Search Results

Electric mobility is an emerging mode of transportation, causing rapid growth of battery pack usage in electric vehicles. These battery packs were limited working life to be used in electric Vehicles. In addition, the disposal is becoming as a major threat to an environment. So, there is a need to increase the working life of battery pack used in electric vehicles to reduce the burden on the environment. In this regard, this paper is focused on studying the life cycle estimation of the battery pack. Battery pack degradation was observed through its self-discharge pattern and also due to the urge to increase the rate of charging. This research study was focused on understanding the degradation rate due to self-discharge and also due to fast charging patterns in battery packs. Estimation of self-discharge is depending on voltage, time and state of charge of the battery pack. Simulation analysis will carry out to evaluate state of charge analysis of the electric vehicle battery pack.

The present research deals with study of pongamia oil methyl ester as a lubricant by blending with anti-wear additive ZDDP. The experimental work carried in this work aims to investigates the friction and wear characteristics by blending zinc diakyldithio phosphates (ZDDP) with pongamia oil methyl ester as lubricant under various loading conditions and temperatures. The coefficient of friction and wear scar depth were determined using pongamia biodiesel blended with 0.3%, 0.6% and 1 % ZDDP by concentration through high frequency reciprocating wear testing machine for 2 h duration. The reciprocating wear tests were performed on an engine liner-piston ring contact under the loads of 40 N, 60 N and 80 N for 2 h duration at temperatures of 100°C, 125°C 150° C with 10 Hz oscillation frequency. The addition of ZDDP with pongamia biodiesel showed marginal reduction in friction coefficient and wear scar depth under all loads and temperatures.

The main objective of the study is to design and analyze casing and supports of a transmission system for an electric vehicle. The system comprises of motors as the power source, constant mesh gear box coupled with limited slip differential as the power transmitting source. The space occupied by the transmission system is a foremost constraint in designing the system. The wear and tear in the system is caused by the gear meshing process and transmission error which lead to failure of the transmission system. This internal excitation also produces a dynamic mesh force, which is transmitted to the casing and mounts through shafts and bearings. In order to overcome such issues in a transmission system, a gear box casing, differential mounts and motor mounts have been designed by the use of CAD-modeling software “SOLIDWORKS”. The designs were imported to FEA software “ANSYS” for carrying out static structural analysis.

Machining of materials has received significant consideration due to the increasing use of machining processes in various industrial applications. In machining, the heat generated in the cutting zone during machining is critical in deciding the work piece quality. Lubricants are widely used to reduce the heat generation. Their usage poses threat to environment and health hazards. Hence, there is a need to identify eco-friendly and user-friendly alternatives to conventional cutting fluids. Modern tribology has facilitated the use of solid lubricants such as graphite, calcium fluoride, molybdenum disulphide, and boric acid as an alternative to cutting fluids in machining. Solid lubricant assisted machining is an environmental friendly clean technology for improving the surface quality of the machined work piece.

Thermal management is one of the most challenging and innovative aspects of the automotive industry. The efficiency of the vehicle cooling framework unequivocally relies upon the air stream through the radiator core. Significant advances in thermal management are being embraced in the field of radiator material and coolant. The radiator shouldn't be exclusively credited for the reliable cooling of the engine. There are other auto parts that play an essential role in keeping engine temperature at a manageable level. The fan-shroud assembly is an important component of the cooling system. While the fan is responsible for drawing in air, the fan shroud's job is to ensure uniform air distribution to the radiator core. By assisting airflow in the engine compartment the fan shroud helps in dismissing excess heat from the engine. This assembly also prevents the recirculation of heated air through the cooling fan.

In Formula Student, the vehicle working parameters are quite disparate from that of a commercially designed vehicle. The inability of teams to incorporate the atypical running conditions in their design causes multiple unforeseen issues. One such condition where the teams fail to improvise upon is the cooling system. Due to the high performance requirement of the competition, multiple teams participating face recurring heating problems. Maximum efficiency from a combustion vehicle can only be achieved when the cooling system is designed to handle the increasing power demand. This paper brings forth a detailed study on the intricate design of the cooling system. The problem has been approached using both theoretical and simulation models. Firstly, NTU-ℇ method was used to calculate the overall heat transfer coefficient and the temperature drop through the radiator core.

In a fastening system when there is a small misalignment of the holes, the holes are enlarged to align the axes and a next size fastener is used to fit the joint. But when the misalignment is large then the enlargement need to be proportionally large. In this case a bushing is press fit onto the hole to handle the fastening. If we press fit a bushing, it generates residual stresses in the panel. These residual stresses reduce the damage life of the components on which the bushings were press fit. In the aircraft engine nacelle components the damage life is very critical in various failure conditions such as fan blade out condition, wind milling and bird strike. It increases the flight time in these events. Here four different case studies were considered to study the damage life of the aircraft components made of Aluminum or composite material.

The present world persists with a twin crisis of energy consumption and the environmental degradation. Finding a compromise between them provides a breakthrough in the research in energy containments of the engine attachments. Oil pump has role of providing the transmission of oil to other engine parts and acts as the coolant for the moving parts. Conventional oil pump with pressure relief valve is its loss lot of energy in oil re-circulation due to the discharge effect. On contrary, the variable displacement oil pump has an effect on reduction of oil pressure using eccentric ring without having any compromise with the energy consumption. This paper proposes model and experimental methodology of a variable displacement Gerotor oil pump for lubricating the internal combustion engine. This particular unit is performed extremely in terms of rotational speed, delivery pressure and displacement variation.

Agriculture is a backbone of country’s economy. To increase the crop production efficiency weeds are to be removed. The present weeding machines are different in dimension which may not be suited to small and medium field farmers, due cost effectiveness and dimensions. This work presents the development of sugarcane weed remover (SWR) and its performance investigation to improve the weed removal rate. The SWR is an application specific machine, it consists of single cylinder air cooled gasoline engine, blade assembly and transmission system. In order to improve SWR efficiency different blade profiles are theoretically analysed. The optimised blade profile is employed in the weed remover which offers fuel consumption of 0.11 g/(KW.h). The SWR on-field experience confirmed that the field capacity and efficiency in weeding is 0.0025 ha/hr and 60% respectively.

Though high thermal conductivity polymer composites are prepared based on the thermal requirements, the effectiveness and overall heat transfer performance of the radiators have to be addressed comprehensively to validate the concerned efforts taken to prepare the high thermal conductivity polymer composites. In this article, theoretical analysis on the thermal performance of the cross flow type heat exchanger under convection is performed only by concentrating on the term thermal conductivity of the material. Micro channel based geometry is extracted from the given heat exchanger problem to reduce the complexities of simulation. The term cooling system performance index (CSPI) is used to achieve the expected targets in the present investigation. For shorter fins, the effect of thermal conductivity on the cooling system performance index under lower Reynolds number is insignificant.

Alternative fuels for both spark ignition (SI) and compression ignition (CI) engines have become very important owing to increased environmental protection concern, the need to reduce dependency on petroleum and even socioeconomic aspects. An appropriate sustainable fuel alternative has turn out to be a main concern and bio-diesel is one of the sustainable fuels. The path of interest in biodiesel has highlighted its advantages which include decrease in hydrocarbon and particulate matter. Meanwhile its shortcoming includes higher emission of oxides of nitrogen. This work is an attempt to develop a mathematical relationship to predict thermal NOx in CI engine fuelled with neat biodiesel. Attention was focused on using in-cylinder pressure based variables to predict NOx. In cylinder pressure measurement is a valuable tool for the analysis of CI engine combustion, which is used for finding the heat release rate, ignition delay, etc.

The desire for higher fuel economy, improved performance and driveability expectations of customers from engines are gradually increasing along with stringent emission regulations set by the government. Many original engine manufacturing companies are prompted to consider the application of higher function variable valve actuation mechanisms in their next generation vehicles as a solution. The VVA is a generalized term used to describe any mechanism or method that can alter the shape or timing of a valve lift event within an internal combustion engine. The VVA allows lift, duration or timing (in various combinations) of the intake and/or exhaust valves to be changed while the engine is in operation. Engine designers are prompted to consider Variable Valve Actuation (VVA) system because of the inherent compromises with fixed valve events. The major goal of a VVA engine is to control the amount of air inducted into the engine which is a direct measure of torque.