Search Results

Experiments were carried out on a straight pipe extension of an exhaust port of a multi-cylinder, spark-ignition engine to investigate the axial variation of the steady-state surface heat transfer. Local, steady-state, surface heat flux measurements were made at five different stations on the test section. Based on an optimization procedure developed in this study, the heat-flux measurements obtained for axial distances x / D > 2, were found to be correlated very well (R2 = 0.95) by an equation in the form of an entrance length correction, which is a function solely of x / D, multiplied by the Sieder-Tate convective heat transfer correlation; a correlation valid for fully-developed, steady-state, turbulent, pipe flows. Most importantly, this paper provides strong evidence that the observed heat transfer augmentation in the engine exhaust system is due solely to entrance effects and not due to flow fluctuations, which was the accepted cause.

The Formula SAE® rules require the use of a 20mm intake restrictor. The presence of the restrictor necessitates the design or retuning of fuel and spark strategies that, in turn require the use of a programmable engine control unit (ECU). This paper describes a process used to establish the fuel and spark strategies for a standard production motorcycle engine operating with a restricted air intake. Honda 600cc engines were controlled by three different ECUs: a Haltech, DTA and an “in-house” ECU. Simple calculations of injection duration are suggested to provide a baseline fuel map from which the engine could be started, and then fuel maps are tuned by experiment. Similar baseline numbers for ignition timing are given.