Search Results

There is randomness in both the applied loads and the strength of systems. Therefore, to account for the uncertainty, the safety of the system must be quantified using its reliability. Monte Carlo Simulation (MCS) is widely used for probabilistic analysis because of its robustness. However, the high computational cost limits the accuracy of MCS. Smarslok et al. [2010] developed an improved sampling technique for reliability assessment called Separable Monte Carlo (SMC) that can significantly increase the accuracy of estimation without increasing the cost of sampling. However, this method was applied to time-invariant problems involving two random variables. This paper extends SMC to problems with multiple random variables and develops a novel method for estimation of the standard deviation of the probability of failure of a structure. The method is demonstrated and validated on reliability assessment of an offshore wind turbine under turbulent wind loads.

This article presents an approach for comparing alternative repairable systems and calculating the value of information obtained by testing a specified number of such systems. More specifically, an approach is presented to determine the value of information that comes from field testing a specified number of systems in order to appropriately estimate the reliability metric associated with each of the respective repairable systems. Here the reliability of a repairable system will be measured by its failure rate. In support of the decision-making effort, the failure rate is translated into an expected utility based on a utility curve that represents the risk tolerance of the decision-maker. The algorithm calculates the change of the expected value of the decision with the sample size. The change in the value of the decision represents the value of information obtained from testing.

A Reliability-Based Design Optimization (RBDO) method for multiple failure regions is presented. The method uses a Probabilistic Re-Analysis (PRRA) approach in conjunction with an approximate global metamodel with local refinements. The latter serves as an indicator to determine the failure and safe regions. PRRA calculates very efficiently the system reliability of a design by performing a single Monte Carlo (MC) simulation. Although PRRA is based on MC simulation, it calculates “smooth” sensitivity derivatives, allowing therefore, the use of a gradient-based optimizer. An “accurate-on-demand” metamodel is used in the PRRA that allows us to handle problems with multiple disjoint failure regions and potentially multiple most-probable points (MPP). The multiple failure regions are identified by using a clustering technique. A maximin “space-filling” sampling technique is used to construct the metamodel. A vibration absorber example highlights the potential of the proposed method.

Importance Sampling is a popular method for reliability assessment. Although it is significantly more efficient than standard Monte Carlo simulation if a suitable sampling distribution is used, in many design problems it is too expensive. The authors have previously proposed a method to manage the computational cost in standard Monte Carlo simulation that views design as a choice among alternatives with uncertain reliabilities. Information from simulation has value only if it helps the designer make a better choice among the alternatives. This paper extends their method to Importance Sampling. First, the designer estimates the prior probability density functions of the reliabilities of the alternative designs and calculates the expected utility of the choice of the best design. Subsequently, the designer estimates the likelihood function of the probability of failure by performing an initial simulation with Importance Sampling.

Sustainability is the effort to preserve at least the same freedoms of choices and levels of resources for our grandchildren that we enjoy today. Mobility is critical to these choices and resources. Transportation today is not sustainable. Yet, before we lose hope, the mobility industry has made large strides to becoming sustainable. The automobile today represents one of the single most sustainable durable products that exist. This paper explores the challenges that automotive engineers will face in the near future in the attempt to achieve sustainability. In doing so, this paper attempts provide automotive engineers to place their contributions to sustainability in an achievable framework.

Reliability analysis of engineering structures such as bridges, airplanes, and cars require calculation of small failure probabilities. These probabilities can be calculated using standard Monte Carlo simulation, but this method is impractical for most real-life systems because of its high computational cost. Many studies have focused on reducing the computational cost of a reliability assessment. These include bootstrapping, Separable Monte Carlo, Importance Sampling, and the Combined Approximations. The computational cost can also be reduced using an efficient method for deterministic analysis such as the mode superposition, mode acceleration, and the combined acceleration method. This paper presents and demonstrates a method that uses a combination of Sobol quasi-random sequences and bootstrapping to reduce the number of function calls. The study demonstrates that the use of quasi-random numbers in conjunction bootstrapping reduces dramatically computational cost.

The Combined Approximation (CA) method is an efficient reanalysis method that aims at reducing the cost of optimization problems. The CA uses results of a single exact analysis, and it is suitable for different types of structures and design variables. The second author utilized CA to calculate the frequency response function of a system at a frequency of interest by using the results at a frequency in the vicinity of that frequency. He showed that the CA yields accurate results for small frequency perturbations. This work demonstrates a methodology that utilizes CA to reduce the cost of Monte Carlo simulation (MCs) of linear systems under random dynamic loads. The main idea is to divide the power spectral density function (PSD) of the input load into several frequency bins before calculating the load realizations.

Inflatable space structures can have lower launching cost and larger habitat volume than their conventional rigid counterparts. These structures are made of composite laminates, and they are flexible when folded and partially inflated. They contain light-activated resins, and can be cured with the sun light after being inflated in space. A spacecraft can burst due to cracks caused by meteor showers or debris. Therefore, it is critical to identify the important fracture failure modes, and assess their probability. This information will help a designer minimize the risk of failure and keep the mass and cost low. This paper presents a probabilistic approach for finding the required thickness of an inflatable habitat shell for a prescribed reliability level, and demonstrates the superiority of probabilistic design to its deterministic counterpart.