Refine Your Search

Topic

Search Results

Standard

Aircraft Indicating Systems

2010-11-15
CURRENT
ARP1088B
This ARP is intended to cover the warning, caution and advisory indicating system required for commercial and military aerospace vehicles.
Standard

Crew Station Lighting - Commercial Aircraft

2019-10-18
CURRENT
ARP1161B
This SAE Aerospace Recommended Practice covers the recommended requirements for the lighting and characteristics of instruments; information plates and displays, emergency, cautionary, advisory and status displays; circuit breaker and toggle switch positions; and the recommended requirements for the utility lighting system.
Standard

Crew Station Lighting - Commercial Aircraft

2002-11-26
HISTORICAL
ARP1161A
This SAE Aerospace Recommended Practice covers the recommended requirements for the lighting and characteristics of instruments; information plates and displays, emergency, cautionary, advisory and status displays; circuit breaker and toggle switch positions; and the recommended requirements for the utility lighting system.
Standard

Color-Coded Incandescent Flange Base T-1 and T-1 3/4 Lamps for Voltage Identification

1998-07-01
HISTORICAL
AS4156A
This document defines the method for voltage identification by the use of color-coded insulators at the base of the lamp. Table 1 shows the design volts and corresponding insulator colors. The part numbers shown are for example purposes only. Insulator colors are to be easily distinguishable as green, yellow, red, and white. Additional colors may be added by a revision process as required.
Standard

Color-Coded Incandescent Flange Base T-1 and T-1 3/4 Lamps for Voltage Identification

2012-12-06
HISTORICAL
AS4156B
This document defines the method for voltage identification by the use of color-coded insulators at the base of the lamp. Table 1 shows the design volts and corresponding insulator colors. The part numbers shown are for example purposes only. Insulator colors are to be easily distinguishable as green, yellow, red, and white. Additional colors may be added by a revision process as required.
Standard

Lights, Instrument, Individual, General Specification For

2016-03-16
CURRENT
AS50571B
This specification covers the general requirements for red and white individual instrument lights. This document has been streamlined. Appendix A to MIL-L-5057F lists those documents required for MIL-L-5057F acquisition and is a mandatory part of MIL-L-5057F. Those documents listed in Appendix A have the same status as those referenced directly in MIL-L-5057F (first tier documents). All other documents, referenced through tiering, may be used as guidance and information to supplement MIL-L-5057F. This document’s scope is limited to lamp source designs solely. Furthermore, the use of red lighting should not be considered for new design and included within this document to support requirements for existing military aircraft that still operate with this system of lighting.
Standard

Lights, Instrument, Individual, General Specification For

2010-01-08
HISTORICAL
AS50571A
This specification covers the general requirements for red and white individual instrument lights. This document has been streamlined. Appendix A to MIL-L-5057F lists those documents required for MIL-L-5057F acquisition and is a mandatory part of MIL-L-5057F. Those documents listed in Appendix A have the same status as those referenced directly in MIL-L-5057F (first tier documents). All other documents, referenced through tiering, may be used as guidance and information to supplement MIL-L-5057F. This document’s scope is limited to lamp source designs solely. Furthermore, the use of red lighting should not be considered for new design and included within this document to support requirements for existing military aircraft that still operate with this system of lighting.
Standard

Design Criteria for White Incandescent Lighted Aerospace Instruments

2007-03-21
HISTORICAL
ARP798A
This SAE Aerospace Recommended Practice (ARP) covers the general requirements and test procedures recommended for use with white incandescent integrally lighted instruments. Its use should provide uniformity of illumination from instrument to instrument and legibility under daylight operation. An appendix is provided to familiarize the designer with some of the techniques used to obtain uniformity of color and illumination in various types of instruments.
Standard

Design Criteria for White Incandescent Lighted Aerospace Instruments

2017-07-19
CURRENT
ARP798B
This SAE Aerospace Recommended Practice (ARP) covers the general requirements and test procedures recommended for use with white incandescent integrally lighted instruments. Its use should provide uniformity of illumination from instrument to instrument and legibility under daylight operation. An appendix is provided to familiarize the designer with some of the techniques used to obtain uniformity of color and illumination in various types of instruments.
Standard

Specification and Inspection of Glass for Integrally Lighted Aerospace Instruments

2000-03-01
HISTORICAL
ARP924A
This SAE Aerospace Recommended Practice (ARP) covers the requirements for the types of glass to be utilized in the fabrication of cover glasses and lighting wedges used in aerospace instruments. It defines the maximum extent of physical defects and recommends standard methods of inspection and evaluation. Definitions of terminology used in this document are covered in 2.2.
Standard

Electroluminescence, Design Criteria and Recommendations for Use in Aerospace Vehicle Crew Station Areas

2002-09-20
HISTORICAL
ARP922A
The scope of this ARP is to provide general requirements for application of electroluminescence to Aerospace Vehicle Crew Station Area instruments and control panels. The design brightness and color recommendations stated in this ARP are intended to apply where a crew station has multiple usage of electroluminescence in both instruments and control panels and when different manufacturers may be involved. These recommendations may also be helpful for the design of individually used displays incorporating electroluminescence, however, this light source has extensive design versatility through variance of manufacturing and operating parameters and the numerous acceptable design recommendations will not be stated herein. Electroluminescence will herein be referred to as EL.
Standard

Electroluminescence, Design Criteria and Recommendations for Use in Aerospace Vehicle Crew Station Areas

2012-02-09
CURRENT
ARP922B
The scope of this ARP is to provide general requirements for application of electroluminescence to Aerospace Vehicle Crew Station Area instruments and control panels. The design brightness and color recommendations stated in this ARP are intended to apply where a crew station has multiple usage of electroluminescence in both instruments and control panels and when different manufacturers may be involved. These recommendations may also be helpful for the design of individually used displays incorporating electroluminescence, however, this light source has extensive design versatility through variance of manufacturing and operating parameters and the numerous acceptable design recommendations will not be stated herein. Electroluminescence will herein be referred to as EL.
Standard

Lamps for Aircraft Lighting

2007-07-09
HISTORICAL
ARP881E
This SAE Aerospace Recommended Practice (ARP) lists the lamps in Table 1 that are recommended for the type of service indicated. This list is not intended as a catalog and does not include many types that are now in use. This specification is not applicable to Solid State Lighting Lamp Assemblies (Based LED lamps). It does, however, reflect current practice.
Standard

Lamps for Aircraft Lighting

2013-10-08
CURRENT
ARP881F
This SAE Aerospace Recommended Practice (ARP) lists the lamps in Table 1 that are recommended for the type of service indicated. This list is not intended as a catalog and does not include many types that are now in use. This specification is not applicable to Solid State Lighting Lamp Assemblies (Based LED lamps). It does, however, reflect current practice.
Standard

Knobs, Control Aircraft, Recommended Design

2017-03-14
CURRENT
ARP493B
This recommended practice is intended to recommend the basic shapes and dimensions for knobs used in aircraft. Two basic types of knobs, the bar shape and the round shape, are described, as well as several widely used variations of these two basic shapes.
X