Search Results

The high costs of prototyping, revisions, and production tooling, with a higher emphasis on quality, concurrent with demands for miniaturization, higher-density packaging, stricter performance, and a shortened product development cycle, have led to the development of advanced analysis techniques that address the performance issues associated with failure prevention in automotive connectors. Because of the complex material and geometric nonlinearity demands in performance, traditional calculations are inadequate, and new methods, utilizing finite element analysis techniques were developed. These highly specialized analysis techniques will enable the designer and engineer to predict connector performance with a high degree of confidence. Concurrent with concept designs, structural analyses (in the areas of assembly, disassembly, and terminal retention) must be done prior to design release.

The purpose of this paper is to discuss design methodology, manufacturing considerations, and testing proveout for a prototype gas-assist-molded, energy-absorbing, glovebox door program. The design used a single gas pin mounted in a multiple-gas-channel component and an internal gas manifold to form an efficient energy absorbing system. The end goal for the development program was to manufacture a glovebox door in a system that could meet the customer's targets for cost, surface appearance, and safety considerations without degrading function and fit. This paper will discuss the ability of a design methodology to predict actual component performance using engineering calculations, analytical tools, and prototype testing/molding during the development.

The formulation of injection moldable thermoplastics with small loadings of graphite nanotubes provides sufficient conductivity in molded parts to allow for use in electrostatic painting applications. Normally, plastic parts need to be painted with a conductive primer prior to the electrostatic painting of base and clear coats. The use of conductive plastics eliminates the need for the priming step, and improves paint transfer efficiency and first pass yield. These elements provide obvious savings in materials and labor. What is less obvious, however, is the dramatic positive environmental impact that can occur through the reduction in emissions of volatile organic compounds (VOCs). Graphite nanotube technology provides advantages over other technologies such as conductive carbon black. In order to reach the percolation threshold for conductivity in carbon-black-containing resins, the loading of carbon black required tends to embrittle the polymer.

Basic automotive steering wheel armature design has been largely unchanged for years. A cast aluminum or magnesium armature is typically used to provide stiffness and strength with an overmolded polyurethane giving shape and occupant protection. A prototype steering wheel armature made from a unique recyclable thermoplastic eliminates the casting while meeting the same stiffness, impact, and performance criteria needed for the automotive market. It also opens new avenues for styling differentiation and flexibility. Prototype parts, manufacturing, and testing results will be covered.

The evolution toward the use of electrostatic painting processes has been driven primarily by environmental legislation and efforts to improve efficiencies in the painting process. The development of conductive substrate material compliments the industry trend toward a green environment through further reductions in emissions of volatile organic compounds during the painting process. Traditionally, electrostatic painting of thermoplastics requires that a conductive primer be applied to the substrate prior to topcoat application. The conductive polymer blend of polyphenylene ether and polyamide provides sufficient conductivity to eliminate usage of conductive primers. Additional benefits include improved transfer efficiencies of the primer and top coat systems, uniform film builds across the part, and improved painting of complex geometries.

Automotive exterior paint systems can significantly affect the impact performance of thermoplastic body panels. To utilize the benefits of predictive engineering as a tool to assist in the design and development of thermoplastic body panels, thermoplastic body panel materials have been characterized with typical automotive paint systems for use for finite element modeling and analysis. Paint systems used for exterior body panels can vary from rigid to more flexible, depending on the vehicle manufacturer's specifications. Likewise, thermoplastics for body panels vary in mechanical properties, primarily depending on the heat performance requirements of the application. To understand the effects of paint systems on impact performance of thermoplastic body panels, two different paint systems, representing “rigid” and “more flexible,” were evaluated on two body panel grades of thermoplastics with different mechanical properties.

This paper examines a variety of thermocouple and infrared measurement techniques as means of obtaining accurate and consistent temperature measurements within a headlamp system. While measuring temperature is straightforward in principle, in practice, these measurements are fraught with potential error. The paper summarizes a succession of experiments conducted at our Parts Design Center (formerly the Application Development Resource Center) in Pittsfield, MA. These experiments lead to the ability to accurately measure temperature at a given location within a lamp assembly. Using these studies and the resulting transfer functions as a foundation, a Design of Experiment (D.O.E.) is presented which explores the effect of a variety of headlamp design factors on the surface temperature of a headlamp reflector at a given location.

As the global auto industry wrote the final chapter on its first century, we saw the average thickness of an automotive instrument panel drop from 3.0 mm-3.5 mm to 2.0 mm-2.3 mm, as found in the 1999 Volkswagen Jetta and Golf. By reducing the wall thickness of the instrument panel, Volkswagen started an industry trend: both OEMs and tiers are investigating technologies to produce parts that combine a lower cost-per-part via material optimization and cycle-time reduction with the superior performance of engineering thermoplastics. The goal is to produce parts that are positioned more competitively at every stage of the development cycle - from design, to manufacturing, to assembly, to “curb appeal” on the showroom floor. The key to this manufacturing and design “sweet spot” is a technology called thinwall - the molding of plastic parts from engineering thermoplastics with wall thicknesses thinner than conventional parts of similar geometry.

As the need for plastic components with high-performance and low systems cost continues to escalate, the issues associated with bringing applications to automotive market have become more complex. Automotive applications such as seamless integral Passive Supplemental Inflatable Restraint (PSIR) systems can have tearseams that are either molded-in or laser scored. Molded-in tearseams in seamless Instrument Panels (IP) eliminate the secondary operation of laser scoring, but they warrant thin wall molding conditions. This paper describes material characterization under thinwall molding conditions wherein the effects of processing on mechanical properties are explored. This paper also discusses results from a proprietary finite element code developed at GE to predict the processing parameters, which affect the mechanical properties of the material at the tearseam in a seamless IP system.

This paper discusses a Design for Six Sigma (DFSS) based methodology for designing an injection molded bumper energy absorber to help meet vehicle pedestrian protection requirements. The development process is described, and an example is presented of its use in designing an injection molded energy absorber for a range of various vehicle styling parameters. First, an idealized set-up incorporating the car styling parameters critical for pedestrian protection requirements was developed. Then, the vehicle and Energy Absorber (EA) geometries were parameterized and a DFSS process was employed to investigate the design space using Finite Element Impact Analysis with a commercially available Lower Leg Form Impactor.

There are a multitude of opportunities to utilize two-shot or overmolding technology in the automotive industry. Two-shot or overmolding a thermoplastic elastomer onto a rigid substrate can produce visually appealing, high quality parts. In addition, use of this technology can offer the molder significant reductions in labor and floor space consumption as well as a reduction in system cost. Traditionally, two-shot applications were limited to olefinbased TPE's and substrates, which often restricted rigidity, structure and gloss levels. With the development of thermoplastic elastomers that bond to engineering thermoplastics, two-shot molding can now produce parts that require higher heat, higher gloss and greater structural rigidity. This paper will outline engineering thermoplastics that bond with these new elastomers, discuss potential applications, and review circumstances that offer the best opportunity to call upon the advantages of two-shot and overmolding technology.

An Instrument Panel (IP) cockpit is one of the most complex vehicle systems, not only because of the large number of components, but also because of the numerous design variations available. The OEM can realize maximum benefit when the IP cockpit is assembled as a module. This requires increased performance attributes including safety, durability, and thermal performance, while meeting styling and packaging constraints, and optimizing the program imperatives of mass and cost. The design concept discussed in this paper consists of two main injection molded parts that are vibration welded to form a stiff structure. The steering column is attached to the cowl and plastic structure by a separate steel column support. The plastic IP structure with integrated ducts is designed and developed to enable the IP cockpit to be a modular system while realizing the benefits of mass and cost reduction.

This paper documents the design methodology, part performance, and economic considerations for a generic hardware module applied to a front passenger-car door. Engineering thermoplastics (ETPs), widely used in automotive applications for their excellent mechanical performance, design flexibility, and parts integration, can also help advance the development of modular door-hardware systems. Implementation of these hardware carriers is being driven by pressures to increase manufacturing efficiencies, reduce mass, lower part-count numbers, decrease warranty issues, and cut overall systems costs. In this case, a joint team from GE Plastics, Magna-Atoma International/Dortec, and Excel Automotive Systems assessed the opportunity for using a thermoplastic door hardware module in a current mid-size production vehicle. Finite-element analysis showed that the thermoplastic module under study withstood the inertial load of the door being slammed shut at low, room, and elevated temperatures.

A technique for estimating the lateral loads exerted on the vehicle frame during centerline pendulum impacts has been developed. These loads can either be determined by sophisticated hand calculations or by using beam finite-element analysis. The loads can either be determined as a fraction of the peak impact load, or as an absolute number. The dependence of the lateral load on frame stiffness, bumper cross-section, and bumper sweep will be shown to be quite dramatic.

Engineering thermoplastics are being used increasingly in automotive exterior body applications; most of these applications require that the panels be painted “on line” with the rest of the car body at relatively high temperatures. The high temperatures associated with the painting/conditioning of the car have been shown to cause dimensional stability problems on automotive fenders molded from NORYL GTX®. This paper contains the results of an extensive FEA investigation targeted at determining what factors cause dimensional problems in fenders exposed to high heat. The ABAQUS FEA software was used to perform computer simulations of the process and the C-PACK/W software was used to determine molded in stress values.

The gas injection molding process created a great deal of interest when it was first introduced, especially on the part of the automotive plastics industry. The process allows injection molders to make larger parts with increased rigidity at lower clamping pressures. This, in turn, allows parts to be molded that have not previously been able to be created. However, the process has been hampered by problems. First and foremost have been the numerous patent infringement suits and licensing difficulties that have retarded the spread of the technology in the United States. Second, technological problems - such as controlling the seemingly erratic nature of the gas - have also been an issue. As with any new molding technology, the plastics industry is still attempting to establish logical techniques to set up and rationalize processing conditions for the method.

Gas-assist injection molding is a relatively new process. It is an extension of conventional injection molding and allows molders to make larger parts having projected areas or cross sectional geometries not previously possible using existing equipment. However, controlling the injection of the gas has been a concern. The plastics industry is attempting to establish logical techniques to set up and rationalize processing conditions for the method. Although gas injection equipment permits a number of adjustments, an optimum processing window must be established to provide control and repeatability of the process to mold consistent, acceptable parts. This paper describes a strategy and equipment for rationalizing and accurately controlling gas injection processing conditions that are applicable regardless of the type of molding machine or processing license a molder is using.

Because it is common to attach plastic parts to other plastic, metal, or ceramic assemblies with mechanical fasteners that are often stronger and stiffer than the plastic with which they are mated, it is important to be able to predict the retention of the fastener in the polymeric component. The ability to predict this information allows engineers to more accurately estimate length of part service life. A study was initiated to understand the behavior of threaded fasteners in bosses molded from engineering thermoplastic resins. The study examined fastening dynamics during and after insertion of the fastener and the effects of friction on the subsequent performance of the resin. Tests were conducted at ambient temperatures over a range of torques and loads using several fixtures that were specially designed for the study. Materials evaluated include modified-polyphenylene ether (M-PPE), polyetherimide (PEI), polybutylene terephthalate (PBT), and polycarbonate (PC).

A conceptual step-pad bumper system has been designed for a sport utility vehicle. This bumper incorporates an all-thermoplastic solitary beam/fascia with a Class A finish and a replaceable, grained thermoplastic olefin (TPO) or urethane step pad. The rear beam is injection molded and the cover plate features integrated through-towing capabilities and electrical connections. The bumper is designed to pass FMVSS Part 581, 8 km/h impacts. The system can potentially offer a 5.0-13.6 kg weight savings at comparable costs to conventional step-pad bumper systems. This paper will detail the design and development of the concept and finite-element analysis (FEA) validation.

Designers and engineers encounter many challenges in developing vehicles for the small-car market. They face constant pressure to reduce both mass and cost while still producing vehicles that meet environmental and safety requirements. At the same time, today's discriminating consumers demand the highest quality in their vehicles. To accommodate these challenges, OEMs and suppliers are working together to improve all components and systems for the high-volume small-car market. An example of this cooperative effort is a project involving an integrated structural instrument panel (IP) designed to meet the specific needs of the small-car platform. Preliminary validation of the IP project, which uses a compression-molded, glass-mat-thermoplastic (GMT) composite and incorporates steel and magnesium, indicates it will significantly reduce part count, mass, assembly time, and overall cost.