Search Results

The document provides a definition of skew and disconnect occuring in high lift systems in flight controls including their hazard assessment, describes generic solutions and provides a for specifying requirements.

Scope: This Aerospace Recommended Practice (ARP) provides guidelines for specifying dielectric withstanding strength and insulation resistance design and test requirements for aircraft line replaceable units (LRU's) used within a flight control and/or a utility system. 1.1 Purpose The testing is intended to verify that an LRU can operate safely at its rated voltage and withstand momentary over potentials due to switching, troubleshooting testing, surges, etc.. The testing is also intended to verify adequate design margin of the insulation system and detect workmanship problems.

The scope of this document is limited to encompass terminology, symbols, performance criteria and certain elementary test methods reflecting the current status of the technology.

The scope of this document is limited to encompass terminology, symbols, performance criteria and methods reflecting the current status of the technology.

The scope of this document is limited to encompass terminology, symbols, performance criteria and methods reflecting the current status of the technology.

The scope of this document is limited to encompass terminology, symbols, performance criteria and certain elementary test methods reflecting the current status of the technology.

The scope of this document is limited to encompass terminology, symbols, performance criteria and methods reflecting the current status of the technology.

This SAE Aerospace Information Report (AIR) provides a description of the interfaces and their requirements for generic and specific hydraulic actuation systems used in the flight control systems of manned aircraft. Included are the basic control system characteristics and functional requirements, and the essential interfaces (structural, mechanical, hydraulic power, control input, status monitoring, and environment). Major design issues, requirements, and other considerations are presented and discussed.

This SAE Aerospace Information Report (AIR) provides a description of the interfaces and their requirements for generic and specific hydraulic actuation systems used in the flight control systems of manned aircraft. Included are the basic control system characteristics and functional requirements, and the essential interfaces (structural, mechanical, hydraulic power, control input, status monitoring, and environment). Major design issues, requirements, and other considerations are presented and discussed.

Modern air vehicles consist of many subsystems, traditionally managed as a federation of independent subsystems. Advances in control technologies, digital electronics and electro-mechanical hardware, provide potential opportunities to integrate subsystems for future aircraft. This document does not define any particular integration strategy. Its purpose is to provide information about traditional federated subsystems from the functional, control, resource, and hardware perspective. To be able to integrate subsystems, one must have a basic understanding of the subsystems, and this document provides an introduction or starting point for initiating the integration process.

This SAE Aerospace Information Report (AIR) has been prepared to provide information regarding options for optical control of fluid power actuation devices. It is not intended to establish standards for optical fluid power control, but rather is intended to provide a baseline or foundation from which standards can be developed. It presents and discusses approaches for command and communication with the actuation device via electro-optic means. The development of standards will require industry wide participation and cooperation to ensure interface commonality, reliability, and early reduction to practice. To facilitate such participation, this document provides potential users of the technology a balanced consensus on its present state of development, the prospects for demonstration of production readiness, and a discussion of problem areas within this technology.

This SAE Aerospace Information Report (AIR) has been prepared to provide information regarding options for optical control of fluid power actuation devices. It is not intended to establish standards for optical fluid power control, but rather is intended to provide a baseline or foundation from which standards can be developed. It presents and discusses approaches for command and communication with the actuation device via electro-optic means. The development of standards will require industry wide participation and cooperation to ensure interface commonality, reliability, and early reduction to practice. To facilitate such participation, this document provides potential users of the technology a balanced consensus on its present state of development, the prospects for demonstration of production readiness, and a discussion of problem areas within this technology.

General terms peculiar to aerospace fluid power and control systems are defined in this glossary. Relevant terms have been excerpted from the referenced documents and included herein from the aerospace terms felt to be most useful to the ISO. This is a systems document and the only component-related terms are those significant at the systems level.

This SAE Aerospace Information Report (AIR) presents a review of the types and general characteristics of power sources that may be used to provide the power for gaseous or liquid fluidic control systems. Fluidic definitions, terminology, units and symbols are defined in Reference 2.1.1.

This SAE Aerospace Information Report (AIR) presents a review of the types and general characteristics of power sources that may be used to provide the power for gaseous or liquid fluidic control systems. Fluidic definitions, terminology, units and symbols are defined in Reference 2.1.1.

This AIR concerns itself with the end use of Fluidic (or Flueric) control hardware on aerospace vehicle applications. The fluidic control hardware application is viewed as a system comprised of the following subsystems: Power Source Power Conditioner Fluidic/Flueric Control(s) This AIR identifies potential power sources and relates the design of the fluidic/flueric controls to the nature of both the power source and, as required, the power conditioner. In the unlikely event that the power source yields a fluid which is always at the desired pressure level, temperature range and flow rate capacity and, further, is free of particulate or liquid contaminate, pressure pulsation, etc., no power conditioner is required. Experience has shown that the power conditioner is usually necessary to assure operability and reliability of the total control system.

This SAE Aerospace Information Report (AIR) outlines comprehensive aircraft flight control system fault isolation methodology that has proven to be effective. The methodology presented in this Information Report has been used in several successful fault isolation efforts on military aircraft.

This SAE Aerospace Information Report (AIR) outlines comprehensive aircraft flight control system fault isolation methodology that has proven to be effective. The methodology presented in this Information Report has been used in several successful fault isolation efforts on military aircraft.

Modern air vehicles consist of many subsystems, traditionally managed as a federation of independent subsystems. Advances in control technologies, digital electronics and electro-mechanical hardware, provide potential opportunities to integrate subsystems for future aircraft. This document does not define any particular integration strategy. Its purpose is to provide information about traditional federated subsystems from the functional, control, resource, and hardware perspective. To be able to integrate subsystems, one must have a basic understanding of the subsystems, and this document provides an introduction or starting point for initiating the integration process. The focus is on the aircraft subsystems, which includes utility, flight and propulsion control (e.g., electric power, environmental control subsystem (ECS), fuel, etc.) The depth of the information intends to provide an introduction to the subsystems.

This Aerospace Information Report (AIR) provides information on systems integration rigs, commonly referred to as “Iron Birds” for aerospace applications. a It includes background historical information including descriptions of Iron Birds produced to date, important component elements and selection rationale, hydraulic system design and operational modes and illustrates the design approaches to be considered. b It provides illustrations of the various systems that should be considered for Iron Bird testing in the development phase and utilization during the production program. c It includes recommendations for simulation, component development tests, system integration and lessons learned.