion resistance that results from the exposure of the bearing alloy. In order to improve upon these areas, we focused on diffusion phenomenon of overlay elements without the nickel barrier and also studied the feasibility of creating engine bearings whose alloy composition has been partially modified.

The diffusion phenomena of tin and indium which are contained in the lead-base overlay of 3-layer copper-lead alloy bearings were studied. Easier diffusion of tin compared with indium decreases the corrosion resistance of the overlay, and the tin reacts with the underlayer to form brittle Ni-Sn or Cu-Sn intermetallic compound, resulting in weak bonding strength. Addition of copper into Pb-In overlay markedly restrains the diffusion of indium and therefore stabilizes the characteristics of corrosion resistance, bonding strength and mechanical properties for a long period. Cavitation tests, seizure tests and bearing fatigue tests were conducted on Pb-In-Cu overlay to study the feasibility of its application to actual engine bearings.

In recent years, the removal of lead (Pb), which is an environmentally hazardous material often used in bearings for automotive engines, has been continuously promoted. Bismuth (Bi) is attracting attention as a substitute for lead, and it is currently being used mainly for passenger cars and trucks as a lead replacement. However, lead has not been replaced for motorcycles where the bearings are exposed to high temperatures at high rotation speeds, and trucks and generators where high loading capacity, long lifetime and good corrosion resistance are required. It has been difficult to achieve both high load and corrosion resistant for a bearing overlay material. The purpose of this development is to improve the corrosion resistance and fatigue resistance of bismuth overlay by developing a bismuth- antimony alloy overlay in which antimony (Sb) is added to the bismuth matrix.

Bismuth has been applied successfully as sliding bearing overlay material in internal combustion engines, where a good combination of sliding properties, mechanical strength and corrosion resistance can be attained. However, environmental pressures driving towards lower emission and higher fuel efficiency are set to raise firing loads above the capability of many state-of-the-art bismuth materials in the market. At the same time, in order to meet increasingly stringent environmental regulations modern engines are adapting to more efficient and economic designs which put bearing materials under ever growing pressure to provide enhanced oxidation resistance and robustness to cope with elevated engine operating temperature and tighter oil clearance.