Search Results

In the Army mechanical fatigue subject to external and inertia transient loads in the service life of mechanical systems often leads to a structural failure due to accumulated damage. Structural durability analysis that predicts the fatigue life of mechanical components subject to dynamic stresses and strains is a compute intensive multidisciplinary simulation process, since it requires the integration of several computer-aided engineering tools and considerable data communication and computation. Uncertainties in geometric dimensions due to manufacturing tolerances cause the indeterministic nature of the fatigue life of a mechanical component.

A continuation of the SAEFDE round-robin fatigue test program was conducted to determine the influence of a finer microstructure on monotonic tension, strain-controlled low cycle fatigue, fatigue crack growth, and fracture toughness of A356-T6 cast aluminum alloy. The finer microstructure castings, referred to as material W, were obtained using a water-chilled sand casting procedure. Material W exhibited more desirable ductile behavior than the previous SAEFDE materials X, Y, and Z. Material W exhibited superior smooth specimen low cycle fatigue resistance at both short and long lives, when compared to materials X, Y, and Z. This was due in part to the higher ductility and lower porosity of material W over materials X, Y, and Z. Material W exhibited similar fatigue crack growth behavior, and slightly higher values of fracture toughness at the same thickness when compared to materials X, Y, and Z.

Fracture toughness tests were conducted on the SAEFDE Committee's round-robin A356-T6 cast aluminum alloy materials designated X, Y and Z. Compact type specimens with a thickness of 9.1 and 20.3 mm were tested. Valid Klc values couid not be obtained for 9.1 mm thick specimens but were obtained for 20.3 mm thickness specimens. Due to larger castings, and hence slower cooling rates, a coarse secondary dendrite arm spacing, DAS, of 80 to 90 μm existed in the three materials. Similar Klc values were 18, 16.7 and 17.3 for the A356-T6 materials X, Y and Z respectively. Final fracture surfaces were also similar with predominant cleavage fracture with some localized ductile dimples and secondary cracking.