Search Results

This paper reviews the physics-of-failure model for accelerated thermal cycle tests of solder joints associated with various electronics components, summarizes the parameters of the automotive environment, and discusses the methods for developing thermal cycle tests for reliability validation for automotive electronics. The paper proposes an approach to develop the requirements for validation tests based on the customer usage profiles and the desired product life goal. This requirement determines the nominal testing duration based on the equivalent damage generated from the worst-case field applications.

During the conceptual design stages of an instrument panel (IP) structure, various alternatives in architecture need to be evaluated. This entails being able to obtain a quick assessment of how the designs roughly compare in structural performance. The current climate of reduced cycle times dictates that quick and inexpensive CAE techniques be employed for this purpose. This paper describes the background of a design process in which Computer Aided Engineering (CAE) models, fully associative with the underlying 3D solid model, are rapidly generated for use in structural vibration, thermal and crash analysis.

A compact cassette and compact disc (CD) mechanism mounting bracket was developed for an automotive radio. The bracket, a single die cast magnesium component, offers a light weight, rigid platform for simultaneously attaching both mechanisms to create a simple modular subassembly.

The scratch resistance of automotive plastic coatings has been studied extensively over the past few years. Most testing methodology to correlate damage of the coating to field conditions has been in the form of small particulate wearing, e.g., alumina oxide abrasive, or indentation resistance of the coating to an external probe, e.g., a nanoindentation device. The subsequent damage imparted to the coating has generally been analyzed by the amount of coating mass lost in the wear event or through a ratio of optical reflectance of the damaged area to the undamaged surface. In this paper, we attempt to delineate surface damage resistance of several automotive clearcoats through an optical interferometry methodology developed to measure volume and depth of damage incurred with small particle alumina oxide erodents in a simulated wear environment.

As technology advances, it is possible to present the driver with more information and communication options than ever before. Intelligent transportation system products will make new and additional demands on the driver's attentional and cognitive abilities. Today, in-vehicle cellular phones and faxes are common, and soon wireless communication with the Internet and various other forms of specialized information will be available to drivers as well. The challenge is to develop a human-machine interface (HMI) that is beneficial yet simple and easy to use as more demands are made on the driver. This paper provides guidance in utilizing human factors properties to ensure simplicity and prioritization of tasks in HMI development

This paper highlights the application of design optimization in reducing product manufacturing cost without compromising product performance. By using a topology optimization method, the manufacturing cost of a clam shell has been reduced by approximately one-third, while maintaining the NVH performance of the steering column that is connected to the instrument panel (IP) through the clam shell. Two different optimization approaches and two different topological weld deployments are investigated. It is found that a fully-deployed seam weld approach with automatic optimization provides the best design results.

Back to the non Flex Fuel vehicles, the knock control system was designed and calibrated to absorb differences between engines (mainly compression ratio) and to protect the engine against knock damage (a correction up to 4 degrees BTDC was usually enough). But now, two new variables get in the scene: Flexible Fuel strategy, working from E22 to E100 (all blends in between) and small displacement (1.0 liter) high compression ratio engines. In this new scenario the system must be capable of correcting all spark advance differences, once knock control system acts as a safety feature, protecting the engine even if the fuel learning shows some deviation. In addition to that, we have the compression ratio variation between minimum and maximum limits. Since the engine is small (as well its combustion chamber), each tenth of a millimeter difference during manufacturing process, results in an important final compression ratio variation.

Since the appearance of the first flexible fuel vehicle back in 2003, many improvements have been done in order to deliver a more reliable and more efficient engine package. The increase in compression ratio is one of the mechanisms used in performance pursuit and to guarantee the engine durability meeting fuel economy requirements, running with fuels from regular E22 to E100 under high compression, many challenges were faced. The pre-ignition running at low engine speeds and mid to high loads had to be controlled, maintaining a reasonable driveability. Increasing the engine speed across its useful band, a special knock event could occur. It is special because results in peak pressures up to 15.000 kPa, named “single strong knock” and is present mainly at highest closed-loop load operation. In addition of that, design limitation was the cause for cylinder #04 low sensitivity. This characteristic narrowed the spark correction band resulting in destructive knock activity.

The penetration of rainwater through the heating ventilation and air conditioning system (HVAC) of a vehicle directly affects the provision of thermal comfort within the vehicle passenger compartment. Present vehicle designs restrict considerably the air-management processes due to reduced space and tighter packaging. The motivation for the study is to get an insight into factors affecting the water ingress phenomenon when a stationary vehicle is subjected to water loading such as heavy rain when parked or waiting in a traffic light or when in a car wash. The test programme made use of a compact closed circuit full-scale automotive climatic wind tunnel that is able to simulate wind, rain and road inclination. The tunnel was developed as part of the collaborative research between the Flow Diagnostics Laboratory (FDL) of the University of Nottingham and Visteon Climate Control Systems [1].

The analysis of airflow in an automotive HVAC cowl box is complicated by the cross sectional variations and abrupt changes in airflow direction. In this study, the complex three-dimensional turbulent flow found in a generic road vehicle cowl box is investigated experimentally and computationally. An optical anemometer is used to acquire the experimental data within a white metal sheet of a cowl box. The results are then used to validate and tune a Computational Fluid Dynamics (CFD) numerical cowl model.

Two combined four-bar mechanisms have two functions: lift and collapse. In the current design, high effort was found for the collapse function. Axiomatic Design was used to analyze and optimize the current design. The customer domain was mapped into the functional domain by specifying customer needs in terms of functional requirements (FRs) and constraints (Cs). Design parameters (DPs) were identified in the physical domain for each functional requirement. Design matrices were then defined to characterize the product design. The two combined four-bar mechanisms have two functional requirements at the highest level: lift and collapse. The corresponding DPs are: lift four-bar linkage and collapse four-bar linkage. Through zigzagging to decompose to the next level, the design was found to be coupled. At this level, a torsion spring was selected as the DP for minimizing the lift effort.

The drive to reduce weight, simplify assembly, and cut total system cost in today's vehicles is relentless. Replacing metal systems with thermoplastics has been of considerable interest in the engineering community. The current generations of engineering thermoplastic resins are enabling the use of plastic systems in demanding underhood applications. Technical data and discussion regarding the materials, design, molding, and assembly of lightweight composite throttle bodies will be presented in this paper. Comparisons with machined aluminum throttle housings are drawn to establish a baseline with the throttle body housing component that is most common in production today. Design flexibility and process simplification are some of the approaches highlighted. Much of the technical information provided in the paper applies to both cable driven mechanical throttle bodies as well as electronic throttle bodies under development.

Gear whine in 1st and 2nd gears in a new rear wheel drive automatic transmission was identified as a potential customer dis-satisfier. Improvements to the vehicle system were implemented, but did not sufficiently reduce the noise. CAE modeling and hardware testing were used for gear tooth optimization, transmission system, driveline, and vehicle system studies. The planetary gears were re-designed with increased contact ratio, and significant interior noise reduction was achieved; but some vehicles still had excessive noise due to gear parameter variability from multiple sources. Using a DOE and statistical studies, a set of gear parameter targets were identified within the tolerances of the design, which achieved the program objectives for noise.

The analysis of airflow in an automotive HVAC cowl box is complicated by the cross sectional variations and abrupt changes in airflow direction. In this study, the complex three-dimensional turbulent flow found in a generic road vehicle cowl box is investigated experimentally and computationally. An optical anemometer is used to acquire the experimental data within a white metal sheet of a cowl box. The results are then used to validate and tune a Computational Fluid Dynamics (CFD) numerical cowl model.

In the engine management systems field, there is lack of sensors locally built and available for sale in Brazil. Therefore, many auto parts companies have to import them affecting directly the final products costs (technology know-how/development costs, import taxes and other material handling/custom related costs). This paper was motivated to study an alternative for a simple, cheaper and locally made throttle position sensor. The choose of this part was because the fact that it is one of the most expensive in the throttle body bill of. For developing this new alternative, it was used a tool called value analysis and value engineering. The outcome of this study was a throttle position sensor function integrated to the throttle body manufacturing line with the advantages that 100% components can be locally purchased, improved robustness against humidity and component quantity reduction by 40%. Therefore achieving more value added.

It is the overall objective in the development of automotive climate control systems to guarantee a subjective feeling of thermal comfort for each passenger. The fulfillment of all physical specification parameters of a HVAC unit, such as airflow, temperature, etc., does not automatically achieve this goal. Engineers need to ensure that the consequences of the HVAC design lead to the desired demands inside the passenger compartment. In this paper a method will be presented that enables a time dependent detailed prediction of personal thermal comfort for each passenger in standard cooldown or warm-up tests. In addition to calculating overall comfort ratings for each passenger, transient local body segment comfort ratings can be calculated to determine local variations in comfort. It is therefore possible to discover reasons for potential discomfort in a much more detailed way. To accomplish this, mannequins are added to the CFD model of the cabin.

Semi-solid metal (SSM) casting has long been identified as a high-volume process for producing safety-critical and structural automotive castings, but cost and complexity issues have limited its widespread commercial acceptance. Rheocasting, an SSM process that creates semi-solid slurry directly from liquid metal, eliminates the cost disadvantages of the process. However, the majority of rheocasting processes are complex and difficult to operate in the foundry environment. Recent work at MIT has led to the fundamental discovery that application of heat removal and convection as a molten alloy cools through the liquidus creates a non-dendritic, semi-solid slurry. A new process based on this understanding, S.S.R.™ (Semi-Solid Rheocasting), simplifies the rheocasting process by controlling heat removal and convection of an alloy during cooling using an external device. Solution heat treatable castings have been produced in a horizontal die casting machine with the S.S.R.™ process.

This paper describes a method for calculating the temperature of a semi-infinite heat sink plate of a given thickness, subjected to transient heating by a D2Pak power IC. Accurate prediction of the heat sink temperature over time then allows for more accurate calculation of the IC junction temperature. A set of curves have been developed for the time variation of heat sink plate temperature. This has been achieved by the use of finite element methods, and modeling a large range of configurations. The system variables were put into dimensionless form, and the model results plotted. The resulting plot indicates an effective thermal resistance of a given heat sink plate at a given point in time. A curve fit has also performed on the results. The results of the finite element model have been compared with laboratory data.

Six Sigma methodologies in combination with Lean thinking have made considerable inroads as continuous improvement tools initially in manufacturing and more recently for service and transactional processes. There is considerable interest globally in training professionals on the use and application of these tools appropriate to either operational or transactional areas. It has long been realized that adult learning is at its best when participants are involved in relevant “hands-on” experiments. Six Sigma training has seen the use of class room demonstrations ranging from the use of playing cards, simulations and to the use of sophisticated experiments to illustrate concepts of factorial designs. This paper will focus on a series of simple but modular experiments that were developed over the past two years illustrating the application of all the Statistical tools that are taught as a part of Six Sigma Green and Black Belt body of knowledge.

Software is becoming more prevalent on cars as the number of embedded processors per vehicle increases. Software Engineering used to be considered a “black art” and really was handled that way. It has now been elevated to Engineering status. Software Engineering follows the same principles as any other Engineering practice.