Search Results

This study investigates the effect of Teflon and adhesive coatings on the torque-tension relationship and the self-loosening performance of threaded fasteners. Two Teflon insulation coatings and one locking adhesive are considered. The torque-tension relationship is established for coated and uncoated fasteners for both tightening and loosening. Finally, the fasteners are tested to determine their self-loosening performance under cyclic transverse loads. A computer controlled fastener tightening system is used to establish the torque-tension relationship during tightening. The coefficients of thread and bearing friction, and the overall nut factor are measured. The breakaway loosening torque of tightened bolts, along with the coefficients of thread and underhead friction and nut factor are investigated. A modified Junker machine is used to evaluate the self-loosening performance of fasteners with various coatings.

This paper investigates the reliability of tightening automotive weld studs, using experimental techniques. During the nut installation on weld studs, only a small amount of the applied torque is used to produce the required clamp load in the joint. While a large amount of the input torque is lost in overcoming friction between the sliding surfaces. Large scatter in the stud tension often results from the normal friction variations. As a result, the weld stud becomes more susceptible to a pull-through failure mode especially in thin sheet metal applications. The torque-angle signature during stud tightening is analyzed to assess the strength and quality of the weld stud joint. The effect of the weld stud thread type, stud coating, sheet metal thickness and stud material on the torque-tension relationship of weld studs is investigated. An experimental procedure and test set up are proposed to test weld studs.