Refine Your Search

Topic

Search Results

Viewing 1 to 11 of 11
Technical Paper

Thermal Spray Preforms: An Economical Route to SRIM Composites

1994-03-01
940172
An innovative and economical new method has been developed to fabricate glass fiber preforms in the Structural Reaction Injection Molding (SRIM) process to produce structural composite components. The method involves blowing a resin powder through a ring of flame in a commercial thermal spray gun to achieve a melt, and directing the melt onto a fiber reinforcement where the polymer solidifies on contact and binds the fibers together. The fibers are fed through a chopper gun and cocurrently deposited with the binder onto a screen in the shape of the part. A vacuum is applied to the back of the screen by a blower to hold the fibers in place. The thermal spray process has significant economical advantages over the use of mat to fabricate preforms due to lower raw material costs and waste. It also has many advantages over traditional directed fiber processes, including capital and energy savings from the elimination of the preform drying operation.
Technical Paper

Processing Improvements in Low Density RIM Composites

1997-02-24
970146
The advantage of internal mold release in the production of automotive parts such as exterior fascia and body panels is well known. Recently a new type of internal mold release technology has emerged in the area of low density RIM for interior door panels. Products have been developed for both low density reinforced RIM and structural RIM applications without sacrificing physical properties. This latest technology has the potential for producing hundreds of parts after a single application of external mold release. The exact number of parts that can be obtained will vary depending on several factors including the initial condition and design of the mold. Although able to release from aluminum or steel, adhesion to vinyl cover stock is not greatly affected. Therefore, these products can be used for both pour behind vinyl and substrate only applications.
Technical Paper

Cockpit Module Approach to Instrument Panels - A System Evolution

1997-02-24
970441
The functional performance of the instrument panel has been changing dramatically since the late 80s, with FMVSS 208 legislation and its related impact on the addition of air bags and knee bolsters. In addition to addressing occupant safety legislation through more safety components, as well as navigation, security, comfort, informational and other systems are being added to the instrument panel as the consumers' desire for enhanced features continues. At the same time, consumers still want a product that is uncomplicated, affordable, aesthetically pleasing and - at the same time - doesn't limit valuable interior compartment space. The early efficient integration of these components (electrical, architecture, HVAC, steering) in the design, engineering and assembly process will be the areas of requirement that will have a primary effect on IP system cost in the future.
Technical Paper

Structural Composites from RIM Mat Molding

1987-02-01
870528
The commercial success of reaction injection molding (RIM) has led to concepts using RIM machinery to mold high modulus glass reinforced composites. This paper describes the static and dynamic mechanical properties of three different resin systems based on polyisocyanurate and polycarbamate chemistries with the use of a continuous glass mat.
Technical Paper

PVC Covered Low Density RRIM Interior Automotive Trim Components and Their Recyclability

1993-03-01
930631
Lightweight reinforced RIM polyurethane substrates are increasingly being specified for fully covered automotive applications such as interior door panels, instrument panels, and package shelves. In addition to offering a 30-40 % weight reduction over conventionally used substrate materials, consolidation in manufacturing steps are achieved by molding direct to polyvinylchloride (PVC), polyurethane (PU) and/or textile coverings. Weight reduction and consolidation of manufacturing steps lead to considerable part cost savings. Styling trends toward complex, deep drawn door panels, integrated with instrument panel modules, are easily fulfilled with low pressure RIM. Existing RIM capital used to produce RRIM fascia, cladding, and body panels is suitable to manufacture low density RRIM substrates (LD-RRIM).
Technical Paper

Polymeric Reflective Materials: The Future of Body Ornamentation and Lighting

1993-03-01
930467
Polymeric Reflective Materials (PRM) offer the automotive designer a unique new material and processing technology for vehicle ornamentation and lighting. PRM is a highly reflective multi-layer thermoplastic extruded sheet containing no metallization or surface coatings to create it's reflective appearance. PRM's ability to “transflect” light is a very unique characteristic. Transflection is the ability to simultaneously transmit and reflect light. PRM enables the integration of lighting components and exterior ornamentation to create uninterrupted exterior styling lines. PRM allows lighting components to disappear. Targeted applications include rear lighting lenses, illuminated body trim, emblems, door edge guards, safety lights, etc. Additionally, unique visual effects are created by front and second surface decorating. PRM also offers many interior styling options.
Technical Paper

Nonlinearities and the Finite Element Analysis of Plastic Materials

1988-02-01
880030
The manufacture of plastic components typically involves large deformations of the material, interaction with rigid boundaries, and a material constitutive response which depends strongly on temperature and the rate of straining. In service, material response may change with time, and a component may undergo large deformations under load. Numerical analysis of manufacturing processes and of plastic components under load must account for these nonlinear effects. The paper discusses nonlinear finite element analysis in the context of plastics manufacturing and in-service loading of plastic components. Some currently available techniques are illustrated with an example of creep induced buckling, an example of warping due to post-forming cooling, and a case involving blow molding.
Technical Paper

Gasoline Barrier Properties of Surface Treated Polyolefins

1968-02-01
680474
The Dow system for obtaining a gasoline barrier in high density polyethylene fuel tanks reduces permeation by roughly 95%, is permanently adhered to the surface, does not affect the physical properties of the high density polyethylene, survives normal flexure intact, and can be applied to the tank during its fabrication at a relatively low cost.
Technical Paper

Weld Repair of Aircraft Quality Magnesium Castings

1957-01-01
570009
GENERAL techniques used in the weld repair of magnesium aircraft castings by both gas and arc welding methods are described here. Coverage is given to equipment, methods of surface preparation, preheating, welding procedure, post-heat-treatment. Some typical arc weld repair jobs are described and illustrated. Included also are descriptions of weld defects encountered because of poor welding technique. Typical mechanical property data are shown.
Technical Paper

Evaluation of Liquid Applied Dampers: Impact of Polymer-Inorganic Interface on Performance

2017-06-05
2017-01-1877
Damping materials are applied to the vehicle body during production to provide passenger comfort by reducing noise and structural vibration through energy dissipation. Noise, Vibration, and Harshness (NVH) Engineers identify critical areas of the vehicle body for material placement. Damping materials, which include liquid applied dampers, are typically applied directly on the structure, covering large areas. These film forming materials can be spray applied using automation and, after baking, result in a cured viscoelastic damping layer on the target substrate. Typical liquid applied dampers contain an aqueous dispersion of film forming polymer which functions to bind inorganic materials together in the coating and provide a composite structure that dissipates energy. Representative damping coatings were prepared from dispersions of polymers with varying viscoelastic properties and chemical compositions.
Technical Paper

Instant Set Polymer-A New Dimension in Plastics

1976-02-01
760331
A new plastic and processing technology known as ISP (Instant Set Polymer) has been developed that allows production of essentially any size part via liquid injection molding. Mold cycle (60 sec) is independent of part area or thickness (1/4″ to 6″). Items 12 inches thick and weighing 200 lbs have been successfully produced.
X