Search Results

With airlines increasingly directing their attention to operating costs and environmental initiatives, the More Electric Architecture for Aircraft and Propulsion (MEAAP) is emerging as a viable solution for improved performance and eco-friendly aircraft operations. This paper focuses on electric taxiing that does not require the use of jet engines or the auxiliary power unit (APU) during taxiing, either from the departure gate to take-off or from landing to the arrival gate. Many researchers and engineers are considering introducing electric taxiing systems as part of efforts to improve airport conditions. To help cut aircraft emissions at airports, MEAAP seeks to introduce an electric taxiing system that would reduce the duration for which engines and APUs operate while on the ground. Given this goal, the aircraft electrical system deployed for use at airports must rely on a power source other than the jet engines or APU.

The authors are currently developing the MEE (More Electric Engine) electric motor-driven fuel pump system for aircraft engines. The electric fuel system will contribute to the reduction of engine power extraction to drive the fuel pump; thus, an improvement in engine efficiency will be expected. In addition, the engine system reliability will be improved by introducing advanced electric architecture, and the reduction of hydraulic components, fuel tubes and fittings is effective to enhance the maintainability of the engine. Although it is considered that the MEE electric fuel system will realize several benefits, there are technical challenges to introduce such new electric system into aircraft. One of the key technical challenges is to construct a redundant and simplified electric fuel system, because continuous operation of the fuel pump system is crucial for aircraft safety.

This paper describes how the MEE (More Electric Engine) system contributes toward an integrated propulsion control system, with a particular focus on commercial aircraft. Current aircraft systems control the engine rotational speed or pressure ratio to control propulsion, but in future aircraft systems, control of the engine thrust itself will be required. Because controlling engine thrust can be used as an effective method of changing the aircraft speed and/or attitude, various approaches to engine thrust control have been investigated and developed. In this investigation, key technical issues have emerged; one is which is the need for an enhanced engine thrust response for stable control of the aircraft. The other is accurate estimation of engine thrust in flight. Incremental data processing capability is also required due to the need for additional monitoring, evaluation and calculation of engine parameters to ensure safe engine operation.

A new electric air-cycle system of aircrafts is investigated focusing on energy recovery from the exhaust air. The working fluid of air has the higher energy level in the cabin than in the outside during the cruise because the outside air is at low pressure and low temperature. In the system, by setting a recovery turbine behind the cabin, the discharged energy can be collected, although the working fluid through the system has been only discharged from the cabin into the outside. We perform a thermodynamic cycle-analysis, where the temperature, pressure, entropy, etc. are calculated at each position of the cycle by considering the two pressure ratios of the compressors as variable parameters to show T-s diagram. In addition, we obtain an energy recovery rate of the recovery energy to the necessary power for the electric compressor. The energy recovery rate is roughly estimated 40-80% under the reasonable practical operating conditions.

Current More Electric Aircraft (MEA) utilize Liquid Cooling Systems (LCS) for cooling on-board power electronics. In such LCS, coolant pipes around the structure of the aircraft are used to supply water glycol based coolant to sink heat from power electronics and other heat loads in the electronic bay. The extracted heat is then transferred to ram air through downstream heat exchangers. This paper presents a reliability examination of a proposed alternative Autonomous Air Cooling System (AACS) for a twin engine civil MEA case study. The proposed AACS utilizes cabin air as the coolant which is in turn supplied using the electric Environmental Control System (ECS) within the MEA. The AACS consists of electrical blowers allocated to each heat load which subsequently drive the outflow cabin air through the heat sinks of the power electronics for heat extraction. No additional heat exchanger is required after this stage in which the heated air is directly expelled overboard.

Electrical power management is a key technology in the AEA (All-Electric Aircraft) system, which manages the supply and demand of the electrical power in the entire aircraft system. However, the AEA system requires more than electrical power management alone. Adequate thermal management is also required, because the heat generated by aircraft systems and components increases with progressive system electrification, despite limited heat-sink capability in the aircraft. Since heat dissipation from power electronics such as electric motors, motor controllers and rectifiers, which are widely introduced into the AEA, becomes a key issue, an efficient cooling system architecture should be considered along with the AEA system concept. The more-electric architecture for the aircraft has been developed; mainly targeting reduced fuel burn and CO2 emissions from the aircraft, as well as leveraging ease of maintenance with electric/electronic components.

Aircraft designers determine the optimum aircraft configuration to meet performance requirements. Aircraft secondary power systems are very important for aircraft operation, however, traditionally these systems have not been considered in detail while the aircraft configuration and specifications are preliminary studied. Therefore, we constructed an aircraft conceptual design tool considering the many aircraft systems. Furthermore, we applied this design tool to a simple design problem taking into account two different kinds of secondary power system architectures (i.e. the conventional bleed air system and the more electric system), and discussed how the introduction of new aircraft systems affects results. Although the present method is theoretical and conceptual with limited applicability, the effect of the aircraft's secondary power system upon the concerning aircraft specifications was made clear both for the bleed air system and the more electric system.

With the growth in onboard electrification referred to the movement of the More Electric Aircraft, or MEA, and constant improvement in ECO standards, aircraft electricity load has continued to soar. The airline and authors have discussed the nature of future aircraft systems in the next two decades, which envisages the further More Electric Aircraft or the All-Electric Aircraft, or AEA, concept helping provide some effective aviation improvements. The operators, pilots and maintenance crews anticipate improved operability, ease of maintenance and fuel saving, while meetings depends for high reliability and safety by electrification. As part of initial progress, the authors approach the methodology of energy management for aircraft systems.

To improve an energy optimization issue of ECS for MEA, we propose our concept in which ACS is replaced with VCS. A VCS is generally evaluated as auxiliary or limited cooling system of an aircraft. Cooling demand of commercial aircraft usually becomes large due to ventilation air at hot day conditions. In case of using conventional VCS for whole cooling demand, the ECS becomes too heavy as aircraft equipment. Though ACS's light weight is advantageous, the issue that VCS will be available for aircraft ECS is important for saving energy. ECS of commercial aircraft should work for three basic functions, i.e. pressurization, ventilation, and temperature control. The three functions of the ECS for bleed-less type of MEA can be distributed among equipment of the ECS. MDFAC works for pressurization and ventilation. Therefore, we should select appropriate system for only temperature control.

This paper will propose a novel power generating system concept including an auxiliary, backup and emergency power source. Existing aircraft employ an auxiliary power unit (APU) and a ram air turbine (RAT) for power generation besides aero-engine generators. An APU works prior to starting propulsion on the ground and as a backup power plant during flight. The RAT is activated due to the need to maintain the essential systems in the case of an emergency situation. Both systems are optimized on conventional aircraft in which hydraulic, pneumatic and electric systems are supplied for control and equipment. Although a conventional aircraft needs hydro pumps and air compressors, the coming of a new era of more-electric architecture for aircraft and propulsion will be the stimulus to improve aircraft systems [1]. In more-electric aircraft, the authors focus on the low-pressure spool generation system of aero-engines.

This paper describes the concept of an air/fuel integrated thermal management system, which employs the VCS (Vapor Cycle System) for the refrigeration unit of the ECS (Environment Control System), while exchanging the heat between the VCS refrigerant and the fuel into the engine, and presents a feasibility study to apply the concept to the future all electric aircraft systems. The heat generated in an aircraft is transferred to the ECS heat exchanger by the recirculation of air and exhausted into the ram air. While some aircraft employ the fluid heat transfer loop, the transferred heat is exhausted into the ram air. The usage of ram air for the cooling will increase the ram drag and the fuel consumption, thus, less usage of ram air is preferable. Another source for heat rejection is the fuel. The heat exchange with the fuel does not worsen the fuel consumption, thus, the fuel is a preferable source.

The more electric aircraft (MEA) concept has been attracting attention over recent decades to reduce emissions and fuel consumption. In MEAs, many subsystems that previously used hydraulic or pneumatic power have been replaced by electrical systems, and hence the weight of inverters has significant importance. The weight of inverters is largely attributed to passive filters that reduce the derivative of output voltages dv/dt and electromagnetic interference noises caused by common-mode voltages. To reduce the size of passive filters, multilevel inverters with 5 or more voltage steps are preferred. However, classic multilevel inverters have some challenges to achieve these step numbers without using plural dc power supplies that require massive transformers. In this work, a gradationally controlled voltage (GCV) inverter is proposed for MEAs.

In development of more electric aircraft applications, it is important to discuss aircraft energy management on various level of aircraft operation. This paper presents a computationally efficient optimization model for evaluating flight efficiency on global and interval flight ranges. The model is described as an optimal control problem with an objective functional subjected to state condition and control input constraints along a flight path range. A flight model consists of aircraft point-mass equations of motion including engine and aerodynamic models. The engine model generates the engine thrust and fuel consumption rate for operation condition and the aerodynamic model generates the drag force and lift force of an aircraft for flight conditions. These models is identified by data taken from a published literature as an example. First, approximate optimization process is performed for climb, cruise, decent and approach as each interval range path.

This paper describes the comparison of electromagnetic characteristics of two different superconducting-motor structures for electrified aircraft propulsion systems. Future electrified aircraft demand higher output (over 16 kW/kg) and higher efficiency (> 98%) for their motors in comparison with current ones. To satisfy the demands, two kinds of superconducting motors are dealt in this study: one is partially superconducting motors (PSCMs), made of superconducting field coils and copper armature windings; the other is the fully superconducting motors (FSCMs) made of superconducting field/armature windings. They are cooled at 20 K with liquid hydrogen. We designed these two motors with finite element method to obtain the output density of 16-20 kW/kg for future electrified propulsion systems. We selected 3.0- and 5.0 MW superconducting motors, considering the application to aircraft for almost 180 passengers and 44 MW rated power for take-off.

Aircraft electrification is one of technological innovations to achieve the goal of CO2 emission reduction in civil aviation. In present research, we focus ourselves on an Electric Fuel Metering System (EFMS). Aircraft systems are commonly expected to make not only simplified configuration and improvement of controllability, but also safety and reliability. The electrification of fuel system also requires the similar approach. Therefore, a simple and reliable redundancy concept is a crucial challenge. In addition, stable and responsive controllability that does not affect engine operation is required, especially in fuel system, it is desired to achieve both accurate metering and short settling time without overshoot or undershoot. However, in such a system, the response is nonlinear due to the fuel flow circuit and the motor drive during current limiting.