Search Results

A traction electric drive is offered for an industrial tractor. The drive contains the generator, the controlled rectifier, the independent inverters, and two onboard motors. The important feature of the offered electric drive is application of synchronous reactive machines of independent excitation as the generator and traction motors. These electric machines have the following technical features: the generator and motor design is brushless; and simple, the rotor has high mechanical rigidity that raises reliability at high speeds and overloads. There are no windings on the rotor; the motor is designed for ease of manufacture (by expert estimations its price is lower than the squirrel cage induction motor on the order of 15-20 %). The machines have increased efficiency a result of a “cold” rotor design; the motors have high torque overloads capacity (up to 4-6 times the values of nominal torque).

In transport applications, the synchronous motors are used for the power drives, because of their high operating efficiency, and controllable power factor. Brushless electrical machine with DC stator excitation have on the stator the armature and excitation windings. Rotor is a salient pole construction with laminated core and without coils. On base of this machine can be realized the DC machine. In the synchronous mode operation, there is no need the sensor of rotor position. It is need only alternative current (AC) voltage source. The advantages of the synchronous machine with DC stator excitation are: the simple brushless design, and controllable field excitation. In this paper, we consider the physical principle operation of a new machine with DC stator excitation in the synchronous mode operation. For analysis in a synchronous mode operation, the simplified model of electrical machine in steady state condition is used.

Linear electric motors designed on the basis of permanent magnets have disadvantage. It is caused by nonlinear distribution of a magnetic flux density around the cylindrical permanent magnet. Therefore, the motors should be designed with the high level reserve power. It lids to increase of mass - dimensional parameters of a motor. In addition, it complicates a control system of an electric drive on base of the linear motor. These disadvantages are eliminated by using, offered by authors, of three-zoned permanent magnetic structures. Using the three zone magnetic structures on basis Nd-Fe-B permanent magnets allows reducing weight - dimensional parameters of the linear motor. In this paper is considered design technique of creation the tree zone magnet structure. As an example, it was designed linear electrical motor (actuator) for diesel speed electronic controller. Prototype electronic speed controller was build and tested.

The purpose of this paper is to investigate opportunity to create a new type AC induction motor with the salient pole rotor (without winding) and both winding AC excitation and short circuited placed on the stator. There are some advantages in this design: The suggested design has a cold rotor. The stator short circuited and excitation windings are easier for cooling. The rotor has reduced weight in compare with regular induction motor rotor. The short circuit winding can be used for the current control like in the regular induction wound-rotor machines. In this case, the problem maintenance of the slip rings is eliminated. In this paper, we discuss theoretical opportunity for realization the induction mode operation in two and three phase machines. As a base for this, it serves the analyses operation of one phase machine. This analysis is fulfilled in comparison with regular induction motors with short circuited and wound-rotor windings.

The brushless DC motors with permanent magnets are used primarily in law power applications. There are no limits on weight and motor dimensions in considered motors with DC stator excitation. Brushless series connected machine with DC stator excitation do not have rotor coils. Field coil and armature coils are mounted in the stator. Armature windings are connected to DC voltage source trough power transistors commutator. Power transistors are controlled by reflective optical sensors in function of rotor position. In the report, the new principle design of the motor with DC stator excitation is considered. The new principle of design supposes individual excitation for each of the armature phase. Such approach gives an opportunity to design electrical machine with any number of armature phases spaced in phase from each other. In series connected DC machines, the field winding is connected in series with the armature winding.