Search Results

Introduction of an array of new electrical and electronic features into future vehicles is generating vehicle electrical power requirements that exceed the capabilities of today's 14 volt electrical systems. In the near term (5 to 10 years), the existing 14V system will be marginally capable of supporting the expected additional loads with escalating costs for the associated charging system. However, significant increases in vehicle functional content are expected as future requirements to meet longer-term (beyond 10 years) needs in the areas of emission control, fuel economy, safety, and passenger comfort. A higher voltage electrical system will be required to meet these future requirements. This paper explores the functional needs that will mandate a higher voltage system and the benefits derivable from its implementation.

This paper presents an approach to the design of automotive applications based on the client/server architecture, which has been well established in office automation. The basic client/server model is first discussed in the context of automotive requirements. This new function oriented approach is then compared to the previous, device oriented approach. After the introduction of basic components the communication mechanism is discussed with regard to the fundamental procedures, data representation and protocol implementation. Its usage is then explained by an example. Finally, after presenting the results of this study, there is an outlook to future work as well as to possible collaboration with others partners in order to achieve further standardization.

The design of automotive electronics is a highly cooperative, distributed process between car manufactures and suppliers. Due to significant increase of quality, cost, and time to market demands, several initiatives have been founded over the last years to address the increasing demand for standardization both for automotive electronics and vehicle based software. The German MSR consortium has concentrated on design tools and information exchange between manufacturers and suppliers, whereas the OSEK/VDX consortium has concentrated on the establishment of basic software components for open system architectures. To address future demands, these activities have to be consolidated and complemented by initiatives addressing the systematic improvement of the concurrent design processes as well as the appropriate qualification of engineering personnel.

The ability to make accurate decisions concerning early body-in-white architectures is critical to an automaker since these decisions often have long term cost and weight impacts. We address this need with a methodology which can be used to assist in body architecture decisions using process-based technical cost modeling (TCM) as a filter to evaluate alternate designs. Despite the data limitations of early design concepts, TCM can be used to identify key trends for cost-effectiveness between design variants. A compact body-in-white architecture will be used as a case study to illustrate this technique. The baseline steel structure will be compared to several alternate aluminum intensive structures in the context of production volume.

By-wire systems have been established for several years in the area of aircraft constructions. There is the visible trend to realize by-wire applications without mechanical or hydraulic backup systems in vehicles. The required electronic systems must evidently be available and safe. This paper addresses a new automotive architecture approach using the time-triggered fault-tolerant TTP protocol that has been designed for class C safety related control applications, like brake-by-wire or steer-by-wire, due to the SAE classification [1]. As an example we present this approach within a brake-by-wire research car (case study) without mechanical backup. The intention of this architecture is to tolerate one arbitrary fault - excepting faults of actuators - without any effects of the brake performance. For this purpose we use redundancy in communication (TTP) and electric components like sensors, actuators and power supply.

Two critical milestones that must be achieved during concept design are 1) definition of a product architecture that meets performance, producibility, and strategic objectives, and 2) estimation of the integration risk in each candidate concept. This paper addresses these issues by describing the role played by the producibility members of an Integrated Product Team (IPT) during concept design. Our focus is on the execution of the what we call the “chain method”, which illustrates the structure of function delivery in a concept in a simple pictorial way and helps the IPT to understand the advantages or disadvantages of using a modular or an integral product architecture. The producibility members play a central role in capturing and evaluating the chains for different candidate concepts and decompositions.

A few years ago, the automobile industry agreed to adopt standards for a new voltage for the production and use of electrical power. The perception was near universal that 14 Volts was at the limits of its capability, and that 42 Volts would be adopted in a rush. The universal perception was wrong. Since then, much of the auto industry has encountered hard financial times. In a totally separate development, parts suppliers introduced innovations at 14 Volts, some of which a few years ago were thought to require 42 Volts. Today, there are 42-Volt cars and trucks for sale, but only at numbers far lower than necessary to begin to achieve economies of scale. But the factor which caused the industry to develop the 42 Volt standard, the growth of electricity use on motor vehicles, continues with no sign of letup. Further, the true technical obstacles to adoption of 42 Volts have been discovered and at least provisionally solved.

This paper introduces a new design for alternator systems that provides dramatic increases in peak and average power output from a conventional Lundell alternator, along with substantial improvements in efficiency. Experimental results demonstrate these capability improvements. Additional performance and functionality improvements of particular value for high-voltage (e.g., 42 V) alternators are also demonstrated. Tight load-dump transient suppression can be achieved using this new design and the alternator system can be used to implement jump charging (the charging of the high-voltage system battery from a low-voltage source). Dual-output extensions of the technique (e.g., 42/14 V) are also introduced. The new technology preserves the simplicity and low cost of conventional alternator designs, and can be implemented within the existing manufacturing infrastructure.

With the recent advancement in sensing and controller technologies architecture design of an autonomous driving system becomes an important issue. Researchers have been developing different sensors and data processing technologies to solve the issues associated with fast processing, diverse weather, reliability, long distance recognition performance, etc. Necessary considerations of diverse traffic situations and safety factors of autonomous driving have also increased the complexity of embedded software as well as architecture of autonomous driving. In these circumstances, there are almost countless numbers of possible architecture designs. However, these design considerations have significant impacts on cost, controllability, and system reliability. Thus, it is crucial for the designers to make a challenging and critical design decision under several uncertainties during the conceptual design phase.